Frigidaire/Frigidaire_Thumb/1DEBLY89.gif
See part F20A in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Overlay - Black

★★★★★
★★★★★
1 Review
$59.45   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2364031
Manufacturer Part Number 316419821
Manufactured by Frigidaire
Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond
This part works with the following products:
Range.
This part works with the following products:
Frigidaire.
Part# 316419821 replaces these:
AP4433205
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

13 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patricia
September 23, 2019
Can't set the clock, show's a code SD
For model number LGEF3045KFE
Hi Patricia, thank you for your question. That code actually stands for Store Demo. What you have to do is unplug the appliance for about 45 seconds. Then when you plug it back in press and hold the Oven Cook Time button until the SD disappears. I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Ryan
February 26, 2018
Does this have the adhesive already on it.
Hi Ryan, Thank you for the question. The overlay is Peel and Stick with the adhesive backing already on it. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Bernie
December 19, 2019
Does oven electronic controller board ps9494055 normally correct code 11 and ore 12
For model number lgef3045kfk
Hello Bernie, thank you for your question. Yes, that would fix that error code. We would recommend replacing the overlay as well. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Alex
November 26, 2021
Error message F14. Continuous beeping
For model number LGEF3045KFB
Hello Alex, Thank you for the question. The F14 Error code indicates the user interface panel cable is missing or disconnected. We suggest checking the cables and wiring to make sure nothing is damaged or loose. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dawn
February 13, 2020
Oven has a mind of its own. Temperature keeps climbing way above what i've set it for and burns everything. Yesterday it was up to 550 (when i set it for 350) and then it started beeping with a f10 error code. Nothing cleared the code but unplugging the unit. What could be going on here?
For model number LGEF3045KFB
Hello Dawn, thank you for your question. F10 indicates that the control detects a runaway temperature in the oven. If the oven is overheating, this can be caused by a stuck relay or contact on the oven electronic control board. If this fault code appears when the oven is at room temperature, then the failure points to a failed oven temperature sensor probe circuit or a bad electronic oven control board. If you are able to unplug the range and access the oven temperature sensor, you can check the resistance of this component with a volt/ohm meter. At room temperature, most Frigidaire oven temperature sensor probes will measure about 1100 ohms at room temperature. If your probe measures 2500 ohms or higher, then a defective temperature sensor is causing this problem. If the sensor is okay, then I recommend reconnecting the sensor and checking the resistance through the wiring harness connection directly at the electronic oven control board (with the range still unplugged). The sensor is oven connected through violet wires on Frigidaire ranges. If the resistance is normal through the wires that plug into the control board, then it is likely that you will need to replace the control board. I hope this helps

Was this helpful?
Thank you for voting!
Doug
November 13, 2018
Can you use the old overlay on the new eoc
For model number LGEF3045KFK
Hello Doug, Thank you for the question. Yes, the old overlay will work on the new EOC. Hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
Curtis
February 1, 2019
My oven will not heat up , i changed out the coil did not work. So do i need 20a or 20
For model number lgef3045kfk
Hello Curtis, Thank you for the question. I woudl first suggest testing the oven sensor probe. PartSelect Number: PS11731755. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the sensor is good you will need to replace the Electronic Oven Control Board, PartSelect Number: PS9494055. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
Gigi
March 11, 2019
Do you need to clean adhesive off the control panel when replacing the oven control pad?Adhesive remains on the panel after peeling off the pad. thank you
Hello Gigi, Thank you for the question. Yes, I woudl suggest cleaning the old Adhesive off in order to reinstall it properly. Good luck with the repair!

Was this helpful?
Thank you for voting!
Steve
July 24, 2019
The new eoc has a ribbon cable coming from the front of the board to the back. The old overlay when removed from the old eoc has a ribbon cable to be connected to the back of the new eoc. Which overlay should i be using?
Hello Steve, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
Steve
July 25, 2019
The new eoc has a ribbon cable coming from the front of the board to the back. The old overlay when removed from the old eoc has a ribbon cable to be connected to the back of the new eoc. Which overlay should I be using?
For model number LGEF3045KFJ
Hello Steve, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2364031. Hope this helps!

Was this helpful?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2364031
Manufacturer Part Number: 316419821
Brand
Model Number
Description
Frigidaire
BGEF3044KFA
Range
Frigidaire
BGEF3044KFB
Range
Frigidaire
CGEF3034MFA
Range
Frigidaire
CGEF3034MFB
Range
Frigidaire
CGEF3034MFC
Range - ELECTRIC RANGE
Frigidaire
CGEF3034MFD
Range - ELECTRIC RANGE
Frigidaire
CGEF3034MFE
Range - ELECTRIC RANGE
Frigidaire
CGEF3039RFA
Range - ELECTRIC RANGE
Frigidaire
CGEF3039RFE
Range
Frigidaire
CGEF3040PFA
Range - ELECTRIC RANGE
Frigidaire
CGEF3040PFB
Range - ELECTRIC RANGE
Frigidaire
CGEF3055KBA
Range
Frigidaire
CGEF3055KBB
Range
Frigidaire
CGEF3055KBC
Range
Frigidaire
CGEF3055KBD
Range
Frigidaire
CGEF3055KFA
Range
Frigidaire
CGEF3055KFB
Range
Frigidaire
CGEF3055KFC
Range
Frigidaire
CGEF3055KFD
Range
Frigidaire
CGEF3055KFE
Range
Frigidaire
CGEF3055KFF
Range
Frigidaire
CGGF3054KBB
Range
Frigidaire
CGGF3054KBC
Range
Frigidaire
CGGF3054KBF
Range
Frigidaire
CGGF3054KBK
Range
Frigidaire
CGGF3054KFB
Range
Frigidaire
CGGF3054KFC
Range
Frigidaire
CGGF3054KFE
Range
Frigidaire
CGGF3054KFG
Range
Frigidaire
CGGF3054KFH
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service