This is a 240-volt surface burner infinite switch for a range or oven. It is for an 8-inch element. This part turns your surface element on and off, and regulates the desired heat of your element. The switch is made of off-white plastic and metal.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marc L - June 3, 2020
Verified Purchase
Easy fix
Worked great,exactly what I needed.great response time
★★★★★
★★★★★
Gary M - December 29, 2022
Verified Purchase
Easy repair
Worked as advertised. Happy with the service.
★★★★★
★★★★★
André D - April 14, 2021
Verified Purchase
Bon
Très satisfait de l’article
★★★★★
★★★★★
Eric S - December 20, 2023
Verified Purchase
All good
Fits and works fine. Pricey for a switch, but I shopped around and this was the best price I could find for this particular item. Make sure to match up the wires properly (there are letters printed in the plastic beside each contact). The entire installation took about fifteen minutes (from unplugging the range to plugging it back in).
★★★★★
★★★★★
Usain S - November 6, 2021
Verified Purchase
Excellent
I did it myself, clearly has mentioned the wiring placement.
★★★★★
★★★★★
Peter Y - July 24, 2019
Verified Purchase
great part
save a lot
★★★★★
★★★★★
Heather C - April 29, 2020
Verified Purchase
Easy Repair
Easy to install - watched a YouTube video first. Installation took approximately 15 minutes. The burner would randomly switch to high heat - this part solved the problem. Stovetop works perfectly now!
★★★★★
★★★★★
Ginette B - January 6, 2019
Verified Purchase
Everything went fine
Parts were TOP Thanks
★★★★★
★★★★★
Jiqing G - January 27, 2021
Verified Purchase
Work as expected
come fast, parts worked well.
★★★★★
★★★★★
Michael S - January 29, 2020
Verified Purchase
Works Great - Universal replacement is easy to replace the original switch.
This is a universal replacement infinite burner switch. Even though it is different from the one in my electric range, it has the parts to attach to the stove. The connections on the rear of the switch are labelled with a letter and number. These were easy to match to the corresponding letter and number on the original switch. Works great. Just look at the back of the switch and match the number to the new switch and connect.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No power to burner until after dial setting 3 reached and would not reach highest setting.
1. Remove all four control knobs. 2. Unscrew all four plastic "nuts" found under each knob holding front panel to stove. 3. Lift front panel off. 4. Removed all Phillips screws holding metal shield to which control switches are fastened. 5. Lift entire assembly up. 6. Remove two screws holding bad switch to metal shield. 7. BEFORE REMOVING ANY WIRES LABEL EACH WIRE ACCORDING TO CODE EMBOSSED ON BACK OF BAD SWITCH. These will be H1, H2, L1, L2 and P. They are not in the same place on the new switch as they are on the old one. The reason for labeling is that in case you make a mistake you have this back-up to go by. Also to double check your finished job.If just one wire is connected to the wrong terminal a disaster will happen. 8. Remove each wire, one at a time from the old switch and connect it to the correct terminal on the new switch as indicated by the codes on the back of the new switch. When done double check to be certain the labels on each wire match the code for the connected terminal. 9. Slide furnished bushing onto the new switch. 10. Insert new switch through the back of the metal shield and attach with the supplied screws. The old screws were too short in my case so be certain to use the ones supplied with the new switch. 11. Re-attach the shield assembly to the stove. 12. Install the front panel back over the switch stems. 13. Secure the front panel with the four plastic nuts. 14. Install the control knobs. 15. Test the new switch.
Other Parts Used:
Ronald from FRENCH VLG, MO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Range eye stayed on
Turned off breaker to range then removed all element control knobs. Unscrewed retaining collars I suppose is a good word removed panel. Then removed bad switch installed removed one wire at a time and placed on new switch in proper places. Reassembled in reverse order turned breaker back on worked perfect.
Other Parts Used:
Billy from Kingsport, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
January 12, 2018
The r front burner now only stays on the highest setting is this the part to correct that
For model number FES366ECF
Hello Mike, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS820835 for the right front dual burner switch. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ted
April 7, 2018
Wiring diagram from old switch to new stile switch
For model number fes367dsc
Hi Ted, Thank you for the question. Very sorry but we do not currently have a wiring diagram, but the Black goes to L1, Red to L2, Yellow to H1, Yellow to H2, and Orange to P. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Usain
November 1, 2019
Hello, the left front burner now only stays on, is this the part to correct that. (the burner is 9 to 10 inch ). Thanks
For model number CFES366FC4 / PART NO:PS2350014
Good Day Usain. Thank you for your question in regards to your unit (Model Number CFES366FC4). Based on our research you may need to replace one or more of the following parts: 1) Element (PartSelect Number PS1528767). 2) Surface Burner Infinite Switch Kit (PartSelect Number PS2350013). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sean
November 20, 2019
Can you find the part numbers for control switches for both small and large burners for my model? I’m only seeing the 8” switch number. Ty
For model number 790.46582501
Hi Sean, thank you for your question. Here are those two parts for you: PS2350013 and PS2350014. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Janie
October 4, 2023
Front right large burner turns on to high only. What switch do I need to correct this? Thank you.
For model number 79046579400 Kenmore
Hello Janie, thank you for your inquiry. If the burner is on a high setting only, you may need to replace the surface element switch, part number PS2350014, to fix the issue. It is for an 8 inches element. This part turns your surface element on and off and regulates the desired heat of your element. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gene
February 12, 2019
Will the ps2350014 switch fit for the 6" burner as well as the 8" burner? Thanks
For model number fes365ebd
Hello Gene, Thank you for your question. PS2350014 works with the back left burner on the cook top. Have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
June 4, 2019
Is this the part for big right front burner? My range f r burner stays on until i turn off breaker.
For model number Fridedaire FES367DSC
Hello Mark, thank you for writing. Yes, this is the Switch for the right front Burner on your model and should fix the issue.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
December 26, 2019
Kenmore range. Are all four switches the same? I'm having issues with the back left one. Difficult to turn on, then it will not turn off.Thanks
For model number 79046593500
Hi Joe,
Thank you for your question. Not all of the switches are the same. The switches for the left and right rear burners are the same. The part number listed under your model number for the left and right rear burner switch is PS2350013. The part number for the left front burner switch is PS2350014 and the part number for the right front burner switch is PS820835. We hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Fred
May 20, 2022
The left switch of my Kenmore electric range model 790.46354400 doesn't work properly. When I put it to 'OFF', it doesn't shut off the big element on the left. It shuts the element off when I switches it to '8'. Do you think it's a switch problem? If so, what is part number of the switch I should purchase? Thanks!
For model number 79046354400
Hello Fred, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2350014. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Joseph
November 16, 2022
right rear control switch will not shout off
For model number 790.45074400
Hello Joseph, thank you for reaching out. We have researched your model and found that the issue is likely with the Dual Infinite Switch, part number PS820835. This switch controls the dual surface element. If you require assistance to place an order, please contact customer service. We hope that helps!
This is a surface burner infinite switch kit for your range or oven. This replacement part activates and deactivates your burner, and controls the burner heat. If you are not getting any heat to your burner or it is not ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2350014
Manufacturer Part Number: 903136-9020
