See part 104 in the diagram
( Grid squares measure 1x1 inch )
Hood Thermostat
$50.65
Special Order
Special Order
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS239318
Manufacturer Part Number WB27X10194
Manufactured by
GE
Troubleshooting
This part fixes the following symptoms:
Won’t turn on | No heat
This part works with the following products:
Microwave.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB27X10194 replaces these:
AP2026102, 769936, WB27X10168
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pete
November 19, 2018
My microwave runs but does not heat i tested fuses and thermo cut outs but i believe this part on diagram does not test out in machine being off. When i was reading description it said that this closes with to much heat so this part should not have continuity when machine is off, i was in understanding that these parts always should have continuity> thank you
For model number jvm1870sf02
Hello Pete, Thank you for the question.Yes, the parts should always have continuity. No continuity indicates the part is defective. Hope this helps, good luck with this repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Bryan Lee
November 8, 2017
The unit is not heating right. It is set to higest level 10 its just barely warmingl
For model number JVM1440WD001
Hi Bryan,
Thank you for your question. There are a couple of parts that you may want to check to see if they are working correctly. I would suggest testing your thermostat, your diode, and your hood thermostat as well. Those would be the most likely culprits. If they are all testing fine you may have to take a look at replacing your magnetron. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Don
March 14, 2022
Should the hood thermostat always have continuity?
This is a GE model.
For model number jvm 1870cf03
Hello Don, Thank you for your inquiry. At room temperature, this thermostat should have a multimeter reading of zero or close to it. If it is not at room temperature, the reading should be infinity. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
ROBERT
September 24, 2021
MICROWAVE HAS ERROR CODE F5 AND BEEPS. WILL REPLCING THE WB27X10194 THERMOSTAT SOLVE THIS PROBLEM?
For model number RVM1535DM2WW
Hello Robert, thank you for writing. The F5 error code indicates that you have an internal damper switch error. That type of internal component failure will need to be diagnosed and repaired by a service technician. Good luck with your repair.
Was this helpful?
Thank you for voting!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS239318
Manufacturer Part Number: WB27X10194
Manufacturer Part Number: WB27X10194
Brand
Model Number
Description