Surface Burner Knob Kit

All of the "old" pieces were very easily removed and replaced with the new pieces. The update looks terrific and works just fine!

I used pliers to remove old knobs and just inserted the new ones. I had tried using cheap generic knobs that did not work.

opened shipping boxes, unpacked, unplugged old units, knobs and filter, repacked old units into boxes, plugged new units in, total time less than five minutes.
Looks and works like a new unit.

I lifted off the old knobs, pushed on the new. Easy and the cooktop looks brand new!

I removed the old knobs and replaced with the new ones. We also replaced one of the switches which the knobs fit on, because I broke the switch off with a Cast iron skillet.

removed all for knobs and replced with new ones

Oh this was a toughie and I was sweating it out.
With a delicate touch I removed the old knob and pushed on the new knob, 5 seconds

our cook top is so old, but no need to replace just yet. so I ordered new knobs to get a new look
thank you!

I pulled off the other 3 old knobs. Pushed on the new ones, which pushed on hard, but work. They stick out farther than the originals. They look a little different, but only to me. No one else would notice.
The main part is, it works. A little spenty for my taste, but did not know where else to go and they arrived very quick.

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires and replaced the connections in sequence. It was easy. BUT, be sure the circuit breaker is disconnected if you want to enjoy the fruits of your labor. I figure I saved about $1100 by not having to buy a new stove top and I now have an almost new one. The cook appreciates it too.