Part Location Diagram of WB32X10013 GE Drip Bowl - 8 Inch
See part 119 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Drip Bowl - 8 Inch

$8.40
  Special Order
PartSelect Number PS244680
Manufacturer Part Number WB32X10013
Manufactured by GE
Product Description

Drip Bowl - 8 Inch Specifications

This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB32X10013 replaces these:
AP2635055, 7, 19950018, WB32X0004, WB32X0010, WB32X0013, WB32X0014, WB32X0019, WB32X0025, WB32X0033, WB32X0034, WB32X10, WB32X10013R, WB32X13, WB32X14, WB32X19, WB32X25, WB32X33, WB32X34, WB32X34A ... Show more , WB32X34R, WB32X4, WB32X501, WB32X5012, WB32X5013, WB32X5027 Show less
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 34 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Needed to replace Drip Pans and Trim Rings for old stove
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!

Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct parts.
Other Parts Used:
Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Cynthia from Tampa, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
39 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Drip bowls and Rings
Received the Drip bowls and Rings very quickly. Opened the box and then cut open the plastic wrap that the individual rings and drip bowls were in. Lifted the burner on the stove top, took out the old ring and drip bowl. Installed the shiny new drip bowl and ring, then lowered the stove top element back into place. I was able to replace all 4 of them within 5 minutes. Made the 30 year old stove look brand new.Thank you for perfect fit parts and fast delivery.
Other Parts Used:
Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Joe from Oakley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip bowls WAY out of style
So this ancient stove we inherited when we bought our house had the drip bowls wrapped in tin foil. We've searched EVERY (not joking) store in our area for drip bowls that would fit it, but apparently Hotpoint wanted to make sure you could never do this - well, at least not easily. No one, not one store carries drip bowls to fit it. I finally searched online and partselect.com came up first on the list. I was amazed they had the right part! Better yet, ordering was beyond easy, and they came super quick. Popped in the parts in less than 2 minutes, and we're good to go - makes this old stove look new! (well, if this was the 80's, lol) When I clicked on the part it said which stoves it would fit, which was also very helpful. Thank goodness for Part Select! Otherwise we would've had to rewrap those disgusting old bowls... I'd recommend this site in a heartbeat!
Other Parts Used:
Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Joanna from Fargo, ND
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trim Ring - 8" didn't fit right and Drip Bowls were not cleanable any more
Replaced all the ordered parts, and straightened a bent "rest piece" (one of three) on the element os the large burner, which made it rest perfectly on the new Trim Ring. It doesn't easily fall down into the bowl now while I am using the burner. The new Bowls look so nice, and the stove looks nearly new!

