This part aids in the spinning and agitating cycles. The length of the shaft on this part is 13". The seal/gaskets are NOT included.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Westinghouse.
Part# 134736400 replaces these:
AP3892125, 1191298, 08014910, 08027583, 131878401, 131878411, 134588801, 134612101, 3161176, 5304402091, 5308014910, 5308057579R, 8014906, 8014910, 8016602, 8027583, 8057579, F140716-000, F140716000, F141133-000
...
Show more
, F141133000, Q000199044
Show less
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
bearing and seal at top of transmission went bad causing oil from transmission to stain clothes
I removed front and top of washer to get acess to the tub. removed cap to tub along with inner tub and agitator. the hardest part is removing the springs on the bottom and tilt it forward to get tub out. removed belt, pulley and bolts holding transmission in place. reassemble using silicone grease on seals and washers. works great now
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ernie
June 27, 2019
What seal gasket kit do i need for the shaft on transmission 134736400? Mine is leaking oil near the drive pulley.
Hello Ernie, thank you for writing. We will need the model number for the unit the Transmission Assembly is for to locate the associated parts for it. We look forward to hearing back from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Federico
February 10, 2020
Hola :Tengo una lavadora marca Frigidaire modelo ftw3011kw que tiene una transmisión modelo 134736400 ¿¿¿¿ me puedes decir el número de parte del retén superior y del retén inferior de esta transmisión y si ustedes lo venden??? muchas gracias y saludos.
For model number FTW3011KW
Hello and thank you for writing.
The transmission PS1524606 is in the list of compatible parts for your model, it only comes as the full assembly as shown in the diagram. We hope this helps. Please contact us anytime if you require further assistance.
Hola y gracias por escribir.
La transmisión PS1524606 está en la lista de piezas compatibles para su modelo, solo viene como el conjunto completo como se muestra en el diagrama. Esperamos que esto ayude. Póngase en contacto con nosotros en cualquier momento si necesita más ayuda.
Hello William, Thank you for the question. Very sorry Frigidaire only sells the new transmission, they do not list a rebuild Kit. We hope this helps!
Was this helpful?
Thank you for voting!
Bernard
September 30, 2017
Washing machine would not agitate, spiin and pump water work. I remove belt from motor and pully, select small wash,water reach at small wash level and motor came on,i check spin while belt is off and motor work in both direction. I suspect that the problem is in the transmission,what's your take on the problem.
For model number FWS223RFS2
Hi Bernard,
Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the drive belt, the agitator drive block, the tension idler pulley, the tension spring, the agitator screw and the washer capacitor. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Lonnie
February 24, 2018
My transmission makes a schilling sound. Can you help?
Hello Lonnie,
Thanks for your question. If your unit is not agitating, it may be an issue with the agitator or its drive hub. If it will not spin either, check if the lid switch has continuity when the door is closed, and also ensure power is going to the motor during your cycles. If everything is checking out, then the transmission likely needs to be replaced.
I hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
