Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gerald T - July 12, 2024
Verified Purchase
Happy camper
The part was right and fairly priced with good online service and from a Canadian company.
★★★★★
★★★★★
Barry B - November 30, 2023
Verified Purchase
Right Part, Right price, Right delivery time
Everything was it said it would be. Worked great. Up and running to no time.
★★★★★
★★★★★
Michelle H - August 17, 2018
Verified Purchase
Fast delivery, easy installation, works great!
The part arrived the day after I ordered it and came with step by step instructions that made it easy for me to install myself. So far, three weeks after the installation of the moisture sensor in the dryer, everything is working perfectly.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The clip broke off our sensor making it disconnect, thus we had in inoperable 'new' machine.
By undoing the single screw which holds the sensor in place, the old one falls off. To replace: simply pop the two wires on their connections (small metal studs on the back), slide clip/wire end of sensor in place and replace the screw. You are back in business! Very simple repair that a DIY can save a ton!
Other Parts Used:
Stacey from TWO RIVERS, WI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
10 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Moisture Sensor pulled out, with broken end clip
Removed screw and disconnect wires. Connect wires to new Moisture Sensor and slide clip to right side of dryer and tighten screw on left side.
Other Parts Used:
RON from CORINNA, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ronnie
July 20, 2017
Does this part have a warranty? Installed this part less 6 months ago and it has broken completely off
For model number PS2349303
Hi Ronnie, that's a great question. We offer a one-year warranty on the parts we sell. If your part has failed or broken we recommend that you contact customer service at 1-888-260-4310 or by email CustomerService@PartSelect.com to get a replacement. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
November 13, 2019
My moisture sensor broke off and one of the electrodes behind it snapped off. It's the little metal sleeve that attached to the sensor bar from behind that snapped off, so i cannot reattach it how do i replace the wiring to reattach the moisture sensor?
For model number EIMGD60LT3
Hello Mary and thanks for writing.
You will have to replace the wire harness for the moisture sensor # PS2342391.
Unplug the dryer. Always unplug an appliance before you start any repairs or installations. Dismantle the exterior of the machine. Access the moisture sensor under the lint grill. Remove the moisture sensor wire harness. Install the new moisture sensor wire ... We hope this helps. Please contact us at any time
How do I replace my moisture sensor? Part No. 134786100. Thank you. I hope I can do it myself.
For model number EIMEDD60LT4
Hello Kerry, thank you for your query. You may follow the following steps to replace the moisture sensor: use a number two square bit or a Phillips head screwdriver to unthread the screw securing the rear access panel and remove the panel. Detach the moisture sensor wires. Open the dryer door and unthread the mounting screw securing the moisture sensor. Pull the old sensor away from the rear bulkhead. Install the new moisture sensor by positioning it on the rear bulkhead, then replace the mounting screw to secure connect the wires to the terminals. Replace the rear access panel and secure it with the screw. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2349303
Manufacturer Part Number: 134786100
