GE/GE_Thumb/00010095i03.gif
See part 132 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.ca

Single Heating Element Support Clip

★★★★★
★★★★★
2 Reviews
$10.28   Special Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS243701
Manufacturer Part Number WB2X9719
Manufactured by GE
Product Description

Single Heating Element Support Clip Specifications

This metallic clip is used to help support the broil element. Sold individually.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
Kenmore, General Electric, Hotpoint, Roper.
Part# WB2X9719 replaces these:
AP2014510, 251560, 285840, 324808, 334565, 339593, 4334357, 4337249, 4338587, 8004768, WB02X9438, WB02X9576, WB02X9719, WB2X9438, WB2X9576
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Part Videos

Replacing your Kenmore Range Single Heating Element Support Clip

Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 15 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
broiling element had burned through, req. its replacement
First I removed the two screws that hold the element in place. I also removed a screw that held one end of a support bracket. I then pulled the element out about 3 inches and disconnected the two wires. Reversing these steps, I finished the element's replacement.

I had noticed that the former element was sagging at the front end. I installed the additional clips (not original) on each forward end of the element for additional support.
  • Paul from Canton, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Socket set
  • Parts Used:
    WB44X173, WB2X9719
44 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element bad
Inside oven, remove two screws that hold element to back wall, pull element out three or so inches to get to wire clip connections, unclip wires, remove bad element, put new element in in reverse order of taking out bad element, just that simple. Also this site was so easy to use, plus the shipping time was unbelieveably short, even a company service man couldn't have been that quick, or as reasonable. Thanks a bunch!!
  • Stanley from Sulphur, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
  • Parts Used:
    8009, WB44K5012, WB2X9719
13 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element dangling
Snapped in the clip
  • Victor from Miami Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WB2X9719
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The upper element for broiling went kaput!
The two dollar socket set from Xmas 20 years ago had the right size socket..

Long arms are advisable.

The lower element still plugged in while the upper wires were just hanging there surrounded with fluffy white insulation fuzz, I wondered, " Could I bake a potato for my yearning and hungry family?"

When I explained the situation to my retired father in Arizona he said simply, "I wouldn't."

The new element popped in. It got really red, and, kinda like watching my toaster toast, the show was pretty much over after it heated up.

Shalom and Merry Christmas Folks!
  • Gerald from Redondo Beach, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
  • Parts Used:
    WB44K5009, WB2X9719
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer old and worn out
Dryer started making noises years ago. Finally it was intermittently starting, then...didn't start at all. It made a buzzing noise, like the motor was in over-torque. Then it over heated and wouldn't do anything until it cooled down. Then the cycle started all over again. I thought it best to change out all the worn parts. Found the belt, the rear seal, the rollers and motor all needed to be replaced. All were very simple to do. Followed the instructions and videos from others located on this site.
  • Harald from Port Washington, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
  • Parts Used:
    349241T, 341241, 279408, WB2X9719
8 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Single Heating Element Support Clip was needed to hold up the heating element in the oven. Old single heating element support clip broke and came out of the hole.
Simply inserted the clip into the hole in the oven. It took less than 20 seconds. :D
  • Marion from METHUEN, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WB2X9719
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old single heating element support clips came loose over time.
I ordered the replacement clips from this site and they arrived in a timely manner. The clips were perfect, but due to the age of the oven, the holes had elongated and the new clips kept falling out also. I modified the clips by widening the tips with a pair of pliers. They are holding just fine. I don't think the older clips could've withstood the modification.
  • David from SALISBURY, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
  • Parts Used:
    WB2X9719
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element clap broke off
All I had to do was pop the clamp on the top part of the heating element and push the clamp into the hole.
  • James from Hedgesville, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WB2X9719
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler element would not work.
Removed the old element: removed clips holding the element, unscrewed the 2 screws that hold element in place. On the back of the range, removed casing to get to the connection wires, disconnected the element then removed the element. Reversed procedure to replace. Thanks for the speedy ordering and delivery.
  • ANNE from FT. LAUDERDALE, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
  • Parts Used:
    WB44X232, WB2X9719
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusted burn box
I simply removed drop in range and removed screws holding burn box and installed new box. Total time was approxmately !hr.
  • Joseph N from Hazletownship, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
  • Parts Used:
    WB64K5051, WB2X9719
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS243701
      Manufacturer Part Number: WB2X9719
      Brand
      Model Number
      Description
      Kenmore
      1034688610
      Range
      Kenmore
      1036208511
      Range
      Kenmore
      1036268412
      Range
      Kenmore
      1036348412
      Range
      Kenmore
      1036408412
      Range
      Kenmore
      1036408413
      Range
      Kenmore
      1036408710
      Range
      Kenmore
      1036417610
      Range
      Kenmore
      1036417611
      Range
      Kenmore
      1036417612
      Range
      Kenmore
      1036427510
      Range
      Kenmore
      1036427540
      Range
      Kenmore
      1036427560
      Range
      Kenmore
      1036427610
      Range
      Kenmore
      1036427611
      Range
      Kenmore
      1036427612
      Range
      Kenmore
      1036428412
      Range
      Kenmore
      1036428413
      Range
      Kenmore
      1036437710
      Range
      Kenmore
      1036447710
      Range
      Kenmore
      1038357210
      Range
      Kenmore
      1038357211
      Range
      Kenmore
      1038357212
      Range
      Kenmore
      1038357220
      Range
      Kenmore
      1038357221
      Range
      Kenmore
      1038357222
      Range
      Kenmore
      1038357240
      Range
      Kenmore
      1038357241
      Range
      Kenmore
      1038357242
      Range
      Kenmore
      1038357260
      Range

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service