Bake Element - 3400W

Hi Tom, Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the temperature sensor, the main terminal block, the bake element and the broil element. I hope this helps. Thank you and have a great day!

Hello Tanner and thanks for writing. Yes. Part Number: PS1992188 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.

Hi Vandean, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

Hi Kelly, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multi-meter. When testing the sensor with a multi-meter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the oven sensor checks out, you will need to check the electronic control board, both the bake and the broil elements and the wiring between them to see what part may be causing the issue. We hope this helps. Thank you and have a great day!

Hi Naomi, Thank you for your question. If the upper oven is not heating correctly, then you will need to check the temperature sensor, the wiring between the temperature sensor and the electronic control board, the electronic control board and the bake and broil elements. I hope this helps. Thank you and have a great day!

Hello Sandra, thank you for inquiring. This sounds like a faulty Temperature Sensor, part number PS820208 for your model. You may also want to consider the Main Terminal Block, part number PS471605. Good luck with your repair!

Hello Gord, thank you for inquiring. This Bake Element is not shown as compatible to your range. The replacement Bake Element for your model range is part number PS438018. Good luck with your repair!

Hello Aaron, thank you for writing. We would suggest replacing it to prevent any further issues. The replacement for your model is Shield part number PS1528633. The replacement Bake Element for your model is this part number PS1992188. Good luck with your repair!