Product Description
ROLLER ASSEMBLY Specifications
The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter. This part includes tri-lock rings and shaft.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer, Washer Dryer Combo, Washer.
This part works with the following products:
LG, Kenmore, General Electric.
Part# 4581EL2002H replaces these:
4581EL2002D, 4581EL3001A, 4581EL3001E
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Jeff R - April 29, 2022
Verified Purchase
Dryer Repair
Call in support was fantastic. Together we identified the correct parts. Parts arrived in a couple days as expected and with all the correct parts. Dryer is back in business thanks to the Team at PartSelect
Jim P - February 25, 2022
Verified Purchase
Worked perfect
Part was great. Fit perfect. Unfortunately, the circuit board died shortly afterwards rendering my fix irrelevant.
Christina H - November 12, 2021
Verified Purchase
Fit perfectly
Looked different than the original part but worked perfectly and easy to install.
Brad S - September 23, 2021
Verified Purchase
The right parts , fantastic phone service by one of your east coast operators,Joanne , the best experience I could hope for!
All parts needed were included. Arrived the next business day.
Craig&Amy K - June 22, 2021
Verified Purchase
Roller repair with updated part.
I needed to order another roller/axle from parts select,as the other one I preferred did not come with the axle as stated. Much better with sealed roller bearings instead of a greased bushing. Ensure it comes with a new axle for the updated roller as the original roller axle is much larger in diameter and is not compatible.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 9 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Screeching during operation
Found disassembly video and watched several times. Suspected that one of the drum wheels had seized up. Found extreme volume of lint and hair inside unit as well as a dryer sheet melted on top of heating unit. Front left drum wheel was worn down from lint and hair jamming its movement. Video made it easy, not a really complicated piece of machinery. Replaced all 4 wheels due to normal wear on other three. Wanted to be sure drum evenly balanced on all 4. Parts came quickly and were easy to install. My sister and I did this together. Would not recommend doing it alone. Took time to vac and wipe down entire unit. Now it runs so quiet we have to look to see if it is operating. Got a brand new machine out of it, saved a couple of hundred dollars in repair bills, and found 11 cents inside the machine. For your own piece of mind, if you have had your dryer for several years, you need to open it up and clean it out. Its not hard... added note, we are both in our 60's... so if we can do it so can you.... Such a feeling of accomplishment, can't buy that in a store....
Other Parts Used:
-
CAROL from NAMPA, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
31 of 41 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LG dryer making loud noise (older model)
I followed a Repair Clinic Urube video except the video had a model with the controls in front and my dryer has the controls on a back panel. The difference was in how to get the top of the dryer off after removing all the screws. The video
said to push back on the top panel which did not work because of the back controls. Instead I had to push up on the front to release it and then push back. The rollers were also in a slightly different place but were easily found and replaced. The dryer is now back to normal.
said to push back on the top panel which did not work because of the back controls. Instead I had to push up on the front to release it and then push back. The rollers were also in a slightly different place but were easily found and replaced. The dryer is now back to normal.
Other Parts Used:
-
Darline from DREXEL, MO
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
10 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum roller seized up
Handed the parts to my son-in-law he's very mechanically inclined had the job done in 20 minutes
Other Parts Used:
-
chet from WIMAUMA, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
8 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace 4 roller bearings.
Following the reference video, step by step and taking progress photos along the way, organizing screws and hardware as they were removed.
The discrepancy I found was the new rollers that I received were complete with the shaft. The video with the older rollers instruct removing the rollers from the shaft.
To use the new rollers with the new shaft, requires removing an additional panel at both the front 2 and also the full back panel for the rear 2, to get a wrench on both ends of the shaft, and then attach the new roller bearing shaft assembly and re-install the panel.
Other than that, it went very smoothly and the result was a quiet rotating drum. No more thumping!
My dryer actually required 2 moisture sensors, but had only ordered one pack, which only came with 1 sensor. For whatever reason, I thought the pack would have had the 2 pieces.
Another reviewer made note to wear work gloves as some of the hardwares metal edges are quite sharp. Following that advice I completed the repair in 3 hours without a scratch. Thanks for the detailed video Partselect team and good luck to all attempting repairs.
The discrepancy I found was the new rollers that I received were complete with the shaft. The video with the older rollers instruct removing the rollers from the shaft.
To use the new rollers with the new shaft, requires removing an additional panel at both the front 2 and also the full back panel for the rear 2, to get a wrench on both ends of the shaft, and then attach the new roller bearing shaft assembly and re-install the panel.
Other than that, it went very smoothly and the result was a quiet rotating drum. No more thumping!
My dryer actually required 2 moisture sensors, but had only ordered one pack, which only came with 1 sensor. For whatever reason, I thought the pack would have had the 2 pieces.
