Sold individually. This part is located beneath the element and catches any spills.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Wall Oven.
This part works with the following products:
Kenmore, General Electric, Hotpoint, Roper.
Part# WB32X106 replaces these:
AP2028217, 2324, WB32X106, 229769, 231928, 281349, 281350, 292975, 294922, 304969, 304978, 310932, 318399, 330686, 4336385, 640609, 8004682, 8008, K15018, PM32X0106
...
Show more
, PM32X106, WB31M0002, WB31M2, WB32K10035, WB32X0106, WB32X5038, WB32X5049, WB32X5063, WB32X5073
Show less
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Christopher D - April 20, 2021
Verified Purchase
Perfect fit
Original pan was in poor condition after much use. The new element pan was a perfect fit and match.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 15 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control switch did not function and one burner worked only occasionally
First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access.
Could not find the correct replacements (burners & drip pans)
After months of buying the wrong parts & cost I discovered this site So easy to order & quick delivery, plus very easy installation. Thank you. I also wanted to add that the reps (Tanisha & Matthew) were extremely helpful & informative. I can only hope all the reps equal their performance. I will definitely be using this site, before any other source. Knowledge & cost is also important to me & that need was met. Good job!
tries brazing ends back onto posts...it did work but still not as good as I wanted. Bit the bullet for 100.00 and bought 2 new burners and drip pans. Only regret was not buying the two smaller burners with pans. Smaller ones still work but the new ones work like brand new and an added benefit is they make the stove look brand new!! Very pleased with decision to buy!
Removed the burner elements, removed and disposed of old drip pans, cleaned the area, relaced with new drip pans and replaced the burner elements. Verified all burners were level - good as the day it was new!
I got the old stove (27yrs) from a family member and right off had trouble finding parts. Once I had the book it came with It got a little easier. I got one part from sears. After that I went on line to find the other parts I wanted. I`m very happy with this site and next time I will go here first.
I pulled off the electtic burners ( the coiled part that heats) and replaced the the drip bowls . I cleaned the knobs so well the numbers came off 2 so I replaced them as well
A tenant left the Drip Bowls in an uncleanable state. I could not find a suitable replacement..
Most trainable people can pull out the heating elements and replace the Drip Bowls. The great thing about the ordered drip bowls was that they FIT! Most drip bowls sold as easy replacements for GE or Hotpoint appliances do not fit and wobble the heating element or drip bowls. If not fitting correctly, the tenant usually destroys the heating element and the drip bowl.
Burners wouldn't sit right in drip pans. Melted a plastic container on a burner.
Make sure all burners are off and cool to the touch Lift up on the burner coil and pull to the side Lift out the drip bowl Gasp at how dirty it is Dispose of dip pan in recycle bin Wash the gunk off your stovetop, then wash your hands! Replace the drip pan so that the hole is over the plug in area Replace the burner coil by poking it into the hole and fiddling around with it until it engages. Push it firmly into place. Admire your work, go fix a cold drink and put your feet up Feel good about your home repair skills!
Needed new drip bowl, was very hard to find one that fit my stove
Installed easily, was most impressed with the speed of delivery and it was the perfect size!!
Other Parts Used:
Rosemary from BROOKFIELD, CT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ellen
December 3, 2018
This is quite an old range. I got replacement drip bowl an element from home depot. The labels said “fits most GE models”. The 6” bowl and element fit but the 8” pair were about 1/4 of an inch too big. Will this fit my old range.
For model number Cs57-01
Hello Ellen, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS244697 for the small bowl and PartSelect Number PS244696 for the large Bowl. The Small Element is PartSelect Number PS244017 and Large is PartSelect Number PS244016. Thank you for your inquiry, good luck with this repair!
Hello LuAnn, Thank you for the question. The Drip Bowls are made from Chrome. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
July 15, 2019
Which 8 inch drip pan fits my cooktop?
For model number JP676001
Hi Jeff,
Thank you for your question. The part number listed under your model number for the 8 inch drip pan is PS244696. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Judith
July 9, 2021
Will this drip pan fit my GE compact electric free standing electric range? All the pans I've purchased said they were going to fit but were too big.
For model number RA720K5WH
Hello Judith, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS244697 for the Small Bowls and Part #: PS244696 for the Large Bowls. We hope this helps!
I have an electric flat top service stove . Well my stove top works but my oven does not turn on anymore . The electric buttons will not work . What do i need to fix this problem?
Hi Elizabeth,
Thank you for your question. If your oven is not heating, the part that fixes this issue the majority of the time is the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to turn the elements on and off. To verify if the oven sensor is preventing the oven from turning on, you will need to unplug the oven from the electrical outlet and remove it from the oven to test it for continuity with a multimeter. In order to test it, you will need to reference your owner’s manual to determine the correct reading for your model, as this varies from model to model. To test for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will then need to check the electronic control board, the elements and wiring between the parts to see which one is causing the issue. We hope this helps! Good luck with the repair!
Was this helpful?
Thank you for voting!
Jackie
August 23, 2023
I’ve purchased 2 drip pans so far and both were bigger than my old one
For model number RA524W2
Hi Jackie, thank you for reaching out. According to our research, we have found that your model comes with two different drip bowl having size 6 inches part number is PS244697 and 8 inches part number is PS244696. Make sure you are using the right drip bowl in the right position. We hope this information is useful!
The diameter of my burner pans are 7.5 inches and 9.5 inches. I put in my model number but these pan came up and are smaller than mine. Where can i find the burner pans for this Hotpoint model?
For model number KA724K1WH
Hello Vanessa, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
James
February 3, 2020
Front left burner won't lite
For model number 79075863302
Hello James, Thank you for the question. This sounds like the Burner Igniter will need to be replaced. The igniter is sold as part of the Orifice Assembly, PartSelect Number PS2332312. We hope this helps.
This is the drip bowl for your range or cooktop. The drip bowl sits beneath the burner of an electric range and collects any spills during cooking. The bowl is 6 inches in diameter and represents the smaller burner for y...
