Product Description
Light Bulb - 40W Specifications
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and should be replaced. The bulb attaches directly to an appropriate light socket and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair. This light bulb measures about 1 1/8 inches. We do not recommend using a higher-wattage bulb for this appliance, and can only recommend this specific bulb. If fixing the bulb does not solve your microwave light issue, it's possibly a problem with the socket, which means the socket and/or board will need to be replaced. This can be a more dangerous repair, so consult your user manual or a technician before attempting.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Microwave Light Bulb - 40W
Troubleshooting
This part works with the following products:
Microwave, Microwave Oven Combo, Range Hood, Washer.
This part works with the following products:
Whirlpool, Maytag, Amana, KitchenAid.
Part# 8206232A replaces these:
AP4512653, 1890433, 0053422, 0053437, 05200136, 05200137, 14209237, 14210453, 14210811, 14218311, 14218312, 14218318, 2635-0004, 2635-0005, 2665-0003, 4158344, 4158365, 4158432, 4164062, 4166665
...
Show more
, 4174608, 4338831, 4359625, 4393681, 53001372, 53437, 56001071, 56001089, 57001073, 7-47000, 7-47001, 747000, 747001, 8183993, 8189961, 8204855, 8205422, 8205586, 8206232, 8206443, R0712011, R0712013, R0712014, R0712015, R0712016, R0713503, R9800403, R9900310, W10321375, W10598935, W11521888, Y0053422, Y0053437, Y05200136, Y05200137, Y747000, Y747001
Show less
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Karen L - March 22, 2024
Verified Purchase
Right Lightbulb for the Job
Correct lightbulb. I'm happy except for the shipping charge
Erin M - October 6, 2023
Verified Purchase
Fast
The light bulb came quickly and was easy to install.
Ginette G - September 14, 2023
Verified Purchase
Excellent product!
I had bought a replacement light at a local hardware store. Itqas not bright enough and burnt within a week. The one I ordered on this site is nice and bright and still working after several weeks. I recommend this company for hard to find parts.
James T - April 26, 2023
Verified Purchase
Easy repair.
The part was what I ordered and appliance works fine again.
CLEO C - September 4, 2022
Verified Purchase
easy replacement
parts arrived quickly and intact, good service
Roland C - December 15, 2021
Verified Purchase
Easy repair and the video was a great help!
Very impressed with the amount and quality of the inventory. Your super speed of the shipping and the well laid out website.
Vivienne A - December 10, 2021
Verified Purchase
All ok
Bulb for my microwave. No surprises.
Bernie C - September 28, 2021
Verified Purchase
Exact light
Easy
Karen H - August 13, 2021
Verified Purchase
Easy
The website made it easy to find and order the correct part, and it arrived quickly. Should not have wasted my time trying (and failing) to find the right bulb at the hardware store!
Aron P - June 17, 2021
Verified Purchase
Microwave bulb
Ordered two bulbs to take advantage of shipping… Both came quickly in great shape very well packaged… Thank you
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 29 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burned out light under microwave and Filters needed changing
I just removed the multiple screws which held the hood cover on. I then attempted to remove the light bulbs from the socket. This proved impossible because the bulbs were so fragile from the heat and grease build up. To make this task much easier and probably safer, just replace the bulb housing and light bulb. The bulb housing unplugs very easily. Just replace it then screw your new bulb in. P.S. Be sure to unplug appliance before you start.
The filters are very easy to replace. No tools needed.
Hope this helps.
The filters are very easy to replace. No tools needed.
Hope this helps.
Other Parts Used:
-
Chris from Cedar Hill, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
224 of 336 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light bult needed to be replaced
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Other Parts Used:
-
Deborah from Millersville, MD
-
Difficulty Level:Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
207 of 303 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb "burnt out"
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Other Parts Used:
-
Joseph from Pembroke, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
93 of 146 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out bulbs and grimey filters
FIrst I removed the glass bulb cover, old bulbs, and old filters. Then I removed the 6 screws that held the lower cover in place, and bulb sockets. Then washed all parts an reassembled with new bulbs and filters.
