Get your refrigerator cooling again with this genuine compressor start device. It helps your compressor start smoothly so your appliance can keep food fresh. If your fridge isn’t staying cold or the compressor keeps clicking, this part is likely the fix. Easy to install and built for reliable performance, it restores efficient cooling quickly.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Electrolux.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
January 2, 2024
This freezer is 14 months old. The compressor started short cycling. You plug it in and it funs great for 12 or so hours. When it gets to temp, the compressor runs a few seconds, then off for less than minute. The temp starts to rise. We replaced the control board. Help
For model number FFUF2021AW0
Hi Tom, thank you for contacting us. Based on the description, the issue is with the start device, part number PS16620630. We would suggest replacing the start device to fix the issue. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Julie
November 13, 2024
FREEZER NOT FREEZING AND COMPRESSOR NOT RUNNING FRIDGE IS COLD THOUGH
For model number LFTR2045VF3
If the start relay is PS16620630 defective, replace it using the instructions below. boosts electrical power to the compressor to allow it to start running. How to Test the Start Relay with a Multimeter
Disconnect the freezer from the power outlet for your safety.
Remove the access panel covering the compressor and start relay.
Locate the start relay on the side of the compressor and take a picture of how the wires are routed.
Disconnect the wire harness that connects the start relay to the compressor.
Refer to your user manual or the wiring diagram to correctly identify which terminals to test.
Turn on your multimeter and set it to the "Ohms" setting.
Touch the multimeter probes to the appropriate terminals and check for continuity.
If the start relay is defective, replace it using the instructions below. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
