Product Description
Tub Wear Pad - Grey - Kit of 2 Specifications
This part includes 2 tub wear pads.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not dispensing water
This part works with the following products:
Refrigerator.
This part works with the following products:
KitchenAid, Jenn-Air, Whirlpool.
Part# W10133606 replaces these:
AP4264725, 2305306AS, 2305306MN, 2305307AS, 2305307MN, W10133606
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Saiful I - October 26, 2018
Verified Purchase
Worked as expected
It would have been even better if there was a picture of the part on the website
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice and water pads hard to use and ice kept spurting out
Remove ice drip tray to expose two phillips screws.
Remove screws
Pull out slightly and push up to detach at top. Move carefully to the right and expose electrics. Disconnect white connector carefully pushing on tab . Disconnect two pads black connectors in similar manner.
Remove ice maker panel. Remove pads from back by carefully pushing on tabs use a small flat head srew driver to push gently down and up and away from panel. Remove wire from white tape . Install the new pads by the reverse of removal. Carefully make sure wires are not pinched in electric unit on water side. Reconnect small black connectors and white power connector. Reinstall panel and insert screws. Replace ice drip tray. Viola complete
Remove screws
Pull out slightly and push up to detach at top. Move carefully to the right and expose electrics. Disconnect white connector carefully pushing on tab . Disconnect two pads black connectors in similar manner.
Remove ice maker panel. Remove pads from back by carefully pushing on tabs use a small flat head srew driver to push gently down and up and away from panel. Remove wire from white tape . Install the new pads by the reverse of removal. Carefully make sure wires are not pinched in electric unit on water side. Reconnect small black connectors and white power connector. Reinstall panel and insert screws. Replace ice drip tray. Viola complete
Other Parts Used:
-
W from MARLBOROUGH, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ted
July 20, 2017
Does this also include wiring harness for ice dispenser pad?
For model number kscs25ftbl02
Hello Ted, that's a great question. These pads come with the wiring harness attached, which allows for easy installation. I hope this helps, good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
December 17, 2017
My water dispenser pad is loosing sensitivity. I only need that part w harness. Is that part sold seperately. Printed on the part: Fsp 2305307, mx p/n 122490008. Ps. It has water printed on outside.
For model number KSCS25FVSS03
Hi James,
Thank you for your question. Unfortunately those two pads come in this kit. They are not sold separately. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Scott
February 6, 2018
My ice pad has lost some sensitivity. Will replacing the pad correct that? Also, your part replacements show only pairs of black or white pads, mine is dark grey to match the "faux" stainless silver. Is are those pads available?
For model number KSCS25FVMK01
Hello Scott, thank you for your question. Replacing the pad will fix that issue. Unfortunately, the only colors available are white and black. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
February 11, 2020
What is the process to replace the w10133606 dispenser actuator pad. Are there instructions?
For model number W10133606
Hello John,
Thank you for your question. You will need to remove the front dispenser panel to be able to replace the actuator pad. You should be able to slide it off if there are no screws visible on the front or behind by using a flat edge screwdriver. We hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1560388
Manufacturer Part Number: W10133606
Manufacturer Part Number: W10133606
Brand
Model Number
Description