Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Penny L - June 22, 2021
Verified Purchase
No complaints here!
It was the exact part we needed and it arrived quickly! Thanks!
★★★★★
★★★★★
Mike Y - April 21, 2020
Verified Purchase
Simple.
Simple repair done in seconds. Part came quickly.
★★★★★
★★★★★
Gordon B - June 24, 2019
Verified Purchase
Perfect
Replacing a cracked knob. Symptom was dryer would not start. Sensing no résistance when turning knob. Fast delivery. Fair price.
★★★★★
★★★★★
Valerie F - October 26, 2018
Verified Purchase
All good
Perfect
★★★★★
★★★★★
Joan M - October 11, 2018
Verified Purchase
Worked perfectly
Fit perfectly
★★★★★
★★★★★
Patsy J - October 4, 2018
Verified Purchase
Great part
Machine is working. Thanks.
★★★★★
★★★★★
Tessie O - August 31, 2018
Verified Purchase
Our Dryer is Working Again
The part I ordered was received in good condition. It came in the mail faster than expected. My dryer is in working condition again. Thanks for your help.
★★★★★
★★★★★
Bert V - August 28, 2018
Verified Purchase
Part worked well and installed easily!
The part that we ordered came on time. Installation went well and our dryer works great again.Thanks again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 57 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Timer knob cracked twice. Found out the timer switch was bad.
Removed the 3 knobs. They just pull off. Removed 6 screws on the back side of the control panel. The front (plastic panel then just separates from the back). Then look at how the switch is mounted on the plastic panel. There should be 2 small pieces of plastic that holds it in. Carefully twist the switch in the appropriate direction so it comes free. Before you remove any wires from the old switch remember what colors go where ! I used needle nose pliers to remove the connections from the switch. Make the new connections, mount the switch, put the screws back in the panel. BEFORE YOU DO ANYTHING. UNPLUG THE ELECTRICAL CORD !!!
It was so incredibly simple! The site made it foolproof to find the right parts - and the actual replacement job itself was easier than we ever could have imagined. Background: I love to do laundry - I mean A LOT! So - I use the washer and dryer every night to wash the familie's clothing and blankets and towels. After heavy use - the outer knob stripped out. We threw it away and were using pliers to turn the small plastic knob underneath. After a few months - that plastic wore down and we could not turn it on at all!
Timer knob cracked and would not turn on the dryer
Very easy. I just snapped the new timer knob on and I was ready to go.
Other Parts Used:
Kathleen from Greenwood, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
166 of 243 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace timer and knob
removed back panel, exchanged wires on old timer to new. Do this one at a time as there is no color chart to follow. Timer clips back in. Used a little screw to lock it in. Not sure if this was on the original but there was a place for it. Re-attached back panel and placed knob on shaft. Overall saved a bundle as a service visit is $175.
Timer knob broke (again) so we just used pair of pliers to set time for drying. This caused timer's plastic knob shaft to broke very quickly, so whole timer had to be replaced. I didn't have ANY experience with this but it was very simple. I disconnected power cable from the outlet. Using screwdriver removed back panel, then using pliers disconnected all wires from the old timer and connected them back to the new one. And that's it, dryer working like new.
Replaced timer switch, stem was stripped. Also found all 4 knobs cracked, which surprised me. . Unit only 2 years old, replaced them also. All repair done from top, removed top then control panel, popped knobs off, replced them. Working good now.
The timer switch was so hard to turn it broke the knob.
I pulled the dryer three feet from the wall. UN-PLUGGED THE UNIT!! Removed 3 screws from the very top of the dryer,and pulled 1 wire at a time from the old switch and put it on the new one. Super easy.
Ordered part from the make and model number on the inside of dryer. Unplugged and Took screws off the back panel. Unplugged all color of wires while remembering where they went. Put in new motor and put wire plugs back in place, then screwed back plate cover back in place. NOTE: It's like changing a fuse in your car. It was really easy!
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marge
July 20, 2017
When the cycle finishes my dryer will not automatically turn off anymore. Is there a problem with my timer knob or something? Never had this happen before!
Hello Marge, if the timer motor has power and the timer is still not turning off, you may need to replace the timer on your dryer WE4M353. This can be tested using a multi-meter tool. Please let us know if you have any further questions.
12 people found this helpful.
Was this helpful?
Thank you for voting!
Raymond
July 20, 2017
How do I know if I should replace the knob or the whole timer assembly. My wife said last time she used the dryer when she turned the timer it felt “weird” and now the machine is not starting. I read that usually it is bc of a faulty timer or timer knob but who can I determine which it is?
Hi Raymond, this problem could be caused by the knob or the timer on your dryer. I would start with the knob. Pull it off the shaft and check it for visible damage. If the knob is not the problem then you will need to inspect your dryer timer. I hope this helps.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
December 30, 2017
Hi. Is this a one directional (eg only to be turned clockwise) or a multi directional knob?
For model number Dbsr453eb2ww
Hello Jeff, Thank you for your inquiry. It is designed to turn with the timer switch, which is recommended only to turn clockwise. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Priya
July 20, 2017
I need this timer knob by the looks of it but it does not match the color of my unit. Does it come in other colors?
Hello Priya, this knob is also available in bisque. If that is the color you are looking for you can find it here WE1M483. Best of luck with this repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
March 1, 2018
The timer knob has no tension in it. I cannot make a timing selection as the dial spins freely, therefore the dryer will not work.
For model number HTDX100GM8WW
Hi Greg, Thank you for the question. If you can remove the knob and turn the shaft the knob fits onto and have it operate normally, you will need to replace the knob. If the shaft turns freely as well then the timer switch needs to be replaced, Part Number: PS9491767. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
January 16, 2018
Is this the right part no. Ps1482197
For model number DBSR463GG7WW
Hi Brian, Thank you for the question.Yes, This timer knob Part Number: PS1482197 is the correct timer knob for the model number provided. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
August 20, 2019
When on timed drying always stops at 40mins which is when the knob arrow is pointing straight down, I have tried replacing the timer itself twice with the same result. So either I wired it wrong, have the wrong timer. Does each knob have its own orientation? Anything you can think of?
For model number DLSR483GG1WW
Hello Ken, Thank you for the question. A dryer that shuts off mid cycle might mean that you have a defective motor. A defective motor will run a lot hotter than usual and will cause it to overload. When the motor becomes too hot it will shut off to cool down which would cause your dryer to shut off. I suggest testing the motor. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Christopher
August 20, 2019
Trying to find a timer knob for a GE dryer that has a metal insert for the above dryer model number
For model number GTDP180ED0WW
Hello Christopher, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8769912. Hope this helps!
I need to replace the timer knob and woul like to know if there this would work.Thanks
For model number DBSR463EG6WW
Hello April, thank you for your question. Yes, the timer knob PartSelect Number: PS1482197 will work for your unit. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Maureen
January 2, 2019
The knob on my dryer broke off and the d-shaped shaft is down to the nub. I don’t see where I can order both the knob and the shaft? Also, how do I repair this? Help?
For model number Dwsr405gboww
Hello Maureen, Thank you for the question. The shaft is only made and sold as part of the timer switch, Part Number: PS267931. The knob is Part Number: PS1482197. Hope this helps, good luck with this repair!
