GE/GE_Thumb/00115502i02.gif
See part 292 in the diagram
Replacing your General Electric Range Broil Element - 240V play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Broil Element - 240V

★★★★★
★★★★★
4 Reviews
$101.35   Special Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS249236
Manufacturer Part Number WB44K10002
Manufactured by GE
Product Description

Broil Element - 240V Specifications

This broil element is found on the roof of the oven.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when broiling | Element will not heat
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB44K10002 replaces these:
AP2030962, 876000, WB44K10002
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Larry
    July 9, 2021
    How do I order the boiler holder that keeps the boiler from falling down
    For model number RB787WHW
    Hello Larry, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS223060. We hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your General Electric Range Broil Element - 240V

      Replacing your General Electric Range Broil Element - 240V play video
      Customer Repair Stories
       Average Repair Rating: 3.4 / 5.0, 11 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Broiler burnt out.
      Removed screws using nut driver. Pulled element way forward until wires came through. Pondered how to detach burned out element from wires. Chickened out, call neighbor who grasped things firmly with two hands and pulled. Old element came loose. Popped in new element. Cursed the screws that wouldn't align with holes to support element; finally did it. Screwed element plate in place. Put oven door back on, plugged it in and turned it on hoping that we hadn't reversed the wires. Job accomplished.
      • ellen from centennial, CO
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver
      • Parts Used:
        WB44K10002
      18 of 21 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broiler element was burned out
      After turning the power off to the range, it was as simple as removing the screws for the broiler itself and the bracket and plugging in the new element. Yes, it was that easy.
      • Ursula from Suffolk, VA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver
      • Parts Used:
        WB44K10002
      10 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broiler Element Wouldn't Heat
      The broiler uses two male slip-on connectors that attach to two wires with female connectors in the stove. When removing the broiler element, I discovered that one of the two wires was burned in half specifically where the wire crimped to the female connector. This is abnormal and raised some concern. However, I deduced that the terminal crimp from the factory must have been defective and the wire nicked or cut in order to produce enough heat at that point for the wire to burn and fail. The female crimp terminal is a special, solid right angle design that I was unable to locate locally even at an electrical wholesale distributor. A straight terminal connector was used and crimped after stripping a new section of the wire. Heat will melt solder. You must use a high quality crimp connector and tool. The connector was then very carefully angled down slightly to maintain a safe distance from the back shield of the stove to the wire when in place. The new broiler works fine. There was likely nothing wrong with the old one. Just a wiring issue.
      • Ranse from Layton, UT
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Nutdriver, Pliers
      • Parts Used:
        WB44K10002
      10 of 11 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The broiler element wouldn't work.
      After I ordered a new element unit, I read the "do it yourself" review on the page. I took the back off of the range and found the broken wire. I found that I had the same problem with the wiring, and that maybe the element was not the problem. I went to Lowe's and purchased a female spade connector, because no one would sell me one through the parts department. All I did was cut off the wire at the end of the burned section, stripped back about 1/2 inch of the wire and put on the new spade connector. I took off the origonal connector/crimp, and slipped on the new one. (You do have to make sure that the wiring doesn't touch the range back) The element was not the problem, so the origonal one still works fine. I may keep the element I ordered, just to have it if this one goes out. I didn't even need to remove the screws from the element inside the oven. It can all be done from the back of the range.
      • Lajuanna from O'Fallon, IL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Pliers
      • Parts Used:
        WB44K10002
      5 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      change broiler element
      removed 2 1/4in. drill screws holding broiler element to oven removed 2 1/4in.drill screws holding broiler element to top of oven removed female spade connectors ffom old element and reversed assembley very easy
      • lee from bethel, CT
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver
      • Parts Used:
        WB44K10002
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broiler not working
      Turned off electricity. Removed two screws that held the element in back of oven. Removed the two screws that held it up to top of oven. Disconnected the two wires that held it in the rear of the oven. Removed it from the top support. Replaced the old element with the new in the support. plugged it it, replaced all four screws. Turned on the electricity and turned on the oven-it worked!
      • Teresa M from denver, CO
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver
      • Parts Used:
        WB44K10002
      4 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      burned out broiler element
      Don't forget to unplug and/or turn off the main breaker!
      • Amanda from Thornton, CO
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WB44K10002
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broiler element was sparking
      I removed oven door so i could reach easier. Then removed screws from Broiler element at the back of the oven. Pulled off connected wires. Slid wire connectors on new element and screwed bracket in.
      • jeff from NEENAH, WI
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver
      • Parts Used:
        WB44K10002
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      When I took out the baking element, the wires went up inside because they were so short, I got a hold of one of them but couldn't get a hold of the other.
      Had to pull out the refrigerator and put it in the dining room in order to pull out the stove to be able to get to the back of it. Had to take off the back of the stove to get to the wiring for the baking element, so at that point I replaced the broil element at the same time. Not a easy job at all.
      • Daniel from SPRINGFIELD, OR
      • Difficulty Level:
        Very Difficult
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Screw drivers, Socket set
      • Parts Used:
        WB44K10005, WB44K10002
      1 person found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      broiler unit went out
      less then ten minutes, used a electric screw driver and in a snap, finished, I always buy my parts on line at parts select my stove is old but in good condition except parts give out sometimes and I just order part and keep on cooking.
      • helen from PRINCETON, NC
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        WB44K10002
      1 person found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      4 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        4
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS249236
          Manufacturer Part Number: WB44K10002
          Brand
          Model Number
          Description
          General Electric
          137480
          Range
          General Electric
          137481
          Range
          General Electric
          15451-0
          Range
          General Electric
          154510
          Range
          General Electric
          155910
          Range
          General Electric
          157710
          Range
          General Electric
          15781-0
          Range
          General Electric
          157810
          Range
          General Electric
          15785-0
          Range
          General Electric
          157850
          Range
          General Electric
          15786-0
          Range
          General Electric
          157860
          Range
          Kenmore
          36261101000
          Range
          Kenmore
          36261101001
          Range
          Kenmore
          36261108000
          Range
          Kenmore
          36261108001
          Range
          Kenmore
          36261741000
          Range
          Kenmore
          36261741001
          Range
          Kenmore
          36261742000
          Range
          Kenmore
          36261742001
          Range
          Kenmore
          36261748000
          Range
          Kenmore
          36261748001
          Range
          Kenmore
          36262492000
          Range
          Kenmore
          36262492001
          Range
          Kenmore
          36262780100
          Range
          Kenmore
          36262780101
          Range
          Kenmore
          36262780102
          Range
          Kenmore
          36262780103
          Range
          Kenmore
          36262781000
          Range
          Kenmore
          36262781001
          Range

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service