Another reviewer made note to wear work gloves as some of the hardwares metal edges are quite sharp. Following that advice I completed the repair in 3 hours without a scratch. Thanks for the detailed video Partselect team and good luck to all attempting repairs.
Other Parts Used:
-
ed from NATICK, MA
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frozen up roller on rear of dryer
Removed top of dryer
I carefully removed wires from back of control panel
Removed control panel
Most of screws hold cabinet together
Unhook wire from light on door and sensor on the front panel.
Remove the front door and panel together
I changed both front rollers on front panel
If you have to change rear rollers lift tub up by belt
Remove screws on back of dryer that will let you lift out inside rear panel that holds the rear rollers
Change rollers and just revearse procedure to put back together
I carefully removed wires from back of control panel
Removed control panel
Most of screws hold cabinet together
Unhook wire from light on door and sensor on the front panel.
Remove the front door and panel together
I changed both front rollers on front panel
If you have to change rear rollers lift tub up by belt
Remove screws on back of dryer that will let you lift out inside rear panel that holds the rear rollers
Change rollers and just revearse procedure to put back together
Other Parts Used:
-
Joseph from PIQUA, OH
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was making a terrible sound.
An appliance repairman determined the problem which was that it needed new pulleys and thankfully PartSelect carried them. He installed them in an hour and my dryer runs fine now.
Other Parts Used:
-
NANCY from ATASCADERO, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer quit spinning
One of the roller assembly froze up & had a flat spot on it. There for causing the drum not to rotate. Pulled it out replaced the roller & up & running.
Other Parts Used:
-
Peggy from San Bernardino, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud rumbling noise
Followed video provided on site
Other Parts Used:
-
Michael from RIVERSIDE, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thumping sound when dryer is on.
I took the top off, I disattached the front and took the front top of dryer off, taking the front of dryer off, detached the belt and took the drum out, found the wheels took the plastic triangle off and took the wheels off and replaced wheels, then did everything in reverse and no more thumping. just remember to unplug unit before working on it. And also Part Select is a very good site and place to get parts, very fair priced and very professional.
Other Parts Used:
-
Frank from Whittier, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
August 19, 2021
Are you aware that for less than this price i can get a set of 4 rollers, a new belt, a pully and a spring in amazon, delivered in two days and including free returns?I want to support businesses other than amazon, but it is difficult to do. my experience with amazon products is not so much worse to justify a 400% increase in price.
Hi John,
Thank you for contacting us. We apologize that our prices are not as low as you expected. We base our prices on what we are charged by the manufacturer for the parts. We try to keep our prices as low as possible but we do also have to keep them at a level to help cover our costs. We hope this helps to explain the reasoning behind our prices.
27 people found this helpful.
Was this helpful?
Thank you for voting!
Elijah
July 28, 2021
How many rollers comes with the set
For model number Dlex3370w
Hello Elijah, Thank you for the question. The Roller Assembly includes one roller, On Roller Shaft and mounting clips. We hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
November 8, 2021
Need to replace rollers. I bought part number 4581el2002a. The part I ordered has a bolt in the middle which is smaller then the one on the dryer. Is this wheel compatible. Can I just use the wheel and not replace the bolt.
For model number dlgx2502v
Hello Robert, Thank you for your inquiry. We have researched the model number you have provided and show this is the one listed as compatible. The roller and shaft come as a complete assembly but you can remove the plastic tri-ring and just use the wheel. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ryan
December 17, 2021
I am looking for just the tri ring to secure the drum rollers - is that an option
For model number DLG2141W
Hi Ryan,
Thank you for your question. The tri-rings are not listed in the parts list for your dryer and you will need to purchase the roller assembly. The part number listed under your model number for the roller assembly is PS12749664. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
February 15, 2024
Does the roller assembly come with the "Tri Ring"? Doesn't sound like it does. If it doesn't can you let me know what the Part # is? I can't seem to find it in the diagram or parts list. Thank you!
For model number DLEX7177WM
Hello Chris, thank you for the question. According to our research, the tri-ring comes with the roller assembly you mentioned. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
January 31, 2022
is a kit 1 roller or 4 rollers? (k251 in diagram)
For model number dlg5988w
Hello Keith, thank you for your question. This roller assembly includes the roller shaft and mounting clips. We hope this helps. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tom
March 22, 2022
Should there be two rollers? We only got one.
For model number DLGX5102W
Hello Tom, thank you for your question. This part is sold individually. We hope this helps.
Was this helpful?
Thank you for voting!
Brooks
June 25, 2022
Filter for drying
For model number LG
Hello Brooks, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the dryer. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12749664
Manufacturer Part Number: 4581EL2002H
Manufacturer Part Number: 4581EL2002H
Brand
Model Number
Description