Maytag/Maytag_Thumb/36053.gif
See part 33 in the diagram
Replacing your Maytag Dryer Door Latch Kit play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Door Latch Kit

★★★★★
★★★★★
8 Reviews
$9.21   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your DE19CA!
 Fits your DE19CA!
PartSelect Number PS2029855
Manufacturer Part Number 306436
Manufactured by Whirlpool
Product Description

Door Latch Kit Specifications

This dryer door latch kit comes in two pieces: a door latch, and a door strike. It's used to help hold your door shut to your dryer.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door won’t close | Will Not Start
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Maytag, Amana, International, Jenn-Air.
Part# 306436 replaces these:
AP4037288, 3472, 306436, 33001791, R0601523, W10116757, Y313912
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
January 18, 2018
Will this latch fit this model Admiral
For model number AGD4675YQ1
Hello Jim, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11741434 for the catch and Part Number: PS11741661 for the strike. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Alicia
April 2, 2019
Will this work for my Maytag? The part on the door is metal not plastic.
For model number LDE8200ACW
Hello Alicia, Thank you for contacting us. I have researched the model you have provided and can confirm the PartSelect Number: PS2029855 is correct for your appliance. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Jeff
January 13, 2020
I need the door latch kit for this model. Can you help? The plastic prong broke off.
For model number LSE7804ADE
Hi Jeff. The correct kit is linked below. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Raymond
July 8, 2021
Roaring sound at rear of drum in spin cycle. Maybe rear shaft bearing at high speed?
Hello Raymond, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Gary
June 14, 2022
what door latch part will work for a Maytag model LDE712 series 02
For model number LDE712
Hello Gary, Thank you for your inquiry. We have researched the model number that you have provided and show the door latch kit as part# PS2029855. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Karen
January 18, 2020
The dryer will not start when I close the door it wants to do nothing please help me and do the knob that starts the dryer does it push in or how does it operate.
For model number DE409
Hello and thank you for writing. It certainly sounds like it could be a faulty door latch PS1964648 and/or possibly a faulty drive motor PS3500893, you should check for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance. For your convenience, we have attached the link to your service manual. We hope this helps. Good luck with your repair. http://www.youserguide.com/wiki/Maytag_DE409 Usually, you pull out the button to start and push in to stop your dryer. We hope this helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Related Parts:
Kristine
October 28, 2019
Does this kit work for Maytag ldg212 dryer? Thanks!!
For model number LDG212
Hello Kristine, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2029855. Hope this helps!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Maytag Dryer Door Latch Kit

Replacing your Maytag Dryer Door Latch Kit play video
Customer Repair Stories
 Average Repair Rating: 4.7 / 5.0, 35 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
noisy rollers, broken latch
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job.
Thank you.
Other Parts Used:
Drum Support Roller Kit
  • gerry from west covina,, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable), Wrench set
631 of 656 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door latch broken
I used my screw driver to pry the old female end of the latch from the dryer unit. I forced the new female part of the latch into the hole and bang...45 seconds later the door closed securely --like new!
Other Parts Used:
  • thomas from appleton, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
45 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace worn out & broken latch assembly
Just used a needle nose plier to remove the broken part, and inserted by hand the new part.
Other Parts Used:
  • Rolland from Las Cruces, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
19 of 616 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken clip for door latch
popped out old female clasp on dryer itself with screwdriver, undid 2 screws on dryer door and door handle with phillips screwdriver, popped in new male clasp part, put door knob back on and put the two screws back in door and it was all set to go. Less than 15 minutes to do. Better than new and wife is happy. No more duct tape holding door closed now.
Other Parts Used:
  • Shawn from Dover, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
14 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer door latch broken, using duct tape every time to dry clothes.
Piece of cake. Used flat screwdriver to pry out female part on cabinet side, same with the male part on door. Every new replacement part was tight and operated like new. Thanks Part Select, you'll be forever on my list of online parts buying.
Other Parts Used:
  • Scott from Palm Bay, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch was broken over 15 years
Old latch and door striker were pried out with a flat blade screwdriver. New components popped right in. Repair was less than two minutes.
Other Parts Used:
  • Ken from Rochester, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blower fan was broken and spinning on the motor shaft
Removed front cover, removed housing cover, took old fan off, installed new fan, put covers back on.
Your instructional video was very helpful. He told which screws to remove to get the covers off. I was unsure about how access the fan until I watched. Well done!
Other Parts Used:
Blower Wheel with Clamp Retaining Ring
  • Roger from Owatonna, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing, probably broken female latch part
Press in the new female latch part with thumbs. Took about two seconds!
Other Parts Used:
  • claude from laguna niguel, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not stay closed.
I used a flat screw driver to pop out the old female portion and snapped in the new one. Dryer stays shut. That's it!
Other Parts Used:
  • karl from monroe, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer door would not stay closed
1. Popped out old latch from dryer with a screw driver and pressed in new latch with fingers. Did not need to replace the part that is in the door. Very simple repair.
2. Lint filter was worn out and needed replacing.
Other Parts Used:
Lint Filter
  • William from Fullerton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.4
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2029855
Manufacturer Part Number: 306436
Brand
Model Number
Description
Maytag
BDE590
Dryer - Electric
Maytag
BDG410
Dryer - Gas
Maytag
BDG810
Dryer - Gas
Amana
CE2402
Dryer - Electric
Amana
CE9002
Dryer - Electric
Amana
CG2412
Dryer - Gas
Amana
CG2412 P7762236W
Dryer - Amana Dryer Model CG2412 P7762236W (CG2412P7762236W) Parts
Maytag
DE106
Dryer - Electric
Maytag
DE107
Dryer - Electric
Maytag
DE110
Dryer - Electric
Maytag
DE180
Dryer - Maytag Dryer Model DE180 Parts
Maytag
DE18CA
Dryer - Electric
Maytag
DE18CM
Dryer - Electric
Maytag
DE18CS
Dryer - Electric
Maytag
DE18CT
Dryer - Electric
Maytag
DE19CA
Dryer - Electric
Maytag
DE19CD
Dryer - Electric
Maytag
DE19CS
Dryer - Electric
Maytag
DE19CT
Dryer - Electric
Maytag
DE210
Dryer - Electric
Maytag
DE212
Dryer - Residential
Maytag
DE21CA
Dryer - Electric
Maytag
DE21CM
Dryer - Electric
Maytag
DE21CS
Dryer - Electric
Maytag
DE21CT
Dryer - Electric
Maytag
DE22CA
Dryer - Electric
Maytag
DE22CS
Dryer - Electric
Maytag
DE22CT
Dryer - Electric
Maytag
DE23CD
Dryer - Electric
Maytag
DE24CA
Dryer - Electric

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service