Part Location Diagram of WH43X10032 GE Agitator Coupling
See part 310 in the diagram
Replacing your General Electric Washer Agitator Coupling
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Agitator Coupling

 Fits your HSWP1000M4WW!
★★★★★
★★★★★
4 Reviews
$84.80
  Special Order
 Fits your HSWP1000M4WW!
PartSelect Number PS1482517
Manufacturer Part Number WH43X10032
Manufactured by GE
Product Description

Agitator Coupling Specifications

Bolt not included. This part connects the transmission drive shaft to the agitator base.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Washer Agitator Coupling

Replacing your General Electric Washer Agitator Coupling
Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH43X10032 replaces these:
AP3995059, 1264702
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 17 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Agitator will not spin
Agitator would not spin and it was going to cost me I've a hundred soars for someone to come and fix it. I looked on this sight and found out what I thought was the problem and ordered four parts to fix it. I was amazed because they came in two days later. I started withe coupling which was the cheapest part and instaled it and it fixed it to return the other parts I called the 800 number and they emailed me a return authorization and I sent it back so it cost me 15 dollars and five minutes to fix it.
Other Parts Used:
Agitator Screw - 1/4-20 MCH HXW 5/8 S V-Style Drive Belt
  • Jared from georgetown, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
52 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not agatating
pulled off cup on top of agataor. scrwed off nut. pulled off agatator. flipted up side down. took off agatator bell wich is on the bottom of the agator. sliped on bell. put agatator back on and scrwed on nut. dont reamber the size of the nut.sorry. put cap on and your done.
Other Parts Used:
  • pilar from covert, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
13 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fin Broke off the Agitator
My wife washed a washable mop head and somehow it managed to break one of the fins off the agitator. I ordered a new agitator, fabric softener dispenser, agitator coupling, and bolt. I figured since I had to replace the agitator I would replace everything. This was super simple and easy. I watched a few videos on getting the agitator off, some people said you may need to run some rope under it to get it off. Luckily mine popped right off. I grabbed both sides and gave it a good solid jerk straight up and it came right off. I used a 3/8 drive socket wrench and a 7/16 socket to remove the bolt from the agitator coupling. I installed the new coupling with a new bolt, lined up the agitator and snapped it right on. Popped in the new fabric softener dispenser and that was it. I may have spent a total of 10 minutes counting unpacking the new parts and carting the old ones out to the trash can replacing this. If you can operate a socket wrench or a new smart phone this is really a piece of cake.
Other Parts Used:
Dual Action Agitator Screw - 1/4-20 MCH HXW 5/8 S Fabric Softener Dispenser
  • Keith from STATESVILLE, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy while spinning
I dissasembled the machine and it took about 30 minutes. Orderd the parts recommended for noisy spinning. Reinstalled the new parts / changed all drum straps. Cleaned the drain drum and spin drum and after complete reassembly the washer is still noisy in agitation and spin cycle. The motor,transmission,counter weight,and drum look ok but there is still a reason why the machine is still noisy. Spent 120.00 dollars on parts so far but the drum and motor,transmission and counterweight are very expensive to replace. I am just going to keep using the machine until the washer fails to work anymore. I'm not going to put any more money in the washer. I will just buy a new one. It's not hard to dissasembled and reassemble the washer. I purchased the parts that was recommended to fix the washer but they were not the ones.The new parts did help like the tub seal but the bottom line is that the washer is still noisy. I watched your videos to work on the washer and there were no special instructions on disassembly and reassembly. Like always there must be more than i know to repair this washer. Thanks
Other Parts Used:
Dual Action Agitator Tub Seal Split Ring Screw - 1/4-20 MCH HXW 5/8 S Water Pressure Switch Hose Hub Washer Tub Bearing Tub Bearing Washer Tub Dampening Strap
  • Thomas from SELAH, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Agitation Spins OK
Followed your video instructions and removed agitator.Used 7/16 3/8 in socket wrench to remove bolt in the agitator coupling and replaced coupling. Put new bolt in and tightened. Installed Agitator.Works Great.
Other Parts Used:
  • Raymond from TRAVELERS RST, SC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower agitator, very loose and wobbly
Reached down into the washer bowl. Fingers on each side of the agitator base. Quick jolt up agitator popped out adjustable wrench took the bolt. Off of the agitator coupling removed coupling wire, brushed the gear slots installed a new coupling with both new bolt lined up, agitator slots pump, the new agitator on after lined up with a down force quick jolt, then installed the new fabric softener, part on top of agitator
Other Parts Used:
Agitator Cap - Short Dual Action Agitator Screw - 1/4-20 MCH HXW 5/8 S
  • jack from SANTA ANA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench (Adjustable)
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator free spins
