Part Location Diagram of 12001991 Whirlpool Ice Dispenser Solenoid and Door Kit
See part 8 in the diagram
Replacing your Maytag Refrigerator Ice Dispenser Solenoid and Door Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Ice Dispenser Solenoid and Door Kit

★★★★★
★★★★★
7 Reviews
$202.42
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2003478
Manufacturer Part Number 12001991
Manufactured by Whirlpool
Product Description

Ice Dispenser Solenoid and Door Kit Specifications

In addition to the solenoid (115V), this kit also comes with a door strike and an ice door assembly. Please be advised the spring and roll pin are not included with this kit.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Refrigerator Ice Dispenser Solenoid and Door Kit

Replacing your Maytag Refrigerator Ice Dispenser Solenoid and Door Kit
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Not dispensing water | Door won’t open or close | Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Jenn-Air, Crosley, Admiral.
Part# 12001991 replaces these:
AP4009082, 940492, 12001991, 12001991, 61003121, 61003311, 61005560
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.9
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 73 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Ice Dispenser "round chute" broken side tab, ice/water fountain not working
I could see that a tab was broken from the round chute that opens for ice dispensing and closes to seal off freezer ice chute when not in use. With the tab broken, the round door would not shut to seal the freezer chute and dispensing water would spatter everywhere. I looked for just the round door part, but is only sold in the "Ice dispenser solenoid and door kit" I only had to use the round chute/flap from the kit. The instructions were easy to follow and I had the fridge back working in about 10 minutes. It took me longer to find the right star headed screwdriver that I needed to remove the Maytag star screws (5) total. Because I didn't have to replace the solenoid or the spring mechanism, this was especially easy, and now I have those parts on hand if one day I need them!!
Other Parts Used:
  • Scott from Walker, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
119 of 129 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fountain flap was broken and let warm air in.
We just followed the instruction sheet that was included in the parts package. (instruction sheet has pictures) I just removed the 2 screws from the front and then disconnedted the element. unscrewed a couple more screws put on the new parts and reconnected the element put back the screws and it was done! I'm a single womand so me and my 23 yr old daughter did this project together. I ordered the parts early in the day and got them the next day. I only paid for 2-3 day shipping. I have ordered parts from Sears. They never have them in stock! The last order cost me $19.95 to ship. I waited more than 2 week for them to arrive. With Partselect the job was finished in 3 days!!
Other Parts Used:
Water Filter Upper Hinge Cover
  • Rita from Kansas City, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
40 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Ice and Water Dispenser Would Run on After the Glass Was Removed
I am going to be completely honest here. This problem had persisted for months. I finally decided that I would buy all the associated parts and repair the unit hoping to cover the problem. Much to my surprise, after carrying out the repair, using the instructions provided by PartSelect, I still had the problem. I decided to remove and LUBRICATE the button which depresses the Limit Switch when you push a glass against the rubber membrane. Low and behold the problem was solved. The frig is nine years old, so I feel I may have prevented other problems in the future by replacing the three parts. It was a follow the directions sort of repair. I was very pleased with PartSelect response to my order (received it next day) with standard shipping.
Other Parts Used:
Limit Switch - 2 Terminal Dispenser Control Board
  • Doug from Berkeley Springs, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
23 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Door Would Not Open
Jenn-air jcd-2389gtw refridgerator/freezer side by side ice door would not open to dispense ice from the ice dispensor I did an online order for the repair kit #ps2003478 (115v) ice dispenser solenoid and door kit to fix the problem with the ice door not opening. As I had deduced, the “solenoid” had gone bad, and the kit held most all the items required to make the repair. The only additional item the kit needs to have is the “fountain door return spring”. Be careful not to loose the spring when disassembling the unit. You might want to order an additional spring just in case you loose or break the original. The instruction sheet was pretty thorough, except for being small and the pictures hard to see. My refrigerator/freezer has decorative panels that had to be removed before I was actually able