This drip bowl, also known as the drip pan or burner bowl, is 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in total diameter to its outer edges. This authentic manufacturer-approved part is used to catch spills from cooking on the top burner. If your bowls are getting stained, dirty, or rusted, this replacement can solve it. First, remove the element from the stove top, and pull out the old drip pan. Insert the new bowl and make sure it is aligned to where the element is plugged in. Lastly, you can put the element back in. For safety precautions, make sure to unplug the range from the power source and wait until the surface is cool before replacing this part. This part is sold individually, if you are replacing more than one drip bowl on your stove at once, you will need to account for this. To replace, simply pull the old surface elements and burner bowls off, give everything a thorough clean, and install the new parts with no tools necessary.
This was about the simplest fix I've ever done. Just pulled off the old surface elements & burner bowls, wiped down the range top, and put in the new parts. Perfect fit. No problems at all. $$ well spent. ParsSelect shipped quickly, and they arrived well packaged. A+ experience all around. Thanks PartSelect. JA, San Ramon, CA
Watched a repairman do it the last time for $200.00. This time I unplugged the stove, unscrewed four screw nuts holding the upper rear cover, unplugged old wires, reconnected new ones, fed them thru to the front, attached them to the new block, screwed the block into place, replaced back cover, stuck the element into place, made my little brother plug it back in and turn it on first. It worked. Cost me $20.00 to do what the repairman did the last time. I also replaced the reflector pans. No-brainer.
PartsSelect is the BEST!! This is the second time I've had to use them on home appliances. Their web site was easy to use, shipping was fast, prices competitive and instructions very easy to follow. I would not hesitate to use them again. Very happy with service from the get-go.
Simply replaced the drip pans. Came to realize that I had the skill set.
First dressed out with my hard hat, work gloves, dust mask then locked all the doors to prevent intruders from disturbing my concentration. During the installation took video for you tube broadcast and then invited friends and neighbors to witness the accomplishment! Made a sloppy soup to see how the drip pans worked. A+. Received quite a few back pats and atta boys. Most challenging aspect to this endeavor was unwrapping the packaging which was well done thank you. The whole experience left me refreshed and ready to take on the world! Thanks for asking!
Ask our experts a question about this part and we'll get back to you as soon as possible!
16 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
July 20, 2017
Why does mine have more notches than yours is that an update problem or something? Also I need it in black not chrome. Do you have it in other colors?
Hi Fred, the 6-inch black burner bowl is found here WB31T10014, and the 8-inch black burner bowl is found here WB31T10015. It is designed to not have only one slot for the element to sit in, but will function the same as the previous version. I hope this helps!
18 people found this helpful.
Was this helpful?
Thank you for voting!
Barbara
November 12, 2017
The measurements I have found for this model don't match my measurements. The stove openings without drip pan are 6 1/2" & 8 1/2". I'm seeing " 6 & 8". Will this work. The dip pans measure 7 3/4" & 9 3/4" in diameter. Also, can I get enamel pans instead of chrome that fit my model?
For model number RB757WH4WW
Hi Barbara, Thank you for the question. Yes these are still correct. They may have took the measurements from the elements that sit over the bowls. They do offer the Grey Enamel PartSelect Number PS244396 and PartSelect Number PS244397. For Black we have PartSelect Number PS244398 and PartSelect Number PS244399. Hope this helps!
Trying to replace this part and ive never done it before. I got my new burner pan in the mail and opened it up and stuff but now I have to remove my element and Im scared to break something. How do I take it out?
Hi RJ, make sure your unit is disconnected from the power source, and cool to the touch. Grab the burner from the opposite side of the socket with both hands. Simultaneously tug and lift the burner away from the plug. You may need to wiggle it to get it loose. Please let us know if you have any further questions.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
January 21, 2018
I have purchased new drip pans from local stores. When I tried to install them, I found that the burner coils did not fit. There are 3 pieces on each coil that used to fit in slots on the drip pans. Now there are no slits on the pans and everything is crooked (the cooking pans are very slanted). Do I have to buy new coils as well as drip pans to make them fit?
For model number JBS27WC2WW
Hello Linda,
Thanks for your question. The elements have been updated by the manufacturer over several iterations, so you may need new coils as well. Make sure that the element is in place all the way, and ensure the prongs on the element meet the slots of the burner bowl. If they still do not fit, you may want to order new elements.
I hope this helps.
What type of drip pans should I purchase for this type of stove?
For model number JSP34WW4WW
Hello Lisa,
Thanks for your question. The 8-inch drip bowls for your model are part number PS244395 while the 6-inch drip bowls for your model are part number PS244394.
I hope this helps.
It is a drip pan brand name Kenmore/Electrolux home products this is what it stated on the stove, can you help? Thank you
For model number 790.94001400
Hello Maria, Thank you for contacting us! Upon reviewing the model number provided I show the part number for the two 8 inch drip bowls as PS437595 and the 6 inch as PS470124. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Edith
November 12, 2019
Do you have replacement burner bowls in black for my old stove?
For model number JMP31WC3WW
Hello Edith and thanks for writing.
We do not have the black ones that match up with your model.For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the unit directly. Once you get the information you need, we should be able to find the information on our site for you. Hope this helps.
We hope this helps. Please contact us at any time
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob Romberger
July 7, 2021
I'm looking for drip bowls for a chambers electric cooktop. I can't find a model number anywhere. The small bowls for the 6 inch element are 8 inches in diameter overall. What is the largest bowl for a 6 inch element that you have in ss or chrome?
Hi Bob,
Thank you for your question. We do carry 6 chrome drip bowls that have an 8 inch diameter. The part number listed for the drip bowl is PS437596. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Will the 6-inch BLACK burner bowl WB31T10014, and the 8-inch BLACK burner bowl WB31T10015 fit my GE JDP39BK3BB range?
I am trying to replace my current chrome drip pans (WB31T10010 and WB31T10011.
For model number GE JDP39BK3BB
Hi Kent,
Thank you for your question. Yes, these would be the correct burner bowls for your range. If you would like to place an order for them, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Patricia
January 31, 2023
Will the black enamel pans part #PS244397 fit my stove?
For model number JMP31WC3WW
Hi Patricia,
Thank you for your question. The part number listed under your model number for the 8-inch black burner bowl is PS244399. The part number listed for the 6-inch black burner bowl is PS244398. If you would like to place an order for these parts, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
This Drip Bowl, also known as a burner bowl or drip pan, is made to fit an element 8 inches in diameter and comes in chrome. The actual total diameter of this drip bowl is closer to 10 inches, but don't worry, it will fi...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS244394
Manufacturer Part Number: WB31T10010
