GE/GE_Thumb/00123831i01.gif
See part 19 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Knob, Gray

★★★★★
★★★★★
1 Review
$14.49   Special Order

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2370714
Manufacturer Part Number WH01X10462
Manufactured by GE
Product Description

Knob, Gray Specifications

This knob for your dryer accepts a D-shaped shaft.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Timer will not advance | Will Not Start | Will not shut off | Shuts off too soon
This part works with the following products:
Dryer, Washer.
This part works with the following products:
General Electric.
Part# WH01X10462 replaces these:
AP4485269, 1550693, WH01X10309
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

16 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
October 11, 2017
What color is knob wh01x10462 I need white. I don't want to assume the wh means white
Hi Mike,Thank you for the question. This knob is Grey in Color. The White knob is PartSelect Number PS9493075. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
September 13, 2017
Need the timer knob. The timer knob accepts a d shape time shaft and has a metal clip inside. I do not need selector knob which is slightly different with no clip.
For model number DRSR483GG7WW
Hi Robert, Thank you for your inquiry. The part number for the timer knob for your appliance is PS2370714. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Dale
December 12, 2017
Knob will not turn shaft. Can take knob off and use pliers to turn shaft to make it work.So should knob repair my problem?
For model number DWSR463EG2WW
Hi Dale, Thank you for the question. If the shaft can be turned manually, the knob will need to be replaced. Good luck with the repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Anthony
November 27, 2017
Does this knob include the d-clip? Thanks!
For model number DWXR463EG6WW
Hi Anthony, Thank you for your question. The knob should already include the d-clip. If you find you do need it, the part number for it is PS267091. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jan
December 6, 2017
Need the correct dryer knob for this model.
For model number GTDP490GD2WS
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS8769914. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Rodney
January 30, 2018
This part suggested ( ps2370714) is not the timer control knob I need - it is heat and signal knob? please tell me the timer control knob part number. thanks.
For model number GTDP300EM1WS
Hello Rodney, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS3487132. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mari Anne
April 23, 2018
I need dryer knobs for this dryer. What knob do i need??? thanks
For model number GTDP490GD0WS
Hello Mari Anne, thank you for your question. The knob for your appliance is part number WE01X20380. This knob works for all spots on the unit. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Terri
May 7, 2018
Need to replace timer knob. Which part number do I use for model number gtdp301glows? Thanks.
For model number GTDP301GL0WS
Hello Terri, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS3487132. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Christine
August 23, 2021
As I turn the fabric selection and timer grey knob, it does not 'click'/offer resistance in the entire wheel, just in a few areas. When I used the dryer in the cotton setting, it didn't stop and went into the permanent press area. If I put it on 10 minute fluff, it doesn't start. Is it just the knob or something inside the dryer?
For model number DWXR463GG1WW
Hello Christine, Thank you for the question. Normally this is an indication the Timer Switch is defective and will need to be replaced. The Switch is the part that holds the stem the knob slips onto. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Cheryl
September 21, 2021
Hello, I need to replace the timer Knob on my dryer. I understand that the part may no longer be available. Can you recommend a compatible part? Thank you
For model number PWXR473ET5WB
Hi Cheryl, Thank you for your question. Where the timer knob listed for your model, part number WE1X1265, has been discontinued by GE, you will need to contact them to see if they have information on a replacement. If they provide you with a part number for a replacement timer knob, you may call us back with it and we will verify if we have it available for you. If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 17 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Frozen timer
1. Remove three screws from back of dryer
2. Tilt top panel forward and disengage
3. Swapped wiring one by one from old timer to new timer
4. Reinstall

The new timer worked so well that even the old, broken knobs could turn it. But I replaced the knobs anyway.