to get the escutcheon off of the unit, and this configuration wasn’t addressed in the instructions. After figuring out that I had to remove all the trim from the door of the freezer before I could start the repair, the job wasn’t that difficult, but you have to have patience and take your time to make sure you don’t damage the electrical components of the ice dispenser. Make sure you note the position and location of the fountain door return spring before you remove the ice door!! This is important so that you can get the correct “tension” when reinstalling the mechanism. If there isn’t enough tension on the spring, the door will not seal properly, and the dispenser will freeze up. Also, when it comes time to disconnect the “electrical edge connector” from the control panel, be sure to make note of it’s position. It isn’t difficult to pull off, but could be easily broken if you are not careful. The rest of the repair and installation is straight forward and simple. Just take your time and it goes back together pretty easily. Tools you will need are; needle nose pliers, phillips screwdriver with a small and medium bit, and a “torx” tool set to remove the torx screws from the escutcheon and fountain bracket.
Other Parts Used:
  • Stanley from Southlake, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
21 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the flap holding the ice back broke
First I cut the power to the refrigerator. Followed the instructions for removing the door panel. Disconnected the electrical panel to the door controls. replaced the flap only and reassembled. Hate I had to by the solenoid when all I needed was the flap. Ordered the part and had it the next day, very fast shipping. I have used PartSelect for other appliance parts and had good service from them.
Other Parts Used:
  • CHARLES from PARSONS, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
21 of 647 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The part that closes with the solenoid broke off and did not close the ice maker
I removed the two screws that hold the element in place. I then unscrewed the four remaining screws with a star screwdriver and pulled the element out and disconnected the wire. I removed the part containing the solenoid, spring loaded holder and the plastic closer. I did not need to replace the solenoid or the spring loading device only the round circular piece that opens and closes the ice door. I just snapped it into the spring loaded part and replaced everything as I had removed it. It was very simple. Your need the star screwdriver though for removing the screws.
Other Parts Used:
  • Karen from Rocky River, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door flap not opening correctly and noise when pushing button for water
This repair was relatively easy due to the instructions provided and took about 15 minutes. Originally, I had bought a door flap thinking that was the problem (a small plastic piece on the flap had broken off) but after replacing that the assembly still would not allow ice flow. I then purchased the kit including solenoid and the repair worked. I had a bad solenoid all along. My suggestion is to replace the entire kit rather than one part as it is likely all parts need replacement.
Other Parts Used:
  • Charles from Allen, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
13 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker selnoid malfunctioned.
I called PartSelect and was greeted by a real live person instead of a recording. The lady was very helpful and kind. We decided on the part that I needed, and it arrived to my home in less time than she said it should. I completed the repair with the instructions provided in just a short time. My experience with PartSelect was positive, and it reminded me of the way businesses used to be. I highly recommend them.
Other Parts Used:
  • Robert from Kokomo, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken ice door chute
first unplug the refrigerator (power) remove the dispenser platform (removable) remove two torx screws, slide the cover up unplug the wire from the cover by sliding the ribbon tape up from the circuit board, remove the three torx screws slide the plastic from the hose (water dispenser hose) unplug the electrical (2) remove the two torx screw from the magnetic relay reassemble the door about 15 minute if you know what you are doing
Other Parts Used:
Ice and Water Dispenser Housing
  • Alexander from Raleigh, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
11 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control board and fountain backet damaged by burned out solenoid.
Removed damaged fountain bracket by removing the torx screw using torx head screw driver. Install new control board and new solenoid onto the new fountain bracket using existing screws. Reinstall fountain bracket to the freezer door.
Other Parts Used:
Electronic Control Board Fountain Bracket - White
  • Wing from Stockton, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

