Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Latch Specifications
If your dishwasher won’t start or the door won’t close properly, the latch assembly might need replacing. This part helps keep the door securely shut and includes a switch that stops the dishwasher from running when the door is open. It’s easy to install, but make sure to unplug your dishwasher before starting the repair for safety.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Will Not Start | Door won’t close | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Crosley, Kenmore.
Part# 5304525218 replaces these:
154543901, 154722401, 154758101, 5304516818, 5304527418
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Jairo T - July 17, 2024
Verified Purchase
Worked!
Good parts and service.
Stacy U - August 23, 2024
Verified Purchase
Easy repair!
This part was exactly what I needed, replacing it was easy and my dishwasher door is closing perfectly once again!
Patricia P - December 20, 2024
Verified Purchase
Great part and Easy repair - dishwasher back working again
The parts arrived quickly and in good condition. With a little help from Youtube, we had the part in and the diswasher working again. I wish that I had done this sooner! No need to be afraid of doing it myself.
Heather L - May 15, 2025
Verified Purchase
Arrived quickly, simple to install!
I don’t usually leave reviews but I had already tried to purchase this part elsewhere and found it was incorrectly labelled, so I was a little wary of ordering it again. Luckily this was exactly what we needed, and it arrived within two days!
Darren H - March 24, 2023
Verified Purchase
Dish washer
The part was easy to find on the site and was delivered in a few days. The part fit and works great. Very happy with partselect
Gail W - August 9, 2023
Verified Purchase
EASY BREEZY!
Easy to order, arrived quickly, great price! Dishwasher is back in action!!!!!
Mike F - November 8, 2023
Verified Purchase
Part seemed to work great
The issue was the dishwasher stopping mid cycle, as if someone pulled it open. Replacing this part, it completes the cycle every time
Kade-Ann H - January 2, 2024
Verified Purchase
Easy repair
Great description and details.
Ed M - August 26, 2023
Verified Purchase
broken latch
The part accompanied by the instructions worked perfectly
Francis B - August 28, 2023
Verified Purchase
Great part
Original part, great price, fast shipping
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 11 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Appliance read out "err", would not go on
It would sometimes work, which led me to believe it was a switch. Looked on line and found the mail switch to go on was in the latch. I took it apart, 6 screws, wiggled the switch and it went on. So I found the door switch to be bad. It was very simple to change the switch.
Other Parts Used:
-
Rick from Ozark, MO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
38 of 71 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch assembly broken, Dw will not shut off upon door opening.
Remove Phillips head screws on inner part of door panel. Pull door cover up and remove face panel. Remove torx head screws from inner side of door and remove control panel. Remove two torx screws retaining door latch mechanism. Remove and replace two wiring harnesses from old latch to new latch noting polarity. I tall new latch using two original torx screws. Replace control panel and cover in reverse order. Test door latch function under any cycle. Washer should start with door closed and stop when opened
Other Parts Used:
-
Brian from NEW FAIRFIELD, CT
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door switch would not engage properly
Removed 6 screws from door front panel. Removed two wiring connectors and screws fromdoor latch Replaced and all is great
Other Parts Used:
-
carol from CHAPEL HILL, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Son ripped open dishwasher while running and wouldn't close
Replace the latch. Got to cut off old latch, trim wires, install latch, and put on the dishwasher door cover back on with screws
Other Parts Used:
-
DANIEL from BRADENTON, FL
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not latch
Removed 6 torx headed screw (loosens the internal control panel) and 2 philips headed screws(allows for front door panel removal). 2 torx screws had to be removed from existing latch along with 2 plugs loosened, be aware of how the plugs were connected to the latch. Do the reverse; attach plugs to new latch and reattach latch with the 2 torx headed screws. The 6 torx screws reattach the control panel and the 2 philips screws reattach the front door panel (be sure the front door panel is properly aligned prior to installation of the philips screws).
Other Parts Used:
-
Gary from LITTLETON, CO
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
.Latch broke
Latch broke. and it wouldn't run without locking. As a trucker's wife it's up to me to fix whatever breaks or do without. I took apart the door, noticed the model number, and ordered the part. it was easy., it was harder to go thru Thanksgiving and wash dishes by hand.
