This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and then the washing program begins.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire, Crosley, Electrolux, Kenmore.
Part# 134762000 replaces these:
AP4298882, 1258528, 134407800
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer gave error code 31
I opening that top from the rear and saw the same part order plugged in then new part attached it properly and then was done.
Other Parts Used:
Tyran from Montclair, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rau
January 9, 2019
Where are the water level pressure switch is located thanks.
For model number FAFW3801LW5
Hello Rau, Thank you for the question. The switch is located at the Right Front corner under the top of the appliance. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tammara
November 23, 2019
Washer would not turn on. Replaced control board per technician. New board lights up etc but when start pressed just lights up sounds like machine locks then after few moments shuts off without filling.
For model number GLTF2940FS2
Hi Tammara, hard to say what is causing it, it could be a faulty door strike PS890617 or door lock and switch PS12364048. Thank you for your question and good luck with your repair!