Customer service was great in helping me verify that this timer would work on this dryer (my model number was not listed on the website).
Other Parts Used:
Dryer Timer
  • Bruce from South San Francisco, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
108 of 124 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer timer operation was restricted causing multiple broken (plastic) knobs.
Turned off the electrical breaker to the dryer.
Removed the three screws holding the control panel. Removed the old knob. Tilted the control panel forward to expose the wiring and controls. Removed the screw holding the old timer and loosened the timer - leaving the wires hooked up. Then I removed one wire at a time and reconnected to the corresponding terminal on the new timer until all of the wires were connected to the new timer. Replaced the timer and re-assembled the control panel on the dryer - turned the electric breaker back on.
Other Parts Used:
Timer
  • Gary from Brooklyn, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
77 of 92 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer Would Not Turn - Broke Knobs
The hardest part of this repair was determining which parts to buy. The PartSelect website did not list this particular model dryer. But the GE site did. I confirmed that the G2WW and the G3WW models used the same parts on the GE site and then purchased them at the PartSelect site. I saved almost 20% and the parts arrived the next day. The actual repair job was easier than I thought. Replace wire for wire, take the old timer off and snap the new one in place. Works perfectly.
Other Parts Used:
Timer
  • Richard from Palmetto Bay, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
25 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Could not adjust timer/switch
I had immediately assumed the problem was the timer/switch, P/N WE4M365 and foolishly ordered that part. Should you ever encounter non-adjustment of the timer/switch, try another knob from the console. That was the only problem here as it turns out. Also, the knob DOES come with the "D" shaped insert clip.
Other Parts Used:
D-Shaped Knob Insert Clip
  • Charles F from Kirkville, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
21 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer bound up, causing the knob to break.
Disassembled back splash to inspect timer. Ordered parts (at a 50% discount from brick and mortar stores). Parts delivered in two days. Installed new timer and had everything back together in 10 minutes. No-brainer!
Other Parts Used:
Timer D-Shaped Knob Insert Clip
  • Thomas from Webster, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
20 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The timer dial had cracked, and needed to be replaced
We had been using a pliers to turn the timer dial for way too long. We finally went online to find the replacement dial. Ordered it, received it in 2-3 days, opened the plastic bag, and voila! put it on and now get to use the dryer the way it was intended!!
Other Parts Used:
  • Joanne from Horseheads, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
15 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken knob
Placed new knob over existing stem
Other Parts Used:
  • Marcus from Waukee, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
inside assembly on knob broke
Could not turn dryer selection without a pliers. Metal assembly inside knob broke. Easy enough to find knob on website, though the machine was so old the model numbers had changed. Popped off old knob, put new one on; done. Received knob in mail within a couple of days of ordering online. Excellent service. Thank you.
Other Parts Used:
  • Christine from Darien, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
12 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob broken
Pushed new one on shaft
Other Parts Used:
  • William J from CUMMING, GA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The knob is worn out
Just remove 3 screws at the back and tilt the panel forward and you got access to the timer control and match the corresponding letters to the wires and that's it done.
Other Parts Used:
Timer
  • Jaime from CHESAPEAKE, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
3.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS2370714
      Manufacturer Part Number: WH01X10462
      Brand
      Model Number
      Description
      General Electric
      DLLSR40EG0WW
      Dryer - Electric
      General Electric
      DLLSR40EG1WW
      Dryer - Electric
      General Electric
      DLLSR40EG2WW
      Dryer - Electric
      General Electric
      DLLSR40EG3WW
      Dryer
      General Electric
      DLLSR40EG4WW
      Dryer
      General Electric
      DLLSR40EG5WW
      Dryer
      General Electric
      DLLSR40EG6WW
      Dryer
      General Electric
      DLLSR40GG0WW
      Dryer - Gas
      General Electric
      DLLSR40GG1WW
      Dryer - Gas
      General Electric
      DLLSR40GG2WW
      Dryer - Gas
      General Electric
      DLLSR40GG3WW
      Dryer
      General Electric
      DLLSR40GG4WW
      Dryer
      General Electric
      DLLSR40GG5WW
      Dryer
      General Electric
      DLLSR40GG6WW
      Dryer
      General Electric
      DLLSR40GG7WW
      Dryer
      General Electric
      DQSR483EG0WW
      Dryer - Electric
      General Electric
      DQSR483GG0WW
      Dryer - Gas
      General Electric
      DRSR483EG0WW
      Dryer - Electric
      General Electric
      DRSR483EG1WW
      Dryer - Electric
      General Electric
      DRSR483EG2WW
      Dryer - Electric
      General Electric
      DRSR483EG3WW
      Dryer
      General Electric
      DRSR483EG4WW
      Dryer
      General Electric
      DRSR483EG5WW
      Dryer
      General Electric
      DRSR483EG6WW
      Dryer
      General Electric
      DRSR483EG7WW
      Dryer
      General Electric
      DRSR483GG0WW
      Dryer - Gas
      General Electric
      DRSR483GG1WW
      Dryer - Gas
      General Electric
      DRSR483GG2WW
      Dryer - Gas
      General Electric
      DRSR483GG3WW
      Dryer
      General Electric
      DRSR483GG4WW
      Dryer

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service