This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert B - March 19, 2019
Verified Purchase
Straightforward repair once we got the right size.
Perfect fit. Easy to replace.
★★★★★
★★★★★
Patricia F - May 5, 2020
Verified Purchase
Quick service...but not so easy
Easy process for ordering and part received promptly.......however, the part did not fit despite the fact the correct model number was identified. This may be fault of manufacturer as the part was identified in Frigidaire docs. Shelf was too long and would not allow door to shut. However with some minor alterations we were able to make it fit. (rotary tool shaved off approx 3/8inch x 2 inches to fit around back corner). Issue now is that original glass is too short for the shelf.....approx 3/4 inch gap.... Frustrated that repair is not complete.....
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 13 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
had broken sheves on the doors and the crisper drawers weren't suported
The only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily.
Broken plastic guides on both crisper drawer covers. Upper crisper pan broken. Broken supports.
Remove both crisper pans and covers. Discard old frames and re-use glasses. Use two screw drivers to gently pry out broken supports. Top broken off smooth on one support. Unable to grasp with pliers to pull out. I drilled a small hole in the center of the large expansion pin. I screwed in a small sheet metal screw. Used side cutter pliers to grasp screw and gently rock back and forth to remove center of large pin. Plucked out broken pieces with needle nosed pliers. Gently tap in expansion pins to install new supports. The rest is simple re-assembly using new parts. "Nothing to it but to do it."
This is the second time I've had to replace the crisper cover, so I had that step mastered. As before, I took the glass from broken crisper cover and dropped it into new cover in seconds. Had to use a screwdriver to pry old crisper supports from the walls of the fridge. This was the only hassle. Popped new supports in, replaced crisper covers, and slid crisper drawers back into place. From now on, I'll have to be more careful about how much weight I put into crispers.
As it turns out when i pulled the drawer out and then the door holder i discovered that there was a big piece of material that was suppose to be around the water line that was causing the problem. The old drawer holder was not the problem so the new piece was not needed. All is well.
Other Parts Used:
Donald from SAN CLEMENTE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken drawer
I took out the broken drawer and replaced it with the new drawer
took out the glass popped out the cover and put the new one on and put the glass on. DONE
Other Parts Used:
harry from long beach, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken drawer support rails
I took out the shelves that the supports were on and replaced the parts very easily. study it a moment before taking off the old and then snap on the new.
just replaced the old broken one and put the drawer back .
Other Parts Used:
zenaida from lemoore, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
54 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
December 16, 2017
Need the shelf right above the top drawer. The lower 2 shelves with drawers under have a reinforced plastic . This top one is not reinforced ( but should of been, it broke in the front center.) also is a little wider than the other 2 shelves below. The refrigerator steps in about 1/2" on each side. Which piece do i need.
For model number FGHS2669KE
Hello Mark, Thank you for your inquiry. The shelf that holds the top drawer (meat/deli drawer) is part# 241969501 for the frame and part# 240443384 for the glass. Good luck with your repair!
32 people found this helpful.
Was this helpful?
Thank you for voting!
Ivette
April 5, 2018
I need to replace chill drawer (top drawer of 3 total drawers, other drawers are fresh) and the frame (not the glass). What parts do i order? Thank you.
For model number FPHS2687KF2
Hi Ivette,
Thank you for your question. The part number listed under your model number for the chill drawer or meat pan is PS2363833 and the part number listed under your model number for the meat pan shelf frame is PS2363832. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jason
August 19, 2019
The frame for our chill drawer is broken. It measures about 15 3/4" by 16 1/2". Just trying to make sure I order the right part. Thank you!
For model number FGHC2342LF3
Hello Jason, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2378645. Hope this helps!
The drawer cover at the bottom is broken for me and i still have the glass. But i cant find the shelf without the glass
For model number FFUS2613LS0
Hello Teresa, Thank you for your inquiry. The part number for the drawer cover at the bottom for your model is PS2361213. Hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Clyde
March 26, 2020
I need the upper crisper pan frame that the glass fits into. I need the plastic frame? Not sure which part number I need.
For model number FGHS2631PF4A
Hello Clyde, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS899475. We hope this helps.
I am looking for the glass insert for the lower crisper bin. That part is 240350903, but comes without . Says glass must be ordered separately....i just need the glass ! how can i order that from you?
For model number FFHS2611PFEA
Hello Tom, Thank you for the question.The glass for the bottom crisper cover is PartSelect Number PS429962. Hope this helps!
Hi, i need 3 shelves that hold all three drawers in the fridge, don't need glass for any of the shelves. The shelf that holds the top drawer (meat/deli drawer) , shelf for the middle biggest drawer and shelf for the bottom fruit/veg drawer.Thanks
For model number FLSC238DS6
Hello Elena, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS2378645 for the top Meat Pan Shelf/Cover. Part Number: PS899475 for the Upper/Middle Drawer Shelf/Cover and Part Number: PS2361213 for the bottom Shelf/Cover.Thank you for your inquiry, good luck with this repair!
I need the top and middle clear plastic drawers what parts do i need to order?
For model number FGHS2631PF4A
Hello Walter, thank you for your question. The top plastic drawer is PAN-MEAT Part Number: PS2363833 and the middle one is Crisper Pan Part Number: PS2361214. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
January 3, 2020
My top shelf of the 3 in my refrigerator has broken in the center it is the wider of the 3 shelves the bottom 2 are the same, could you please advise which i will need?
For model number FGHS2631PF4A
Hi David, if you are talking about the top shelf above the deli drawer, the part number is PS2363832. Thank you for your question and good luck with your repair!
I need the frame for the fresh drawer and the fresh drawer, do you have this available?
For model number FFSS26D8RS0
Hello Monique, Thank you for your inquiry. Part# 240351061 is the fresh food crisper drawer, and part# 240599301 is the frame for it, and both parts are in stock. Hope this helps!
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the fron...
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they attach to the refrigerator door by the back of the shelf. This part is sold individually.
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity control slide, and th...
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides molded into the fram...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2361213
Manufacturer Part Number: 240350903
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Refrigerator","title":"Refrigerator","url":"/Refrigerator-Parts.htm"},{"position":2,"name":"Tray or Shelf","title":"Tray or Shelf","url":"/Refrigerator-Trays-and-Shelves.htm"},{"position":3,"name":"240350903","title":"240350903","url":""}]
