Range Surface Element Control Switch - 6 Inch - 1560 W Specifications
This switch controls the small burner on a range/stove top.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Range Range Surface Element Control Switch - 6 Inch - 1560 W
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB24T10029 replaces these:
AP2024076, 769696
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.3
Filter By Rating:
5 Stars
6
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
1
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Harry S - May 1, 2022
Verified Purchase
The part works fine but the element cuts in and out more,something we have to get use to.
The part arrived on the scheduled day,in excellent condition.I installed it myself because i’m a retired electrician. Thank You.
★★★★★
★★★★★
Hugh F - January 28, 2023
Verified Purchase
Just what we needed. It was a reasonable price. All happy.
The part was exactly what we needed. It was easy to repair, and was the perfect fit.
★★★★★
★★★★★
Wayne K - April 5, 2023
Verified Purchase
very professional
great service all worked out well right parts
★★★★★
★★★★★
George G - February 7, 2024
Verified Purchase
Repair completed
I received the part without delay along with instructions to replace the old one. I will be using your parts service again in the future if the parts I require sold through your business.
★★★★★
★★★★★
George & Kathy S - September 25, 2018
Verified Purchase
Easy repair
Delivery was fast, part was exactly what we order and was easy to replace on our GE stove.
★★★★★
★★★★★
George S - September 12, 2019
Verified Purchase
Burner part order, used twenty-four seven for my tea
Fast delivery, exactly the right part, and very easy to install. Totally satisfied with the service.
★★★★★
★★★★★
Wayne K - May 1, 2024
Verified Purchase
very professional
A-1
★★★★★
★★★★★
ARSENE J - August 24, 2021
Verified Purchase
GE Switch control.
The part came fast my stove is working Thanks.
★★★★★
★★★★★
Ron S - January 3, 2024
Verified Purchase
easy repair for defective switch with slight adjustment. Much cheaper than calling repair service.
Part was correct except needed to be rotated 90 degrees to align on/off position. No problem as all mounting holes were available.
★★★★★
★★★★★
Piero A - July 27, 2018
Verified Purchase
Wrong part..I have had to go to my local repair shop and get them to order it..
Looks fine. But the wrong part is shown in the schematic.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 19 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The switches failed on both front burners.
Remove nobs from both switches. Pull out the range (the hardest part). REMOVE THE POWER PLUG FROM THE WALL Remove 7 screws with nut driver and take off upper back panel. Remove 2 phillips screws from front, they hold the switch brackets. The new switches don't fit in the bracket so discard the bracket keeping the screws. Removing 1 wire at a time from the old switch transfer to the new noting the letter/number ie "H1 P1" combos they are all there just not in the same places on the new switch. When wiring is complete, using the bracket ,screws from the front screw on the switches. Replace the back panel with 7 screws. In my case the old nobs did not fit the shafts of the new switches. I found some at the local hardware store. I bought 4 for $0.29 each! I expect to be replacing the other burner switches shortly.
switch went to high setting no matter what the setting was
took off cover, pulled all wires off switch, pushed wires on new switch, put cover back on. Whalaa..
Other Parts Used:
Frank from Glen Cove, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
10 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace stove top burners (3 total)
Unplug stove first. Raised the stove top and propped up useing wooden spoon and wife assistance holding up. Pay attention to spot brackets hand to top. Removed sheet metal screws from bracket clamp holding burner in place. Removed one extension bracket from old burner and transfeered to new burner. Removeing one bracket clamp allows the other one to act like a hinge and make for easy removal and replacement. Back of burner had corresponding numbers which made it easy to replace brackets in same place as old. I carefully take one electrical wire at a time from old burner and transfeered to the new burner. Replaced burner same way it came off.
Other Parts Used:
Thomas from Bonifay, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
back burner not getting hot
unplug stove first...take back of stove off to get to burner switch remove wires colors coded.. get new switch put wires on the same way.plug stove in test burner...very simple to replace.and save $$$$$$$$
Other Parts Used:
William from Shenandoah, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The back burner was not providing constant temperature...turn it warmer and it got too hot...turn it down and it would be cold.
I viewed the video available through part-select. The most important thing I learned to do was to change one wire at a time instead of removing the old switch completely and then installing the new one. With 5 wires involved, it was really simple to install and not have to remember which wire went where. I was surprised how easy it was and it works wonderfully!
After receiving the new swith from part select in less than four days with surface mail as they promised, it took me less than five minutes to replace the new swith with the old one. The only tools that I needed were A) a 5/16 nut driver to remove the back panel in order to get an access to the swith.B) a phillips screw driver to remove the swith assembley from the front panel.
I had an estimate from a technician to do the job for 196.27 dollars!!!!!:(:(. I only paid 29.56 Dollars to part select to get this swith, including the shipping.:):):)
Other Parts Used:
abbas from redmond, WA
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven shut down due to overtemperature (code F2). Also, one surface element had erratic control.
Putting the faceplate graphics onto the oven control is tricky. Use the tabs on the bottom and one side of the control unit to line up the faceplate. Be careful because once the faceplate sticks it sticks. That was the hardest part of the repair process. Installing the oven control unit and the surface control unit was straight forward.