Other Parts Used:
-
Adrienne from LAKE ALFRED, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch would not latch, would not power on due to this
Seriously very easy. Took screws from side of door on inside of washer, silver cover plate came off and was simple to replace the latch using torque screwdriver and phillips screwdriver.
Other Parts Used:
-
David from EASTPOINTE, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water did not drain. Found the door latch broken
Unplug dishwasher. Open the door. Remove two Phillips head screws holding the door panel on. Slide door panel down and out to remove. With door still open, remove the six T20 torque screws that hold the control panel. Behind the control is the latch assembly. Take a picture of the wires going into the latch assembly for installation reference(mine was black wires on left and white wires on right). Unplug the two sets of wires. Remove two T20 torque screws that hold the latch. Replace with new latch and reverse steps for installation.
Other Parts Used:
-
Casey from Keota, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door wasn’t locking
You tube video and it was so easy less than 20min had it fix
Other Parts Used:
-
Michael from FAIRHAVEN, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher latch
Removed screws for door panel, then literally 2 screws to change out the latch!!
Other Parts Used:
-
scott from Hastings, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ROGER
February 20, 2023
My dishwasher will not light up or start after it is closed
For model number LFID2426TF5A
Hi Roger, thank you for your inquiry. First, you need to check the door latch, part number PS16218716, because the door latch makes sure that the door is securely shut. When it malfunctions, your dishwasher won’t work properly. If it is fine, then you may need to check the dishwasher user interface control button assembly, part number PS12585991. We hope this sorts out your problem!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Brenda
May 24, 2024
Er is all that will come on.
For model number FGID2466QF7A
Hi Brenda, thank you for reaching out. The Er code means that the touch control panel is shorting out on the dishwasher. We would suggest checking the wire harness first. If it is fine, the issue could be with the user control and display board, part number PS12585690. You may need to replace it to fix the issue. We hope this solves your problem!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Lynne
January 23, 2025
Will the door latch fit my dishwasher? I have an IKEA dishwasher #804621671A
For model number 804621671A
Hello Lynne, Thank you for writing. The Latch for this model is listed as PartSelect #: PS16218716. We hope this helps with the repair!
Was this helpful?
Thank you for voting!
Terry
August 8, 2025
What is the part number and is it available, for the door to allow it to operate?
I am having problems locating it.
For model number FMB330RGC0
Hello Terry, thank you for getting in touch. You will need to check the door latch, part number PS17219598, and the door hinge, part number PS1765448. If they are broken, loose or damaged, replace them to fix the issue. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
BILLIE
July 16, 2023
keep says code cd
For model number fgid2466qf4a
Hello Billie, thank you for reaching out. The error code CD means that the dishwasher does not think the door is shut. If you have opened and closed the door firmly and you still get the error, your door latch assembly, part number PS16218716, needs to be replaced. There are switches built into the latch and they are not sending a good signal to the main control board to tell it that the door is shut, so even if the door is closing properly, the dishwasher will not run. We hope this information helps!
Was this helpful?
Thank you for voting!
Raul
May 12, 2024
Door Lach do not release when the cycle ends
For model number FGID2466QF6A
Hello Raul, thank you for your inquiry. According to our understanding, the issue is most probably with the door latch, part number PS16218716. You may need to replace it to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Anthony
September 3, 2022
The connector s that where connected to door latch look burned up how do I fix this
For model number FFID2426TD0A
Hello Anthony, Thank you for your inquiry. The connectors would be part of the wiring harness PS11703843. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
John
January 31, 2023
Would this latch (#530425218) be compatible with my Electrolux dishwasher (Model #FFID2426TS5A)?
For model number FFID2426TS5A
Hello John, We are glad you asked! Yes, the Latch PS16218716 you had chosen is compatible with your model. We are pleased to have been able to help.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16218716
Manufacturer Part Number: 5304525218
Manufacturer Part Number: 5304525218
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST