This OEM Timer Knob is a white plastic knob which can be easily installed onto your machine's timer rod, in order to control the timer. If the part breaks off, it should be replaced. Refer to your user manual and model number to see if this part is right for you. It is a three-inch-diameter part that accepts a D-shaped shaft. To replace your faulty knob, simply pull the existing knob straight off the shaft and install the replacement back onto the shaft. No tools are required. This item is sold individually and is not part of a set. The timer knob contains the insert as well as the knob itself.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Timer Not Working | Won’t Start
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint.
Part# WE1M652 replaces these:
AP3995164, 1264289
Customer Reviews
Average Rating:
★★★★★
★★★★★
18 Reviews
4.8
Filter By Rating:
5 Stars
17
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Linda C - December 7, 2023
Verified Purchase
Dryer knob replacement part
I couldn't believe how lucky I was to find this part online. After months of using a pair of pliers to turn on my dryer I noticed some #'s where the knob should be. After entering the correct one I came up with some websites to choose. I chose partselect.ca and was very happy I did. They had the part in stock and ordering it online was a breeze. The order was filled and shipped within a week. My husband was surprised and happy when I received the part. It fits perfectly! I totally recommend partselect.ca to anyone needing appliance replacement parts.
★★★★★
★★★★★
Bill H - August 29, 2023
Verified Purchase
Quick repair . . .
Probably the easiest and quickest repair I've done.
★★★★★
★★★★★
Namir S - November 22, 2022
Verified Purchase
Fast delivery. Easy repair.
The order was for Timer Knob for Hotpoint dryer. The replacement part is identical to the original and required less than 15 seconds to install. The dryer, which is over 15 years old, is back to normal operation. Without this part I would have had to jerry-rig something or may be buy a new dryer. Thank you very much for providing this service.
★★★★★
★★★★★
Krista S - September 30, 2022
Verified Purchase
Dryer timer knob
Perfect match.
★★★★★
★★★★★
Rose Marie I - July 29, 2022
Verified Purchase
Part does not work
The part that was advertised as being the correct one does not fit; sending it back will cost too much so it was a total loss.
September 18, 2022
Thank you for your review. We're sorry to hear that happened, we will be in touch soon to help fix this issue.
★★★★★
★★★★★
Rolf S - June 10, 2022
Verified Purchase
Checked the part number got the right part number
Checked the part number got the right part number. Simple to order. It was just a knob after all
★★★★★
★★★★★
Janet V - May 27, 2022
Verified Purchase
Easy Repair, Speedy Delivery
I live in a rural area with no appliance repair near by. Watched the online video determined what part (timer knob) I needed and ordered it! It arrived very fast. I am so impressed with PartSelect and I am telling everyone about this company. Keep up the great work!
★★★★★
★★★★★
Don G - April 27, 2022
Verified Purchase
Easy
Easy to find the part, quick deliver.
★★★★★
★★★★★
Harm M - March 24, 2022
Verified Purchase
Good dryer knob
Exactly what I ordered, fits like a glove, good price, good delivery experience, overall 5 out of 5, thank you!
★★★★★
★★★★★
Steve M - March 1, 2022
Verified Purchase
Worked fine!
Worked as advertised
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 32 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
the knob broke and my daughter tried turning the end of the knob with a pliers which broke the end which disabled the timer.
I unscrewed the back panel took out the broken timer replaced it with new timer put on the new knob and screwed the panel back on.
The knob and timer knob broke, which disabled our dryer from working.
The replacement parts arrived and fit perfectly onto the metal part. It was super easy and now my Dryer is working again. I am so happy I saved myself from buying a new Dryer. My old one is as good as new!
I did a search on your site to find out why dryer wouldn't start. It said 25 % of the time it could be the timer knob. Checked my old one sure enough it was cracked.Took old timer knob off and pushed New one back on less than a minute. Thank you for your site. It saved me from costly repairs.
Other Parts Used:
Kenneth from OCALA, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
27 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My dryer knob broke.
I simply removed the small black piece and inserted the new knob and it was ready to work. It was so easy and I am very happy. I though I was going to need a repairman but I was able to do it myself. Also, the ordering and delivery was fast and easy!!!!
Other Parts Used:
Zelda from MARIETTA, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
16 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer would not run. The knob was cracked and the little piece inside was broke. Had to use pliers to run 2 loads.
My husband took top off back and went in that way and it was simple to fix. Thank youi
I just pulled off the old knob and put on the new one. Took 10 seconds. I did not need the D-Shaped knob insert clip after all.so glad i found this website.
From behind the dryer remove the panel directly behind the timer assembly (6 phillips head screws). Take a picture at this point of how the wires are attached to the timer assembly for reference during reassembly Then remove wires with pliers. Remove T10 Torx screw that retains the timer assembly in place. Remove timer Knob (pull forward). Rotate timer assembly to pop it out. From here, twist in new timer, use T10 torx to hold in place re-attach wires and reinstall rear panel
The timer knob was stripped, so it was stuck in the off position. Ordered the "D"-shaped knob and just placed it on the connector and everything is working find.
Other Parts Used:
Sonya from COLUMBUS, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Problem turning the washer on and changing cycles
Removed the 4 screws holding the panel in place. Then removed the 3 screws holding the control asm in place. Removed 1 connector at a time installing the connector into the new assembly. Secured the controls asm with 3 screws. Then put the panel back on with 4 screws.
Ask our experts a question about this part and we'll get back to you as soon as possible!
54 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Theo
July 20, 2017
I’m looking for the timer knob AND the insert, does this part come with both if I purchase? Or do I need to get the other piece separately, pls advise
Hi Theo, you are in luck, it does have the insert in it. If you order this timer knob WE1M652 you will not need to order anything else to make this repair. I hope this helps!
49 people found this helpful.
Was this helpful?
Thank you for voting!
Jackie
July 20, 2017
Hi there, my timer knob on my dryer keeps breaking/cracking/snapping off and Im not sure if it’s a poorly made part or if im not installing it right or if theres something else wrong with my machine. In the past two years I replaced it 2X and this will be a third time. What do you think……?
Hi Jackie, by the sounds of things your timer knob is sticking and you should replace it and the timer together. This part WE1M654 is the knob and this part WE4M533 is the timer you require for your model. Best of luck with this repair!
28 people found this helpful.
Was this helpful?
Thank you for voting!
Gabbie
July 20, 2017
My dryer is not starting and according to your site a “common problem” is the timer knob …. How will I know this is the problem?
Hello Gabbie, great question! You should check your timer knob for visible damage such as cracks and excessive wear. If there is damage present, that is likely your problem and the knob WE1M652 should be replaced. Please let us know if you have any further questions!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
August 27, 2017
Timer knob has crack where it attaches to shaft is this part the right one?
For model number HTDX100EM8WW
Hi Mike,
Thank you for your inquiry. Yes, this is the correct timer knob for your appliance. Good luck with your repair.
14 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
January 14, 2018
Hi what is the part number for the timer knob for this model. Htdx100ed6ww
For model number Htdx100ed6ww
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS1482196. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Juanito Garlitos
March 21, 2019
The knob for the timer cracked so the timer won't work. I replaced the knob three times already because it keeps on cracking. We used pliers to turn the stick that holds the knob and now the stick broke too but still can be grasped by the plier. What needs to be replaced at this time and which parts do we need. Is it easy to replace the parts?Thank you.
For model number DWSR483GG7WW
Hello Juanito, thank you for your question. You will want to change the timer and the timer knob. The timer is PartSelect Number: PS9493080 and the knob is PartSelect Number: PS1482197. Please enter the part number into the site for current price and availability. Good luck with your repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Philip
August 16, 2017
I need a new timing knob for this model. I can't to find one.
For model number HTDX100GD6WW
Hi Philip,
Thank you for your inquiry. According to your model information, this would be the correct timer knob for your appliance. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Eve
March 8, 2018
My old knob cracked. I replaced it with we1m654, but now the drying time is off kilter. It cuts off last of before the off spot. It is a GE dryer. Is this the correct part?
For model number GDTX180ED4ww
Hello Eve, thank you for your question. The knob part that you ordered, part number we1m654 is not the right timer knob for your appliance. That is why the timer knob is off kilter. The part you need to order for the timer knob replacement for your model number is WE01X20374. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Terry
March 21, 2018
Does this knob fit my dryer
For model number HTDX100GM8UU
Hello Terry, thank you for your question. Yes, Timer Knob WE1M652 is an exact replacement for the timer knob on your specific appliance. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Debbie
February 5, 2019
What are the color cordinance on the timer control? I have red yellow orange and white wires on tge machine and a b c and x on the control box.
For model number Htdx100ed4ww
Hello Debbie, thank you for your question. On the timer you'll want to connect yellow to X, white to T, red to B, orange to A and brown to C. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