Other Parts Used:
-
DAVID from SAINT PAUL, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
85 of 165 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light bulb burned out
when removing the bulb the base broke off and there was an ark took place as I had made a mistake and didn't unplug the unit before working on it , thought with the light switch off it was ok, but still had power in that area . So ALWAYS uplug before making repairs.
The whole unit was dead and I checked for power at the plug and it was live. after unpluging I took the main control panel off and discovered a fuse was blown and replaced it along with a new socket and bulb and now it works like new . the fuses are inside small plastic capsuals so I back probed them with continuity light to find the blown fuse .
It was quite simple once I found how to get the panels off. Just basic common sence will take care of most appliance problems
thanks
Louie Scholl
The whole unit was dead and I checked for power at the plug and it was live. after unpluging I took the main control panel off and discovered a fuse was blown and replaced it along with a new socket and bulb and now it works like new . the fuses are inside small plastic capsuals so I back probed them with continuity light to find the blown fuse .
It was quite simple once I found how to get the panels off. Just basic common sence will take care of most appliance problems
thanks
Louie Scholl
Other Parts Used:
-
Louis from mancelona, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
58 of 73 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burned out bulb
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again.
Other Parts Used:
-
john from plainfield, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
26 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light bulb burned out and socket shorted out
Unplugged the microwave to de-energize the unit. Removed 1 screw and the shroud on the range hood light; removed the light bulb. Removed 4 screws from each side and the front of the metal plate on the underside of the unit. Carefully lowered the plate to expose the light socket. Noted which wire was connected to each terminal (they are color-coded), then released the spring clip connectors from the terminals. Removed the 1 screw holding the socket in place then reversed the procedure to install the replacement parts.
Other Parts Used:
-
Michael from WILLOW GROVE, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
25 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out light bulbs in microwave hood stove
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold the glass plate in position and left it at that.
Other Parts Used:
-
Herbert from Norton, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
23 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
blown dual element lightbulb
The hard part was trying to find the light bulb locally. The locally sold light bulbs were either too long, not dual element or not powerful enough. So I ordered the light bulb straight from PartSelect. When it came time to install the new light bulb I carefully removed the screw holding the plate in position so as not to loose it in my gas stove. I needed the mirror to line up the light bulb and screw it in. Once it was in I verified operation and closed up the plate being careful not to drop the screw into my gas stove. Problem solved.
Other Parts Used:
-
Glenn from BRISTOW, VA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench set
18 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change broken 40W light bulb on Over-the-range Microwave
The original bulb came apart while unscrewing it from the back of the microwave, leaving the metal screw thread contact still in the socket. Since this is an over-the-range micriwave there isn't enough room to manuever needle nose pliers into the socket to remove the screw thread contact. So this is how we were able to remove it.
Unplug power cord.
Take a standard wine bottle cork and whittle down one end until it fits in the socket. Then, using a bit of pressure push the cork into the socket snd begin unscrewing the screw thread contact until it comes out of the socket. Works like a charm!
Unplug power cord.
Take a standard wine bottle cork and whittle down one end until it fits in the socket. Then, using a bit of pressure push the cork into the socket snd begin unscrewing the screw thread contact until it comes out of the socket. Works like a charm!
Other Parts Used:
-
Rosanne from BRIDGEVILLE, DE
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
13 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carla
September 26, 2017
Does this bulb have the three positions?
For model number 8206232A
Hi Carla, Thank you for the question. Yes this bulb is used for the 3 different light settings that are determined buy the control board option. Hope this helps!
106 people found this helpful.
Was this helpful?
Thank you for voting!
John
October 6, 2017
The exterior light bub just fell out when i removed the cover. Only the glass part of the bulb came out. I assume the stem is still in the appliance. Have tried to get it out without removing entire microwave from the wall. Any suggestions
For model number WMH31017AW-0
Hi John,
Thank you for your inquiry. I have found a video on our website that may help you with this. You will find it under part number PS1156014. I hope this helps. Thank you and have a great day!
39 people found this helpful.
Was this helpful?
Thank you for voting!
