Drawer Glider

I removed the old part and installed the new one - time taken about 5 minutes.

On another stove two knobs were broken. Time to replace . One minute.

This is a great company to deal with. Parts came in less than 24 hours. WEre the correct parts and were lower priced than other places. I was able to repair 2 stoves with one low shipping charge

Remove the draw from the stove. Then unscrew two Phillips Head screws ( one on each side). Remove the old gliders. Slip in the new gliders. Screw the two phillis head screws back in. Make sure when you put the drawer back in the stove that you lift the front of the drawer up enough that the lower portion of the new glider is engaged on the side rail of the oven drawer space.

Installation was super simple. Follow instructions that are on the site already. Very easy.

Nylon support is attached to the oven frame with a screw having a .25 inch socket head. The screw is mounted in a recessed opening on the support, so a socket is needed. I needed to purchase a proper size socket from the hardware store for a few dollars since the smallest one I had was 7mm. I guessed at the size and was correct. Repair was easy and took a few minutes.