This was one easy job and saved me money by doing it myself, First I unplugged the washer for safety, then I removed the Agitator by grabbing the base of the agitator with both hands and pulling up I set the agitator a side and removed the one bolt holding the agitator coupling in place. the replacement coupling was a little tight when I replaced it due to it being new, (make sure the coupling is fully seated before installing the bolt) reinstalled the agitator plugged the washer back in and tested repair worked flawlessly thanks partselect
Other Parts Used:
  • Darrell from CLARKESVILLE, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inner Tub Base Hub replacement
The tub base hub developed a large crack and spin started to make a large vibration. Agitator coupling was frozen, so I broke it by dremel, wedge (a minus driver) and a hammer. The hub nut was also frozen, so I cut two slits into the nut with dremel, then broke it into two with a wedge and a hammer. Once the hub nut was removed installing new parts was straightforward. Half year ago I replaced the timer and capacitor of this washer and together with this repair the total repair cost has now run up to $300. I think I should have bought a new washer half year ago but now that the repair has been done, I hope it will keep working for at least another 5 years. Otherwise I can't justify the $300 cost.
Other Parts Used:
Screw - 1/4-20 MCH HXW 5/8 S Inner Tub Base Hub Hub Nut Tub Dampening Strap
  • Tatsuhito from S HUNTINGTON, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not agitate
I paid over $100 several years ago to have this same repair done by an appliance repairman. I did it myself this time for less than $20. Definitely watch the installation video before you start. Remove agitator by pulling it up by its bottom flange (protect your face in case it pops off suddenly). Remove bolt holding agitator coupling onto the transmission shaft. Pull up on old coupling and remove it. Clean grooves on transmission shaft and then install new coupling over the shaft. Reinstall old bolt and the agitator following video instructions on lining up agitator on the coupling. Note: Standard Fedex Smartpost shipping took 6 days to go from Louisville, Kentucky to western North Carolina. If you're in a hurry it's worth it to pay for expedited shipping. Lots of dirty laundry piles up in a week!
Other Parts Used:
  • Douglas from ETOWAH, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer wouldn’t agitate.
Watched a how to video. Pulled the agitator. Determined that the agitator coupling was worn out. Matched the old agitator coupling to new replacement one. Ordered it. Pushed the new agitator coupling onto the fitting. Secured it with the old bolt. Replaced the agitator. Repaired.
Other Parts Used:
  • Deborah from MARIETTA, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Riley
March 4, 2018
Is there another reason why the agitator will not function other then the agitating coupling
For model number WDSR2120J8WW
PartSelect logo
Hi Riley, Thank you for your question. If the washer is not agitating, there are some other parts that you will need to check to see which ones are causing the issue. You will need to check the belt, the agitator, the inner tub base hub, the tub dampening straps, the transmission and brake assembly and the lid switch. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Angela
December 17, 2017
I am ordering: Partselect number ps1482517 Manufacturer part number wh43x10032 Manufactured by GE it does not come with a screw. What size screw do i need to order to complete the installation of the coupling? Thank you, angela
For model number WDSR2080D5WW
PartSelect logo
Hello Angela, Thank you for your inquiry. The bolt is part# WH02X10237 size 1/4-20 MCH HXW 5/8 S. Good Luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Ronnie
July 21, 2021
Will only fill and drain no agitate or spin but timer advances it seems like it drains for a long time even though its empty
For model number hswp1000m4ww
PartSelect logo
Hi Ronnie, Thank you for your question. If your washer will not agitate, there are some parts that you will need to check to see which one is causing the issue. You will need to check the dual action agitator, the agitator coupling, the drive belt and the lid switch. We hope this helps! Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tony
February 21, 2019
Have noticed plastic shavings on clothes after washing
For model number wwse5240go
PartSelect logo
Hello Tony, Thank you for contacting us. I suggest checking the following two parts: PS11736866 Agitator and PS1155105 Dual Water Inlet Valve. Sometimes these part can build up sediments that leave particles on clothing. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jay
May 22, 2019
My Amana washer does agatates but very slowly what could be the problem.
For model number Gtwp2000fww
PartSelect logo
Hello Jay, thank you for inquiring. For this symptom you will want to replace either the Agitator part PS11736866, the Agitator Coupling part PS1482517, or the 6-Rib Drive Belt part PS1482278. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mayra
December 8, 2019
Hello, My machine not wash and spin. I already change the timer. What could it be?Thanks
For model number WVSR1060G8WW
PartSelect logo
Hello Mayra, Thank you for the question. If the appliance is not agitating for the wash cycle and not spinning, I suggest checking the V-Style Drive Belt, PartSelect Number PS270803. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Ron
March 3, 2020
Is this part # wh43x10032 the coupler
For model number hswp1000m3ww
PartSelect logo
Hello Ron, Thank you for the question. Yes, this is the Agitator Coupling. We hope this helps.