Daniel
January 8, 2019
The exterior light didn't turn, so i bought a new light bulb, but now the problem with it is that i install the bulb it automatically turns on and stay on in all positions of the light switch it doesn't turn off. I can see the switch changes positions when pushed on the display, but the light keeps on
For model number WMH31017FS0
Hello Daniel, thank you for your question. If the light stays on, and doesn't turn off in any capacity the issue is probably with the electronic control Part Number: PS11765762. You can test the socket to be sure that isn't the issue, but most likely the board itself, which contains the light switch options, needs to be replaced. I hope this helps.
38 people found this helpful.
Was this helpful?
Thank you for voting!
Christine
November 13, 2017
I'm trying to remove the stem from the underside of my over the stove microwave. The glass bulb broke off, leaving the metal stem in place.
Hi Christine, Thank you for the question.First unplug the appliance. There are a few tricks you can try. One way is to use an empty soda bottle. Remove the cap from the bottle and melt the threaded top a bit and screw it into the socket where the broken off stem is. The melted threads should catch the stem and allow you to unscrewed from the socket. You can also use a pair of pliers, insert the pliers into the socket and open them up so the points are firm against the sides of the stem. Next turn the pliers so they unscrew the stem from the socket.Hope this helps!
21 people found this helpful.
Was this helpful?
Thank you for voting!
Craig
April 18, 2018
The exterior bulb has burned out. Is it possible to replace it with a dimmable led bulb instead? The halogen bulb gets too hot and isn't bright enough.
For model number vmh31017fb-0
Hello Craig, thank you for your question. Unfortunately, the only bulb that is recommend and available for that unit is Light Bulb - 40W Part Number: 8206232A. This is a 40W bulb, and unless your unit has an option for different settings like hi, low, there is no way to add a dimmer bulb to the unit as the control functions wouldn't allow for that type of bulb. I hope this information helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Carolyn
November 15, 2017
Got the bulb out after it broke off. New one is too long. Are there 2 sizes of 40 watt bulbs?
For model number MMV5208WW1
Hi Carolyn,
Thank you for your question. For the underside of your microwave there is only 1 size of bulb. According to your model information. This should be the correct bulb for the underside of your microwave. Good luck with your repair.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Em
November 25, 2017
Light bulb for the hood microwave combo, the light bulb broke, hanging but still attached but can’t get it out and the screw part still in the receptacle. How get it all out? Thanks!
Hi Em, Thank you for the question.First unplug the appliance. There are a few tricks you can try. One way is to use an empty soda bottle. Remove the cap from the bottle and melt the threaded top a bit and screw it into the socket where the broken off stem is. The melted threads should catch the stem and allow you to unscrewed from the socket. You can also use a pair of pliers, insert the pliers into the socket and open them up so the points are firm against the sides of the stem. Next turn the pliers so they unscrew the stem from the socket.Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Bobbie
January 5, 2018
Want to replace 40 watt bulb with led, will the e17 4w 40 watts bulb work?
For model number KMHS120ESS1
Hello Bobbie, Thank you for your inquiry. This is the light bulb for your model that goes at the bottom of the microwave. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
January 17, 2018
Is the base for this bulb a medium base, or a small base, and the dimensions 2.250" long and 1.00" wide?
For model number MMV4205FZ - 3
Hi Rick,Thank you for your question.This exterior light bulb for your microwave is 40W and has a small screw-in base. I hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Paris
January 18, 2019
Hello, when i removed the cooktop bulb, only the bulb came out. In the process of removing the threaded metal part with needlenose pliers (dumb move in hindsight), there was a loud pop and now the microwave doesn't work at all. I'm assuming it's the main microwave fuse that needs to be replaced. Is that a logical conclusion, and if yes, do you sell that fuse? Thanks so much for your help.
For model number Whirlpool WMH5320CS-5
Hello Paris, thank you for your question. Yes, the most likely issue is the fuse, part number W10138793. If this part blows you will not have any power to the unit. When it blows you usually hear a pop noise as well. I hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2376034
Manufacturer Part Number: 8206232A
Manufacturer Part Number: 8206232A
Brand
Model Number
Description