7 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
October 16, 2017
The round door that opens and closes to let ice through the door is no long attached. We also saw a flat piece of plastic that appears to be snapped and broken. Do you think that if I purchase the ice dispenser solenoid and door kit that all needed parts are included? Thanks!
For model number MSD2356AEW
PartSelect logo
Hi Thomas, Thank you for the question. Yes this kit will have all the parts needed for the repair. Here is a link to our video on how to install the kit as well. Good luck with the repair! https://www.youtube.com/watch?v=ayor3sjmQDs

9 people found this helpful.

Was this helpful?
Thank you for voting!
Michael
February 14, 2019
Sometimes water flow from dispenser continues for several seconds after removing pressure from the actuator. I took the unit apart and cleaned it but it didn't resolve the issue. Any suggestions on what should be replaced?Thanks, michael
For model number MSD2756DEW
PartSelect logo
Hello Michael, Thank you for contacting us. I suggest checking the following parts: PS11743234 Limit Switch - 2 Terminal, PS2060970 Double Outlet Water Valve and PS2003478 Ice Dispenser Solenoid and Door Kit. Good luck with your repair

2 people found this helpful.

Was this helpful?
Thank you for voting!
David
September 26, 2019
Lately the water dispenser switch has been sticking in the open position. That is to say, when you put a glass against the grey rubber panel and press to dispense a glass of water, the water continues to flow after the glass has been removed. In order to turn it off i have been having to push on several places on the grey panel.
For model number MSD2656DE
PartSelect logo
Hi David, it sounds like some of the door on the door may be getting stuck in the open position causing water to come out after the water should shut off. You can try and take it apart see if it needs cleaning or a damaged part may need to be replaced entirely. Thank you for your question and good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
November 12, 2019
I reinstalled the ice dispenser door and lost power on the ice maker. The refrigerator and freezer are still running but the lights on the ice dispenser panel are out and nothing runs..
For model number MSD2454GRQ Refrigerator
PartSelect logo
Hello Mike and thanks for writing. Look for the Reset Button To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker, push this button in and hold it for 10 seconds. We hope this helps. Please contact us at any time

1 person found this helpful.

Was this helpful?
Thank you for voting!
Greg
January 24, 2018
The water dispenser released a full flow of water without a demand. Ice maker does work on demand. Once i shut off water valve at the wall and power, only the water line is inop. Any ideas? Thanks!
For model number JCD2389DEW
PartSelect logo
Hi Greg, Thank you for your question. I would actually suggest that you check your water inlet valve. You valve has two solenoids on it, one for your ice and one for your water dispenser. It could be that the ice is working and the water is not. You would be able to test this part with a multi meter. Test each solenoid to make sure they are both working. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mike
March 8, 2018
The ice and water dispenser is not working and the dispenser door is not opening is it the solenoid or the dispenser circut board? I can't seem to find the exact model or the circut boards for any of the mzd2766ge models
For model number MZD2766GE*
PartSelect logo
Hello Mike, thank you for your question. I would recommend replacing the Ice Dispenser Solenoid and Door Kit 12001991 first. That is the most likely issue. If the solenoid doesn't fix the issue the other option would be the Dispenser Control Board Part Number: WP61005274. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Bob
September 26, 2017
Ice maker and chute keep freezing up. Door going up to chute seems to be closing. Took apart ,spring to close door ok. Any idea what is wrong.
For model number MSD2456GEQ
PartSelect logo
Hi Bob, Thank you for your inquiry. If the ice maker and ice chute are freezing up then it may caused by a number of factors. It may be caused by a frozen ice maker fill tube, a faulty water inlet valve, the temperature in the refrigerator is too low or the water filter needs to be replaced. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2003478
Manufacturer Part Number: 12001991
Brand
Model Number
Description
Kenmore
61004752
Refrigerator
Kenmore
61004753
Refrigerator
Kenmore
61004754
Refrigerator
Amana
ARS2760BW
Refrigerator - Side-by-side
Admiral
ASD2120DRQ
Refrigerator - Side-by-side
Admiral
ASD2120DRW
Refrigerator - Side-by-side
Admiral
ASD2123DRA
Refrigerator - Side-by-side
Admiral
ASD2123DRQ
Refrigerator - Side-by-side
Admiral
ASD2123DRW
Refrigerator - Side-by-side
Admiral
ASD2514ARA
Refrigerator - Side-by-side
Admiral
ASD2514ARQ
Refrigerator - Side-by-side
Admiral
ASD2514ARW
Refrigerator - Side-by-side
Crosley
CS21A5DA
Refrigerator - Side-by-side
Crosley
CS21A5DW
Refrigerator - Side-by-side
Crosley
CS21B5DA
Refrigerator - Side-by-side
Crosley
CS21B5DQ
Refrigerator - Side-by-side
Crosley
CS21B5DW
Refrigerator - Side-by-side
Crosley
CS21F5DW
Refrigerator - Side-by-side
Crosley
CS21G5DQ
Refrigerator - Side-by-side
Crosley
CS21G5DW
Refrigerator - Side-by-side
Crosley
CS23A6DA
Refrigerator - Side-by-side
Crosley
CS23A6DW
Refrigerator - Side-by-side
Crosley
CS23B6DA
Refrigerator - Side-by-side
Crosley
CS23B6DQ
Refrigerator - Side-by-side
Crosley
CS23B6DW
Refrigerator - Side-by-side
Crosley
CS24G6DB
Refrigerator - Side-by-side
Crosley
CS24G6DQ
Refrigerator - Side-by-side
Crosley
CS24G6DW
Refrigerator - Side-by-side
Crosley
CS25A7DA
Refrigerator - Side-by-side
Crosley
CS25A7DQ
Refrigerator - Side-by-side
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service