Was this helpful?
Thank you for voting!
David
July 16, 2021
Leaks on agitation cycle, makes funny sound, makes loud noise on spin, and rubber burn smell with large loads.
For model number GTWN4250D0WS
PartSelect logo
Hello David, Thank you for the question. We suggest replacing the Tub Seal, PartSelect Number PS4704237. The main tub seal is located between the transmission and the outer tub. Its the primary water seal in the outer tub for the transmission-shaft. If your washer is leaking during the fill cycle, or at agitation time, your tub seal may need to be replaced. When the Seal is worn or damaged, it can also cause the appliance to make noise. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1482517
Manufacturer Part Number: WH43X10032
Brand
Model Number
Description
General Electric
57441DCWW
Washer
General Electric
57481DCWW
Washer
General Electric
57731H0WW
Washer
General Electric
57731H2WW
Washer
General Electric
57731H3WW
Washer
General Electric
57731H5WW
Washer
General Electric
57731H6WW
Washer
General Electric
57731H7WW
Washer
General Electric
57731H8WW
Washer
General Electric
57731H9WW
Washer
General Electric
57751H0WW
Washer
General Electric
57751H1WW
General Electric
57751H2WW
General Electric
57751H3WW
Washer
General Electric
EWA4600G0WW
Washer - Ge Washing Machine Ewa4600g0ww
General Electric
EWA5600G0WW
Washer
General Electric
EWA5600G1WW
Washer
General Electric
EWA5600G2WW
Washer
General Electric
EWA5600G3WW
Washer
General Electric
GBAN2800F0WW
Washer - WASHER
General Electric
GBSR3140H1WW
Washer
General Electric
GBSR3140H2WW
Washer
General Electric
GBSR3140H3WW
Washer
General Electric
GBSR3140H4WW
Washer
General Electric
GBSR3140H5WW
Washer
General Electric
GBSR3140H6WW
Washer
General Electric
GBSR3140H7WW
Washer
General Electric
GBSR3140H8WW
Washer
General Electric
GCAP1000M0WW
Washer
General Electric
GCAP1000M1WW
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service