I now know where to go for help when I need to repair appliances. You seem to have everything that could possibly be needed. Thank you!
Other Parts Used:
Drip Bowl - 6 Inch Trim Ring - 8 Inch
  • Bonnie from Anchorage, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 main burners would not heat - connectors on elements were corroded
Removed old heating elements and drip bowls and replaced. Doesn't get much easier than that. parts deleivered in 1 day (even though I chose the slow delivery option) and was fixed that day - Wife HAPPY - me happy!
Other Parts Used:
8 Inch Surface Burner Element
  • James from Dixon, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed To Replace Drip Bowl
I just replaced them.
Other Parts Used:
Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • DIANA from TINTON FALLS, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced old burners
Both the eight inch burner and the the six inch burner were not an exact fit. I used the old rings and the new burners. The eight inch burner fit well with the new drip bowl;however, the six inch burner did not fit with the six inch drip bowl and I had to grind off about an eigth inch from the diamiter of the drip bowl. I replaced most all the wiriing and after I get the lower oven element rebuilt it will be ready for a test drive ..can't wait!
Other Parts Used:
Drip Bowl - 6 Inch Tilt Lock Hinge Mounted Surface Unit - 6" Tilt-Lock Hinge-Mounted Surface Burner - 8"
  • Terry from Ulen, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner rings and drip pans stained
Lifted burner element to remove pressure on ring and drip bowl. Removed old parts and replaced in reverse order. This not intended to sound sexist, but my wife who is not particularily mechanically inclined performed the task on her own.
Other Parts Used:
Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Tommy from Hydro, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner went out and wanted to update look.
Changed out the burner element and then updated all of the centers on the remaining elements. changed out the rings and the pans and now the stove looks new. Thanks for the fast shipping. Brett
Other Parts Used:
Center Piece - 6 Inch Burner Center Piece - 8 Inch Burner Drip Bowl - 6 Inch Surface Element - 6 Inch - 240V
  • Brett from Baton Rouge, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer service
Customer service is great. Fast shipping. Great communication. I have them bookmarked from a previous order. Same good service as the first time. Thank you.
Other Parts Used:
Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Patricia from San Jose, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pascha
November 5, 2017
Hi, i have a Hotpoint electric range, the model number of the stove is rb5250j4ad and it has 3 small burners and one large burner.I need to replace the drip pan and ring on the large burner. i have selected the following replacements at your website: ps244479 and ps244680. would you be able to confirm that these are the correct items for my model before i proceed with completing my order? thank you. best regards!
For model number RB525*J4
PartSelect logo
Hi Pascha, Thank you for your question. Yes, those would be the correct parts for your appliance. Good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS244680
Manufacturer Part Number: WB32X10013
Brand
Model Number
Description
General Electric
107FG50G
Range - GE Range/Stove/Oven Model 107FG50G Parts
Hotpoint
107RB590G
Range - Hotpoint Range/Stove/Oven Model 107RB590G Parts
Hotpoint
107RC36B
Range - Hotpoint Range/Stove/Oven Model 107RC36B Parts
Hotpoint
107RC445F
Range - Hotpoint Range/Stove/Oven Model 107RC445F Parts
Hotpoint
107RC690H
Range - Hotpoint Range/Stove/Oven Model 107RC690H Parts
Hotpoint
107RC75A
Range - Hotpoint Range/Stove/Oven Model 107RC75A Parts
Hotpoint
107RC85A
Range - Hotpoint Range/Stove/Oven Model 107RC85A Parts
Hotpoint
107RF38-E
Range - Hotpoint Range/Stove/Oven Model 107RF38-E (107RF38E, 107RF38 E) Parts
Hotpoint
107RHV755J
Range - Hotpoint Range/Stove/Oven Model 107RHV755J Parts
General Electric
107RHV786J
Range
General Electric
108RA220E
Range - GE Range/Stove/Oven Model 108RA220E Parts
General Electric
108RB15A
Range - GE Range/Stove/Oven Model 108RB15A Parts
General Electric
108RB18A
Range - GE Range/Stove/Oven Model 108RB18A Parts
General Electric
108RB545-G
Range - GE Range/Stove/Oven Model 108RB545-G (108RB545G, 108RB545 G) Parts
General Electric
108RB646H
Range - GE Range/Stove/Oven Model 108RB646H Parts
General Electric
108RS40J
Range - GE Range/Stove/Oven Model 108RS40J Parts
Hotpoint
109RB42
Range - Hotpoint Range/Stove/Oven Model 109RB42 Parts
Hotpoint
109RD23
Range - Hotpoint Range/Stove/Oven Model 109RD23 Parts
General Electric
1J245W1N1
Range - GE Range/Stove/Oven Model 1J245W1N1 Parts
General Electric
1J4021M1
Range - GE Range/Stove/Oven Model 1J4021M1 Parts
General Electric
1J4021M2
Range - GE Range/Stove/Oven Model 1J4021M2 Parts
General Electric
1J4021M3
Range - GE Range/Stove/Oven Model 1J4021M3 Parts
General Electric
1J4021M4
Range - GE Range/Stove/Oven Model 1J4021M4 Parts
General Electric
1J4021N1
Range - GE Range/Stove/Oven Model 1J4021N1 Parts
General Electric
1J4021N2
Range - GE Range/Stove/Oven Model 1J4021N2 Parts
General Electric
1J4021N3
Range - GE Range/Stove/Oven Model 1J4021N3 Parts
General Electric
1J4081N1
Range - GE Range/Stove/Oven Model 1J4081N1 Parts
General Electric
1J4081N2
Range - GE Range/Stove/Oven Model 1J4081N2 Parts
General Electric
1J4081N3
Range - GE Range/Stove/Oven Model 1J4081N3 Parts
Kenmore
20131
Range - Kenmore Range/Stove/Oven Model 20131 (1988) (20131(1988)) Parts
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service