Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Anne Marie B - October 23, 2023
Verified Purchase
Washer door handle
Arrived quickly. Simple to install and it fit perfectly.
★★★★★
★★★★★
Anne F - March 17, 2022
Verified Purchase
Fit like a glove. Fast shipping
Fit like a glove and was shipped fast.
★★★★★
★★★★★
CLAUDE L - October 21, 2021
Verified Purchase
Good experience
Everything has been done perfectly from the purchase to the installation. Video was appreciate.thank you.
★★★★★
★★★★★
Larraine M - August 13, 2021
Verified Purchase
Great Fix.
Happy with delivery and ease of installing. Very happy.
★★★★★
★★★★★
Kaylee C - May 12, 2021
Verified Purchase
Easy Replacement part
Fit like it was supposed to, arrived in a timely manner.
★★★★★
★★★★★
Larry U - February 12, 2020
Verified Purchase
Washer Door Handle
Good part arrived on time and an easy repair.
★★★★★
★★★★★
Michael D - June 4, 2019
Verified Purchase
Easy repair
Just what was needed
★★★★★
★★★★★
MEGAN W - March 1, 2019
Verified Purchase
Very easy repair!
Fast shipping, easy repair, excellent customer service. I couldn’t be happier; I would definitely recommend.
★★★★★
★★★★★
WAYNE M - January 14, 2019
Verified Purchase
Did the job
Although part fits well and works this is the 3rd one in 3 years. All broke in exact same place. Why can't it be improved?
★★★★★
★★★★★
Fabian F - November 4, 2018
Verified Purchase
Easy repair, great fit
Easy repair, great fit.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 26 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The handle to the door had been broken.
We had to remove the screws and take the door off the washing machine then the door glass ring. Replace and put it back on. It was really easy and save alot in repair bills.
The plastic handle on the door of a front load washer cracked at the top.
I removed the two screws holding the old handle on and then then installed the new handle
Other Parts Used:
Michael from Dexter, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
18 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer door handle broke
unscrewed the old handle, and screwed the new one on. It only took 2 minutes to fix. Very easy!!
Other Parts Used:
mandy from rock falls, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door handle broke off at the top
Like another commenter, my teenage daughter ripped the handle off at the top in a huff. My husband simply unscrewed the broken handle and replaced it with the new one. We now make sure to open the door from the middle of the handle, not the top.
Other Parts Used:
Mary from Oswego, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door handle to the front load washer had broken off
Very easy. Remove 2 screws from the inside of the door. Take out the broken pieces and screw in the new one using the old screws.
Other Parts Used:
Francine from Wolcott, VT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The control console broke when we stacked some heavy item on the edge of this front load washer and the door handle broke from wear and tear.
First I removed the visible screws on the front of control panel. When I tried to remove it I realized it was also being held in place by the top coverof the washer. I next removed the screws holding the top cover in place and slid it back uncovering a few more screws holding the control console in place. The wiring pane was also held on the console with screws so i roved them and popped the old console out. After that I just replaced everything in reverse order and screwed the new console back in place. The door handle was alot more simpler. All I did there was open the door and remove the two visible screws on the inside of the door and the broken handle came off. I placed the new handle in place and screwed it on. These repairs were simple and once done I realized that it took no time at all.
after clearing shelving. It took about 20 minutes to remove the dryer stacked on top, along with the gas line and the vent hose..... Two screws and gently pry the back up with a screwdriver and the top pops off. open the door and remove the 2 screws while reaching down inside and the switch come right up with its 3 plug harness. swap the old switch unit for the new one and slip it back down into place and reinstall the screws, and done in about 15 minutes.
my belt is in good shape so I will save the one I bought for later. the handle is 2 screws and took less than 2 minutes. It took about 20 minute to put the washer/dryer units back together and against the wall and running
Very easy to fix. Diagram on web page was very helpful. Part was delivered over night. Great service.
Other Parts Used:
Mark from Gambier, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken handle.
Removed screws and screwed in new handle.
Other Parts Used:
Bernard from Towson, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door handle
removed the two screws that were attached to the old door and put the new door on.
Other Parts Used:
Geraldine from Lansing, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ben
April 6, 2018
Hello, I need a new door handle for my Frigidaire washer and want to make sure that I get the right one for this model number
For model number FTF2140FS1
Hello Ben, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS2330842. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Malinda
November 28, 2018
Hello, i need a new door handle for my Frigidaire washer and want to make sure that i get the right one for this model number.
For model number GLTF2940FS2
Hello Malinda, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS1145959. Thank you for your inquiry, good luck with this repair!
