Part Location Diagram of 316538904 Frigidaire Light Bulb
See part 4 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Light Bulb

★★★★★
★★★★★
7 Reviews
$25.16
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS12751166
Manufacturer Part Number 316538904
Manufactured by Frigidaire
Product Description

Light Bulb Specifications

Clear, 120 Volt, 40 Watt.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator, Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
Frigidaire, Kenmore, Tappan, Gibson.
Part# 316538904 replaces these:
08002735, 08037649, 08068090, 171840, 173421, 218926201, 2386-1, 240436701, 240436702, 241529103, 241552901, 241555401, 28078, 3001179, 3001180, 3013071, 3018801, 3051082, 3051513, 316538901 ... Show more , 31956, 3201908, 3202007, 3205941, 37400050001, 374L001P01, 374L002P01, 374T012R01, 374T018P01, 374T018P04, 374T018P05, 374T020P01, 374T025P01, 5300063749, 5303001179, 5303013071, 5303051082, 5303208582, 5303285989, 5304406549, 5304448955, 55771, 7241555401, 732132000@, 75303013071, 8002735, 8006-19, 8006-38-4, 8006-38-7, 8037649, 8063-2, 8068090, 8529, AP067007, C000501851, F002009-000, F4-21, F51461, F73317, FA2009, G10424, G165723, G185162, G25806, G28087, G28178, G30055, G39122, G54494, K1027373, K1027374, K1081270, K1101291, K1134642, K1135453, K1137227, K1144690, K1168823, K1186186, K1227370, M1088506, M1088822, M1090078, P067007, P067018, Q000007422, Q000007428, Q000023556, Q000063746, Q000063749, Q000198580, Q63749, QM000009D1, R000900925, T1506945, T357165, WC501851, WC501868 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.4
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 11 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Ice-Maker and Water Dispenser not working.
First I disconnected the power cord, then removed the screws that held the bracket that holds the base for the water-filer in place. I then disconnected the water lines(intake and outflow). Next I removed the screws that held the water-filter's base in place. I then disconnected the release lock mechanism for the filter and finally removed the water-filter base. I did the reverse to install the new water-filter base. Previously I had tested the intake water line and noticed the water was flowing with enough pressure upto the water-filter's base but no water was exiting thru the outflow line, which leads to the Ice-Maker and Dispenser. I had tried changing the filter but that didn't solve the problem it was then I had realized that the Base was the problem. The actual problem was the spring-loaded valves for both the intake and outflow lines, which had a plastic prong that protrudes out of the base that is triggered by the filter when installed. The two prongs were worn-down so the filter wasn't activating the spring-loaded release valve to let the water thru. As for the light, I just unscrewed it.
Other Parts Used:
Water Filter Base Refrigerator Water Filter
  • Colin from Hollis, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
180 of 291 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Ice or water through the door
Shut water off, removed back cardboard panel from fridge, disconnect water supply to valve, disconnect electrical plugs to water valve, removed defective valve, cut flexible copper supply tubing as connector was different, connect electrical plugs to new valve, install supplied compression nut & ring onto cut flexible copper supply tubing & re-connect water supply to new inlet valve, attach water inlet valve to fridge frame with supplied screw and added additional self tapping screw through second mounting hole into fridge frame to keep valve from shifting.
Other Parts Used:
Water Inlet Valve Kit
  • Jay from Franklin, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench set
44 of 61 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
crisper drawer supports broke
The parts supplied were made to fit. The hardest part was getting the original broken tabs out of the internal walls of the fridge with out damaging the internal insulation. I punched the center locking pin through completely, dug out the broken tabs and then reached into the hole with a dental pick and pulled out the center pin. The new parts fit perfectly and with a plastic mallet, tapped the new locking pin into place.
Other Parts Used:
Crisper Support - Rear
  • Timothy C. from Aberdeen, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
20 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Housing Assembly froze and split causing leakage; original support studs broke
Filter housing assembly removes easily. Two screws removed prior to removing water connections. Replace water connections prior to screwing new assembly into place. Original support studes were old and shattered - easy to remove (careful not to crack the side wall of the fridge when trying to remove). Ensure pin is removed from new support studs prior to installing on side. Once in place, insert pins flush to ensure studs in place.
Other Parts Used:
Filter Cup and Housing Assembly Crisper Support - Rear
  • Jeffery from Raleigh, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven light bulb went dark; it needed replacing
Twisted replacement bulb into place easily. Let there be light!
Other Parts Used:
  • Lise from CEDAR GROVE, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
9 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven temperature ran very high
When the part arrived, I open the box. Cut off my breaker to the range. Pulled back the stove and unscrewed the back. Located the probe, unscrewed the one screw that held it in. I then unclamped the white connectors, remove the old probe, replaced it with the new one reclamped the connectors. Screwed it back into the range. Replaced the back and screwed that back together. It was so easy I was very proud of my self. I cut the breaker back on and cooked a can of biscuits just to see if it really worked. And it did. My bread was not burned, it was cooked to perfection.
Other Parts Used:
Temperature Sensor
  • Juliette from BRINKLEY, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator Light bulb went out
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Other Parts Used:
  • ANGELA from MEBANE, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Repaired Oven Range Light Bulb
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Other Parts Used:
  • Alan from SAN MATEO, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven temp runaway tempreture, oven light out, sensor was changed for temp drifting low
The light and sensor were straight forward and easy. The EOC was as well but there was one glitch. You have to also purchase the black panel overlay, you cannot use the old one. While the adhesive will still adhere, the keypad is different and REQUIRES the new cover. This would have been good to know when I ordered parts as I did not know until I got the three parts and had to reorder the overlay creating a weeks delay in it's repair.
Other Parts Used:
Oven Electric Control Board Temperature Sensor
  • Kenneth from LIBERTY, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light bilb went out
replaced it
Other Parts Used:
  • Denise from Landover, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

