Water Tank Assembly

Hello Jeff, thank you for your question. The tank should be replaced. There shouldn't be any discoloration in the tank. I hope this helps!

Hi Vicki, Thank you for your inquiry. The tank should be BPA free. For more information you will need to contact Whirlpool. Their telephone number is 1-866-698-2538. Thank you and have a great day!

Hello Catherine, Thank you for your inquiry. We show that this part will work for your model. If you remove the crispers and the pantry drawer the reservoir will be located behind them, There will be a couple of screws holding it in place. Remove the screws and pull the unit from the wall and remove the cover over the back where the tubing comes from the area of the reservoir. Follow the lines and disconnect them and then go to the front of the unit and pull the reservoir out. Good Luck with your repair!

Hello Al, thank you for writing. The source of the leak could be due to either a faulty Primary Water Valve part PS11738512, Water Tube part PS11730901, or the Secondary Water Valve part PS2003637. We hope this helps.

Hello Annmarie, Thank you for the question. Empty the water from the reservoir that is typically behind the crisper. Vinegar can serve as a good refrigerator water line cleaner. Clean it out with 1 gallon of warm water and 1 cup of vinegar mixed together. Flush water through the water reservoir and finish by flushing with fresh water.

Hello Annmarie, Thank you for the question. If you remove the crispers and the pantry drawer the reservoir will be located behind them, There will be a couple of screws holding it in place. Remove the screws and pull the unit from the wall and remove the cover over the back where the tubing comes from the area of the reservoir. Follow the lines and disconnect them and then go to the front of the unit and pull the reservoir out. Once removed you can empty the Tank. We hope this helps!

Hello Christi, Thank you for the question. If you remove the crispers and the pantry drawer the reservoir will be located behind them, There will be a couple of screws holding it in place. Remove the screws and pull the unit from the wall and remove the cover over the back where the tubing comes from the area of the reservoir. Follow the lines and disconnect them and then go to the front of the unit and pull the reservoir out. Once removed you can flush out the tank. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Gerald, thank you for your question. From the symptoms, it looks like the fridge is getting too cold. The parts that can cause this problem are Thermistor (part number: PS2003772) and Damper Control Assembly (part number: PS11750106). Before replacing the tank it is recommended to turn off the water supply. We hope this helps, please feel free to contact our customer service if you need further assistance.

Hello Susan, thanks for the question. To replace the water tank assembly, you must remove the crisper and panty drawers, and the tank will be located behind them. You will need to remove the cover over the back where the tubing comes into it, to disconnect the tubes. The tank is held in the front by a couple of screws. Simply unscrew them and pull the tank out. To install the new one, reverse your steps. We always recommend turning off your water supply to the fridge before attempting this repair. Hope this helps!

Hello Jennifer, Thank you for the question. I suggest replacing the water filter first if it has not been replaced within the last 6 months. Also check the ice tray in the ice maker its self. The coating can wear off over time and get into the ice. You can check the water lines and then the tank. Hope this helps, good luck with this repair!