Average Repair Rating: 4.4 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
rusted part
replace it.
Other Parts Used:
Hoin from Staten Island, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
9 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My two front burner igniters failed to light
Fixing the problems were very easy. I first unscrewed the gas lines and burners. I replacecd the fitings and burners. Ignitors came with the burners. I decided while I was repairing the stove, I should replace the burners too. I am not a mechanic or repair man but a police officer who had little trouble bringing my stove up to being in fairly new condition and saving hundreds of dollars in replacemet. The people at the parts order desk were friendly and even expedited one order of mine because of a miscomunication and am sure it was all mine. Thank you for being so helpful.
It was very easy: A found 1/3 of sealed burner was leaking. Google how to order oven parts: the size and the picture in internet are really helpful. When I ordered this parts, I was pretty sure that it was definitely a right order. I order it after I back from Thanksgiving party. I took total 30 min to finish this order. When I got the parts, just used 5 minute to replace it.
Other Parts Used:
ping from Edison, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner was rusted out and would no longer light without a match.
It was super easy. It is a one piece part with two wires coming out of the stove body to connect to it. The hardest part was wiggling the wires off of the old connections on the old rusted out burner. Once I got that done I plugged in the wires, set it back into place and it lit beautifully
Other Parts Used:
Duretta from SACRAMENTO, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Duretta
July 4, 2019
I have to light this burner with a match. It appears to be rusting out so there are flames shooting out underneath the burner instead of just out of the holes. I am doing this by myself, so I want to make sure that it is easy to put back together after I take it apart. I want to make sure that this will fix that problem.
For model number CGR3742CDC
Hi Duretta,
Thank you for your question. This should be a fairly easy repair to do. To remove this burner, you will need to twist it and lift it off. If it is stuck, then you will need to use a rubber jar lid remover to remove it.
Once it is removed, remove the wires connected to it and install the new burner. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
