Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Alison B - August 8, 2020
Verified Purchase
Dryer door catch replacement
Part was exactly what I ordered and needed. Delivered to my door the day after I ordered it and took me 30 seconds to install!
★★★★★
★★★★★
Keith K - June 9, 2020
Verified Purchase
Dryer Door Catch
Everything was as promised. The right part was shipped, received, and installed within a couple of days. Second time using this site. Without a doubt will be back.
★★★★★
★★★★★
Vic L - June 3, 2020
Verified Purchase
Easy repair
Came quick, it was the exact part that I needed and the instructions were very detailed
★★★★★
★★★★★
Abraham O - May 19, 2020
Verified Purchase
Worked very well
Easy to fix. The video in the site helped.
★★★★★
★★★★★
Tahlia P - May 12, 2020
Verified Purchase
Quick shipping, correct part
It was so easy to find the part I needed and it arrived very quickly. Very happy to have my dryer back!
★★★★★
★★★★★
SHERRY H - July 26, 2019
Verified Purchase
Excellent
Perfect
★★★★★
★★★★★
Mike C - May 12, 2019
Verified Purchase
It was an easy repair.
I did not need the metal male part thankfully because it would not have worked properly. I only needed the plastic female part.
★★★★★
★★★★★
Chris D - January 21, 2019
Verified Purchase
Easy repair
Just pulled out old part with needle nose plyers and pushed in new part.
★★★★★
★★★★★
DON M - December 13, 2018
Verified Purchase
Good service and good part.
The part was delivered promptly and was a relatively easy repair.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 24 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
catch mounted on door broke
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in.
Other Parts Used:
Paul from Mt. Pleasant, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
93 of 123 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the door on the unit wouldn't stay closed
removed the dryer female part that was broken with needle nose pliers and inserted the new one, on the door i removed one phillips screw and r/r the male piece with the new one and re-inserted the screw. that was all, very easy repair
I just inserted the door catch, which by the way fit in perfectly. Thanks. Took 5 seconds to repair.
Other Parts Used:
Inocencio from Edinburg, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
14 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old latch broke
I inserted the clip
Other Parts Used:
Jim from Germantown, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
8 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer door latch was broken.
The replacement part just snapped into place. (The old part had fallen out) It took less than 30 seconds to do the repair.
Other Parts Used:
Jack from Memphis, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Female End Of The Door Catch Broke
First I put the square female end iof the door catch kit nto the square hole as snug as I could. Then I gently pushed the door against the piece until I heard it click in to place. That's it!! Sooooo simple--
Other Parts Used:
Tara from North Canton, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door wasn't staying closed
popped up top of dryer -- With pliers squeezed clips on inside of latch - - with screw driver pryed latch out -- just pused new latch in.......... Thanks to parts select for sending part sooo fast.. wife was happy.. Thanks, Dale
Other Parts Used:
Dale from Livingston, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Catch
Watch the video. Very, very easy
Other Parts Used:
James from LARAMIE, WY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not stay shut
Took off the four screws to get to the female clip and used pliers to squeeze it out. Next was using pliers to pinch out the male connector and place the new one in.
Other Parts Used:
Eli from North Stonongton, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door would not lock, knob broken
called SEARS told part not available any longer. Would have to purchase new dryer. Also told part could not be ordered from MAYTAG due to age. Called PART SELECT and had new parts in four days. Put new knob on, Placed door lock in hole, JOB DONE (15 minutes) saved $ 500 to $600 on new one. Wayne
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
November 25, 2017
Looking for dryer latch kit for Speed Queen dryer he5003w
For model number HE5003W
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS2162263. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Stuart
May 13, 2019
Does this part fit this model or do you know the part number that does?
For model number 20E107
Hello Stuart, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sylvia
October 28, 2019
Maytag bravos, above model, serial # mw3006680. Broken female part of latch located in dryer door. What would be the part number please?
For model number MED6400TQ0
Hello Sylvia, thank you for inquiring. That would be the Door Catch, part number PS11748369 for your model dryer. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
November 7, 2019
How to remove door strike and install door strike
For model number MDE9206AYW
Hi Mike, please watch our video here https://www.youtube.com/watch?v=i-9zZhKY02o. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
KEN
February 25, 2020
Dryer stops mid cycle. Press start button once and dryer completes cycle. Sometimes when i press start button dryer hums. If i turn the timer knob a little and then press start button it completes the cycle.
For model number LDE7334ACE
Hello and thank you for writing.
It certainly sounds like it could be a faulty door catch PS2162263 and door switch PS1964648 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. Also, you should make sure your timer itself PS11757529 is not loose with its connections. We hope this helps. Please contact us anytime if you require further assistance.
