Part Location Diagram of 318178110 Frigidaire Radiant Element with Limiter - 1200W
See part 15A in the diagram
Replacing your Frigidaire Range Radiant Element with Limiter - 1200W
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Radiant Element with Limiter - 1200W

★★★★★
★★★★★
10 Reviews
$215.92
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS1528719
Manufacturer Part Number 318178110
Manufactured by Frigidaire
Part Videos

Replacing your Frigidaire Range Radiant Element with Limiter - 1200W

Replacing your Frigidaire Range Radiant Element with Limiter - 1200W
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Range, Wall Oven, Cooktop.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Crosley.
Part# 318178110 replaces these:
AP3960308, 1197487, 316010200, 316010203, 316010205, 316049600, 318050100, 318050402, 318178100, 318198830, 318198846, 5303297141, 5303305099, 5303311189, 7318178110, 7318198830, 7318198846
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.8
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 4 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
burned out burner
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Other Parts Used:
  • Lori from Winter Haven, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
65 of 83 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner knob post busted off....and burner element burned out
My husband opened the oven door.He removed the metal strip at the top just under where the knobs are.I held the top of the stove up while he unscrewed the 2 screws on either side of where the knob goes and he unplugged the connectors on the switch assembly one at a time a reconnected the new ones. We slid the post through the hole and lined up the two holes put the screws back in. Walah. I cont. holding up stove he got a socket to unscrew the strip holding the back elements in place. He undid just the one side used pliers to squeeze clamp together pushed the little post through the slot....unplugged the connectors keeping track of them. He used a screwdriver to unscrew clamps to screw them onto the new element at the same number as he took them off the old element. We popped the new element back in hooking up all connectors poked the little clamp posts through the holes attached the screw that is the strip holding elements in place. We closed the stovetop We lined the metal strip up at top of oven door underneath the knobs and put the 4 screws back in and closed the door. Done. I would say it took maybe 30 min.if that. Works like a champ.
Other Parts Used:
SWITCH
  • Terri from Seabeck, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
18 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 elements stopped working.
My husband followed the video instructions and it was easy to fix.
Other Parts Used:
  • Ruth from MORGANTOWN, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old element coil burned apart breaking the circuit.
removed the old burner and put the new one in it's place.
Other Parts Used:
  • James from WARRENTON, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

26 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
March 12, 2018
Heating element right ft. Sm element will not heat up at all, do i need to replace the LG element as well, can you tell the parts i need, please, thank you, joan
For model number FEFL79GBA
PartSelect logo
Hello Joan, Thank you for your inquiry. The right front heating element is a dual element, and the part number you would need to replace is 316464901. Hope this helps!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Jeff
May 28, 2019
Little to no heat when baking or broiling. The oven probe, broiler element, and bake element have been replaced.
For model number 790.92803015
PartSelect logo
Hello Jeff, thank you for inquiring. For this symptom you will want to replace the Electronic Control Board part PS3504421.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Leslie
March 15, 2018
How can i test to ensure it is intact the heating element and not a wire that needs to be replaced.
For model number FEF366LSB
PartSelect logo
Hi Leslie, Thank you for your question. To verify why the surface burner element is not heating, you will need to check both the element and the burner switch with a multimeter to see which part is causing the issue. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Michael
January 21, 2019
We installed a new eye on the stove and it won't cut off
For model number LGEF3045KFK
PartSelect logo
Hello Michael, Thank you for the question. This should like the wires may have been installed incorrectly. I suggest checking the wiring to make sure it is correct and secure. Thank you for your inquiry, good luck with this repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Lynda
March 7, 2019
Top don't heat up, would something be wrong with all the burners? And when I cut the oven on took a while to get to 350, is because of the top not heating up?
For model number LGEF3045KFC
PartSelect logo
Hello Lynda, Thank you for the question. Since there is no one part that controls all the elements on the cooktop, I suggest checking the wiring. Faulty wiring can also effect the oven. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Sonia
March 29, 2019
Will this part work in a Kenmore stove with model # 790.95411104
For model number 790.95411104
PartSelect logo
Hello Sonia, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS436590. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Joanna
May 9, 2019
The right front event which is the biggest one won’t heat. What part do i need?
For model number CGEF3055MFD
PartSelect logo
Hi Joanna, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Rabiaa
September 17, 2019
I'm looking for this part please if you have a let me know
PartSelect logo
Hello Rabiaa, Thank you for the question. According to the availability on the site the element is showing to be in stock. If you need assistance placing an order, please contact us at 1-877-910-4611 and we will be happy to help you. Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
April
October 16, 2019
Electrolux cew30ef6gsc wont heat and the buttons on the top panel wont turn on.
For model number CEW30EF6GSC
PartSelect logo
Hello April, thank you for your question. If the unit will not heat, the issue would be with either the control panel Part #: PS2339294 or one of the electronic control boards. If the top elements will not work but the oven works the board that controls the switches would have to be replaced. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Phil
February 25, 2020
There is no model# on the back of the stove . The service data sheets reference p/n 316259136(0108) + 316255121 rev a about 15yrs old with 4 burners + a warming zone . The front 2 do not heat up / the left says bridge element - the right says expandable element.
For model number Fridgidaire Gallery electric glass top range
PartSelect logo
Hi Phil, Thank you for your question. Before we can assist you further, we would need the model number from your range. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Range-Model-Number.aspx. We hope this helps. Thank you and have a great day.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
;
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1528719
Manufacturer Part Number: 318178110
Brand
Model Number
Description
Frigidaire
00462048A
Range - Range
Frigidaire
00462048B
Range - Range
Frigidaire
00462048C
Range - Range
Frigidaire
00462048D
Range - Range
Frigidaire
20462052A
Range - Range
Frigidaire
20462052B
Range - Range
Frigidaire
20462052C
Range - Range
Tappan
31-3592-00-01
Range - Electric
Tappan
31-3592-23-01
Range - Electric
Tappan
31-4592-00-01
Range - Free Standing, Electric
Tappan
31-4592-00-02
Range - Free Standing, Electric
Tappan
31-4592-00-03
Range - Free Standing, Electric
Tappan
31-4592-23-01
Range - Free Standing, Electric
Tappan
31-4592-23-02
Range - Free Standing, Electric
Tappan
31-4592-23-03
Range - Free Standing, Electric
Tappan
31-4972-00-01
Range - Free Standing, Electric
Tappan
31-4972-00-02
Range - Free Standing, Electric
Tappan
31-5592-00-01
Range - Electric
Tappan
31-5592-00-02
Range - Electric
Tappan
31-5592-00-03
Range - Electric
Tappan
31-5592-00-04
Range - Electric
Tappan
31-5592-18-01
Range - Electric
Tappan
31-5592-18-02
Range - Electric
Tappan
31-5592-18-03
Range - Electric
Tappan
31-5592-18-04
Range - Electric
Tappan
31-5592-23-01
Range - Electric
Tappan
31-5592-23-02
Range - Electric
Tappan
31-5592-23-03
Range - Electric
Tappan
31-5592-23-04
Range - Electric
Frigidaire
40462051B
Range - Range
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service