Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Karen G - February 8, 2020
Verified Purchase
Four star rating. Easy Repair. The part was perfect.
The part came the next day I ordered it. My husband installed the next day and it is now working perfect. Thank you
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Coil Burned Out
Open lid,un screw coil,pop in new coil snap holders in place,then cook a steak
Other Parts Used:
Frank from St Augustine, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
60 of 91 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element burned out.
Unplugged range. Opened oven door and removed two screws from top of oven opening. Lifted oven top and propped up with a 2 x 3.Unscrewed the two screws that were holding
Other Parts Used:
LANCE from ORELAND, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
41 of 62 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The small burner inside the double burner shortd out.
The first thing was to watch U-Tube . The replacement burner was being replaced in a GE glass top range. Exter tools were required than depicted in the U-Tube project. The project overall was not dificult for me however I was a general contracter for over 25 years
Other Parts Used:
david from PORT ORANGE, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Small front burner on our glass top stove died.
Robert did not do the repairs. I did! 70 year old housewife. I watched a Utube video and thought I could certainly handle that. Ordered my part from your site. It came in two days. Burnet was replaced in under 20 minutes by me! Anyone can do this. Super easy, parts just plug in.
Other Parts Used:
Robert from FLEMING ISLE, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner no longer heats
Remove two screws with nut driver that holds range top down. Turn off breaker or unplug before lifting top. Brace top with 2x4. Take picture with cell phone just in case. Orient replacement part with old burner. Remove one wire at a time and install on new burner in corresponding correcting terminal. be sure they are snug. Drop top install nuts . Test! Done! I am not an electrician!!!!!!!! Please do not publish !!!!
Other Parts Used:
Anthony from Apopka, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner burned out
Very easy. Unpluged range from outlet, took two screws from the front under side of the range top, raised cook top up, took off four wires from burner, removed two screws than holds burner on cook top, replaced with new burner, installed two screws that hold burner in place, installed the four wires to burner, lowered cook top back into place replaced two screws that hold cook top down, pluged back into outlet. DONE!
Other Parts Used:
Daniel from Norborne, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out
Remove two screws to loosen the ceramic top....prop top open and change part...the part was exactly the same...change wires from one to the other and transfer clamps.....1st grade craft class would have done it in half the time I did......you folks have your parts inventory and description application to a science.....God Bless
Other Parts Used:
Dean from Elkton, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner didn't work
lift stove top, 2 undermount screws. Then unplug 4 wires, I did them 1 at a time plugging into new burner as I go so I wouldn't screw up. Take 2 screws out of old burner to stove top, # all around circle put screws in same # on new burner.Done Good experience all the way around. Order delivery and install
Other Parts Used:
Richard from Coon Rapids, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
December 5, 2017
The six inch burner will suddenly change to a high setting even though the switch indicates low. Is this an element problem or a switch. Not sure what controls the temp setting!
For model number JBP90GV1
Hi George, Thank you for the question. This would be a issue with the switch that controls the element. The switch will need to be replaced. Good luck with the repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
February 28, 2023
Is part ps243905 the left front element 6" 1500w for my range
For model number JBP65MK4BS
Hello Robert, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS243905 for the Left Front Burner. We are happy to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pedro
June 14, 2023
Can I replace my existing burner(WB30T10047) with a WB30T10129?
Thank you
For model number JBP66CK1CC GE RANGE
Hi Pedro, thank you for the question. Based on our research, the part number you provided is not compatible with your model, so it is not recommended to replace your existing burner, part number PS243905, with this one. We hope this information is useful!
Was this helpful?
Thank you for voting!
John
September 8, 2021
Will part number wb30t10047 replace my left front burner
For model number Jbp67boh1wh
Hello John, thank you for your question. We have researched the model you have provided, and the part number PS243905 is the correct part for your left front burner. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