Pulled stove out and unplugged. At the rear of the range there were 4 faster. Used a nutdriver piece in an electric drill. Pulled off the cover and located the switch. At the front of the stove, I removed the knob and unscrewed two screws releasing the switch. I undid and replaced each wire connector one-by-one to avoid any wrong connections. Replaced and secured the switch and replace the back panel. All secured, power on and fixed! Easy repair, but something that had been put off for a year! Also follow the installation videos from PartSelect - very helpful!
Other Parts Used:
Charles from PORTLAND, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner not work
Fue muy facil desconectar primero la estufa despues quite los tornillos de la parte superior detras de la estufa, desconecte un cable del switch y lo conecte en el nuevo despues el siguiente hasta conectar todos los cables en el nuevo switch. Lo mejor es desconectar uno por uno para mo mesclar los cables , despues removi el switch de la estufa y puse el nuevo , puse las partes de regreso y listo conecte la estufa t revise si funcionava el quemador y listo sin ningun problema.
Other Parts Used:
SILVIA from Midlothian, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jacki
January 25, 2018
The 10" burners on my GE stove no longer "simmer." they're fine at full or half heat but below that, they remain too hot, making it impossible to simmer anything. I'm thinking i need to replace the burner control switch. Or do i need to replace the burner unit itself? Thanks to your wonderful video, i feel i can make the switch repair without calling a service person, if that's what i need.
For model number JBP35DM1BB
Hello Jacki, Thank you for your inquiry. We would recommend testing both the element and switch with a multimeter to see if they have continuity. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. If both show continuity, I would check the wiring. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Lazarus
February 23, 2018
My triple burner does not work and the hot surface light is constantly on. I believe the whole part number is GE wb30t10155 element haliant 12 triple, however it seems that only a limiter may need be replaced. Do you have it sold separately and if so what is a part number? Thank you.
For model number JB750EF2ES
Hi Lazarus, Thank you for the question. The Limiter is only sold as part of the element its self. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jake
January 3, 2019
So i have a glass cooktop that the right rear element stays on after turning the switch off, i would assume just replacing that switch would solve the problem but the strange thing is if i unplug the stove it resets the switch to off until used again
For model number JB700EJ1ES
Hello Jake, thank you for your question. Removing the power to the unit is allowing the switch to reset to off. Replacing the switch will fix the issue and allow the burner to be turned off when you're done using it without having to unplug the stove. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
David
October 3, 2019
When using the front left burner, i hear an arcing/crackling sound in the area of the burner's control dial. I suspect a bad connection in the control dial. Any thoughts?
For model number RB790DT2BB
Hello David, Thank you for the question. I suggest checking the wiring and if it is secure and not damaged, you may need to replace the switch. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
RONALD
February 4, 2020
The burner light stays on at all times, no burner on or oven on.
For model number JBP24DM1WW
Hello and thank you for writing.
A broken hot surface switch on one of the surface elements (also called burners) causes the Hot Surface light to stay on constantly. To find out which surface switch to replace, test each of the hot surface switches. We hope this helps. Please contact us anytime if you require further assistance.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jacki
January 25, 2018
Oops, i just sent an email referring to 1o" burner on my GE stove. I meant 8", obviously. Your site says the burner switch fixes the problem if the eye will not heat or start. Mine heat, but i can never reduce the heat to simmer. Perhaps it's the burner unit itself?
For model number JBP35DM1BB
Hello Jacki, Thank you for your inquiry. You can test both the switch and burner element with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 28, 2024
The large front right burner will only go to high or low I have no control of in between HEAT settings? Can you suggest a part to replace?
Thank You.
For model number JB750DJ3WW
Hi Paul, thank you for writing in. Our research has found, it is either the Element, part number PS2321564 or the Switch, part number PS11729102. We hope this helps.
None of the burners work. Indictor lites come and stove and boiler. What part need to be checked
For model number PCB905SV1SS
Hello Jeff, thank you for your inquiry. We would recommend testing both the burner elements and switches with a multimeter to see if they have continuity. Please contact us anytime if you require further assistance.
Could you please help me? My range will not heat up the burners or oven. The ciock, timer, and corresponding lights all work fine when knobs are turned. So far, i replaced the bake element and the control board, but still no heat. Any suggestions? Thank you
For model number JBP64BB4WH
Hi Daryl,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the sensor checks out okay, there are some other parts that you will need to check to see which ones are causing the issue. You will also need to check the bake and broil elements, surface burners, the burner switches, the electronic control board and the light switch. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Kim
November 1, 2022
I have a radiant cooktop and at this point, all the burners fluctuate in their heat consistency. They cannot be trusted to stay at the set temperature.
For model number JCBP630DT1WW
Hello Kim, thank you for contacting us. It looks like the control switches, part number PS236754, and part number PS236752, are problematic. These switches control the heat production of the surface elements. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to change the heat inten...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS236754
Manufacturer Part Number: WB24T10029
