Whirlpool 22001190 - Injector Hose | PartSelect.ca
Injector Hose – Part Number: 22001190
Injector Hose – Part Number: 22001190 https://partselectca.azureedge.net/Schematics/Maytag/53035.gif

Injector Hose

Your Price

PartSelect Number PS2019430
Manufacturer Part Number 22001190
Manufactured by Whirlpool

This part works with the following brands: Maytag, International.

This part works with the following products: Washer.

This part fixes the following symptoms: Leaking.

Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 3.8 / 5.0, 2 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Gregory from Louisville, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
22001190, WP22001187, WP22001186, WP596669, WP489503
leaking water under back left of washer
The first thing I did was look at the diagrams for my specific appliance on the parts select web site to locate fastners. I removed the front panel(2 screws 4" from floor on front panel), then removed the corner bolts of top panel(found under in front). Next I removed the 4 screws on the control panel (on top). I located the screw holdling the fill injector to the top Lid. Then I removed the clamp holding the unit to the regulator. Assembled the unit and placed it in position. First attaching the fill injector to top panel, then clamping the hose to regulator, then replacing 4 screws in control panel. Next the two corner screws in corners under the top panel. Replaced front panel and 2 screws. Then had a trail run and no water leaks any where.
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Martha from Bryan, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP22001274, 22001190
Water was leaking down under machine from water inlet valve
I was really glad the parts took only two days to come in. My son did the work and very easy for him. I handed him the tools. Take inlet hoses off, go into back and top of machine to reconnect injector hose to tub. Then connect hose to intake valve replacing two clamps and connecting inlet valve to back of machine. Reconnect two water hoses to back of inlet valve and to the faucets.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?