Surface Burner Switch - 8 Inch - 2100W Specifications
This switch controls the large burner on a range/stove top.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Range Surface Burner Switch - 8 Inch - 2100W
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB24T10027 replaces these:
AP2024074, 769694
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
5 Stars
7
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert J - July 24, 2023
Verified Purchase
burner switch
the part was the same as the original, prompt delivery and easy to install. works perfectly as it should.. problem solved !
★★★★★
★★★★★
David M - November 21, 2019
Verified Purchase
Easy repair info
The info on how to do the repair was great.it was easy when you know how.
★★★★★
★★★★★
Sandy K - November 16, 2019
Verified Purchase
worked perfect
on time and was a snap to install worked perfectly happy cx thank you
★★★★★
★★★★★
Hugh F - October 12, 2022
Verified Purchase
Just what we needed. It was easy to repair and a reasonable price. All happy.
Our appliance is back in good working order. It was easy to do. We are very satisfied with the time that it took to arrive. My wife is so happy.
★★★★★
★★★★★
Brian F - March 6, 2024
Verified Purchase
Good Quality
The switch is probably better quality than the original, fast shipping , excellent service
★★★★★
★★★★★
William R - February 18, 2022
Verified Purchase
easy repair
tahnks part was perfect condition, able to install easily. thanks burner now working
★★★★★
★★★★★
Mark C - April 19, 2023
Verified Purchase
Perfect replacement
The service was great. Part is exactly what was needed. Delivery fast so equipment was back in service fast.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Switch and burner dead
Removed rear panel, disconnected wires, unscrewed switch X2 - installed new parts in reverse order. Note: Would have appreciated new mounting screws with replacement switch.
Unplug stove. Remove rear panel of stove with a nut driver or socket. Remove knob from switch and use small screwdriver to remove screws on front panel switch. Remove and replace each wire contact one at a time to ensure correct wiring configuration. Replace screws on front panel to secure switch. Plug stove in and check that it works properly. Replace rear panel and move stove back in place.
Other Parts Used:
Mark from CHANNELVIEW, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burner would not turn off and I or my wife would have to turn the breaker off.
I simply turned the power off and slide the stove forward to give myself room to get behind it and just unscrewed the cover behind the burner switchers and pulled the switch knob off then I removed the two small screws that hold the burner switch to the control panel and go to the back and pull the wires carefully and replace them on the new switch one by one and screw the new switch to the control panel and replace the back panel and done!
Other Parts Used:
Mark from WOOSTER, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top glass top burner wasn’t working
I first ordered the wrong part and had to call customer service. They handled the return and ordered the new piece beautifully!! The installation was really simple. Once I took out two screws holding the top down, I removed three clips holding the burner on then switched out the electrical leads. Put everything back and it worked perfectly!!
Other Parts Used:
Robert from PAWTUCKET, RI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David Mabe
September 6, 2017
Would a faulty burner switch cause the burner to overheat or not respond to the heat setting occasionally?
Hello David, thank you for contacting us. Yes, this would be the cause of a faulty switch. Good luck with the repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
February 11, 2018
Would a faulty burner switch ( wb24t10027) on the 8 inch burner keep the red indicator lamp on the console always on? I have replaced the burned out 8 inch burner coil with a new GE coil but the red indicator light is always lit.
For model number ABS300J1WW
Hi Paul,
Thank you for your question. If the red indicator light is still on, then the issue is with one of the burner switches and you will need to test each one with a multimeter to see which one is causing the issue. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jesse
July 31, 2018
I have a GE stove (first model number) that needs a burner control (part # wb24t10027). I happen to have a Kenmore (2nd model number) that i removed all the burner controls from and have them in a box. It appears the part number is wb3148952 for the burner control on that stove. Are these controls interchangeable? Thanks in advance for your time! Jesse
For model number rb526dp1ww and 665.95142300
Hello Jesse, Thank you for the question. The wb3148952 switch originated as a Whirlpool part and is not interchangeable to the GE appliance. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
October 7, 2019
Some times when we turn the switch to off the burner stay on
Hi Mike, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Elana
November 18, 2019
The dual surface unit stays on high no matter the setting. What part do i need to fix this?
For model number JBP67BH3WH
Hello Elana, thank you for your question. The infinite switch that controls that burner should be replaced. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
November 23, 2021
The burner will not work and has low voltage at the burner, then found ants inside the switch. Would this be what is the trouble?
For model number J BS550K4SS
Hello James, Thank you for your inquiry. You can test the switch with a multimeter to see if it has continuity. We hope this helps.
Was this helpful?
Thank you for voting!
Randy
December 21, 2022
switch for small burner
For model number jcb630sj1ss
Hi Randy, thank you for reaching out. The part you are looking for is part number PS11737261. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
the sticker on this range show 1500 and 2000 watts for the 6and 8 inch burners will 1560 and 2100 w switches be okay
For model number JCAP760SM1SS
Hello Wayne, thank you for reaching out. The range written on the stickers is just an approximation. According to our research, the switches compatible with your model number are the 6" surface element control switch, part number PS236754, and the 8" surface burner switch, part number PS236752. We hope this information helps!
Will replacing the 8" surface burner switch stop the ceiling light from blinking when using either 8" surface burner ?
For model number rb790wk3ww
Hello Clyde, Thank you for the question. I suggest checking the wiring for damage and make sure everything is plugged in securely. The switch does not control the light so it should not effect it but there might be an issue with the wiring. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Annette
January 21, 2019
The red indicator remains on. All burns are plugged in correctly. The burns woe but when off the light remains red. What part would we replace to have this work correctly
For model number RN525S1AD
Hello Annette, thank you for your question. The issue is probably the indicator light itself. If the switch is turning off the burner, and there is no longer heat coming from the top, the light (part number PS237433) has probably failed and will need to be replaced. Good luck with your repair!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS236752
Manufacturer Part Number: WB24T10027
