This light bulb is sold with the socket. The bulb is 120V and 25W.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Won’t turn on
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB36X951 replaces these:
AP2029991, 260392, WB36X0951
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Original lamp burned out.
After looking up on the computer a schematic of the unit, all that was needed was removing four screws to remove the top and side cover which was one piece. Next was removal of electrical connection to burned out lamp, then removing burned out lamp and installing the new lamp and reconnecting electrical connection. Job was complete after reinstalling the cover.
Microwave now working with new lamp lighting when in use.
Other Parts Used:
Rudy from Huntington, IN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
72 of 88 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light burned out
I happen to have a set of "security" screw driver tips which are required for this appliance - available for about $10 at Home Depot or Harbor Freight. Remove three security screws from back of housing, lift up and aft to remove the cover. The light is on the left in a "snap in" mounting so use a flat blade screw driver to push back the retainer and lift out the old bulb then disconnect the two "push on" wires and install the new light. Total time about 10 minutes. The only issue is the requirement for a security driver set.
Other Parts Used:
Jerry from CRAWFORDVILLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light burned out
removed 3 screws to take off outer housing ( did not have proper screw driver but was able to remove with pliers). used flat head screw driver to pry light socket w/bulb off of snap-in mounting & unplugged socket wire attachments. plugged in & reattached new part.
Other Parts Used:
David from Pittsburgh, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door switch broke
Went on line and saw the Video - very simple to follow - very easy to remove and install the new switch -- went like a breeze!
Other Parts Used:
J Theodore from RESTON, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maria
October 11, 2017
When I plug it in there's nothing going on. Panel off, no lights, no sound.
For model number JES1384SF07
Hi Maria,
Thank you for your question. There are a couple of parts that you may want to check. I will caution you when attempting any repairs on a microwave though. There is a capacitor inside your microwave that even with your power turned off, has a stored charge that could hurt you. You have to safely dispel that charge. The parts that you should look at are your door switches, your cavity thermostat, and your fuse as well. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marcy
16 days ago
The following model number (JE2160SF01 is noted inside my GE Profile built in microwave which was part of the GE package when I built my home in 2005. I'm not sure why it can't be found, so I used model number JE2160F001 in order to be able to submit my question. It might not be found because of the age or part of a packaged deal when I built my house.
The interior light went out, so I need to replace it. I've seen one video on how to replace the bulb. There are several parts that need to be removed before getting to the bulb, but I need to know if the capacitor needs to be discharged to replace the bulb. It will need to be unplugged from the built in cabinet to be removed to get to the back. Does the capacitor need to be discharged to replace the interior bulb?
For model number JE2160SF001
Hi Marcy, thank you for reaching out. The light bulb for your model is part number PS247776. Before replacing the light bulb, we would suggest discharging the high-voltage capacitor. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