7 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeannette
August 26, 2021
How do you change the light bulb in the oven
PartSelect logo
Hello Jeannette, Thank you for the question. The bulb for this model just unscrews like a regular Bulb. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Rose
December 5, 2021
Need a light bulb for a Frigidaire refrigerator.
For model number FRT17G4B
PartSelect logo
Hello, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12751166. This Bulb is also used in some Oven, but will work in your refrigerator. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Brandon
September 27, 2022
Will this bulb work with an Electrolux fridge model number LFTR1821TFA?
PartSelect logo
Hello Brandon, thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is part number PS12751166. If you would like assistance placing an order, please contact customer service. Good luck with your repair!

Was this helpful?
Thank you for voting!
Ray
December 20, 2022
The light in my fridge went out. Will this light bulb work for my fridge? Thanks.
For model number ffht1826lk2
PartSelect logo
Hello Ray, thank you for your inquiry. According to our research, this light bulb, part number PS12751166, will fit your model. It illuminates the interior of the unit. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
William
November 23, 2021
I have replaced the bulb in the refrigerator but the light does not come on i.e. light
For model number LFTR1814LB9
PartSelect logo
Hello William, Thank you for the question. We suggest testing the Light Socket and the Door Light Switch for continuity and make sure all the wires are secure. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Antoinette
October 13, 2023
I just need to remove the lens cover first I hope this is the correct bulb I can't see it
For model number FGB24S5DCC
PartSelect logo
Hi Antoinette, thank you for contacting us. Yes, you may need to remove the lens cover first before replacing the bulb. Also, the part you are referring to is the correct bulb for your model. Let us know if you have further questions!

Was this helpful?
Thank you for voting!
Al
December 20, 2023
What type of light bulb do I need for the l7ght at the water dispenser panel
For model number FFSS2614QS2A
PartSelect logo
Hi Al, Thank you for your question. You will need an LED light bulb, part number PS12705447, the dispenser. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
;
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12751166
Manufacturer Part Number: 316538904
Brand
Model Number
Description
Frigidaire
00462048A
Range - Range
Frigidaire
00462048B
Range - Range
Frigidaire
00462048C
Range - Range
Frigidaire
00462048D
Range - Range
Tappan
11-1153-00-04
Wall Oven - Electric
Tappan
11-1153-23-04
Wall Oven - Electric
Tappan
11-1153-45-04
Wall Oven - Electric
Tappan
11-1153-57-04
Wall Oven - Electric
Tappan
11-1153-66-04
Wall Oven - Electric
Tappan
11-1159-00-01
Wall Oven - Built-in, Electric, Wall
Tappan
11-1159-00-02
Wall Oven - Built-in, Electric, Wall
Tappan
11-1159-00-03
Wall Oven - Built-in, Electric, Wall
Tappan
11-1159-00-04
Wall Oven - Built-in, Electric, Wall
Tappan
11-1159-00-05
Wall Oven - Built-in, Electric, Wall
Tappan
11-1553-00-04
Wall Oven - Electric
Tappan
11-1553-23-04
Wall Oven - Electric
Tappan
11-1553-45-04
Wall Oven - Electric
Tappan
11-1553-57-04
Wall Oven - Electric
Tappan
11-1553-66-04
Wall Oven - Electric
Tappan
11-1559-00-01
Wall Oven - Built-in, Electric, Wall
Tappan
11-1559-00-02
Wall Oven - Built-in, Electric, Wall
Tappan
11-1559-00-03
Wall Oven - Built-in, Electric, Wall
Tappan
11-1559-00-04
Wall Oven - Built-in, Electric, Wall
Tappan
11-1559-00-05
Wall Oven - Built-in, Electric, Wall
Tappan
11-1653-00-04
Wall Oven - Electric
Tappan
11-1653-23-04
Wall Oven - Electric
Tappan
11-1653-45-04
Wall Oven - Electric
Tappan
11-1653-57-04
Wall Oven - Electric
Tappan
11-1653-66-04
Wall Oven - Electric
Tappan
11-1969-00-01
Wall Oven - Built-in, Electric, Wall
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service