Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert J - February 25, 2024
Verified Purchase
Correct part, no instructions.
Was the exact part I needed. However, installation instructions would have been nice. I figured it out eventually after a couple of hours, but knowing what I know now, I could do it again in 5 min.
★★★★★
★★★★★
Alex D - August 28, 2022
Verified Purchase
Exact replacement
Prompt delivery
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
spraying water from the connection on top of fridge
just like the video showed, removed the cover parts inside the fridge, disconnected the water tube inside and pulled out from the top of fridge, then inserted new water tube.
Other Parts Used:
Jenny from PHOENIX, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
12 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Herminio
January 17, 2022
Ice maker not getting water?
For model number WRF550CDHZ02
Hello Herminio, Thank you for the question. We suggest checking the Water Lines to the Ice Maker to make sure they are not froze over preventing the water from passing through. If the Line is clear, We suggest testing the Water Valve. Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Steve, Thank you for writing. This could be an indication the Water tank tubing assembly with water filter head, PartSelect Number PS12712108 where the filter locks in is worn or damaged and needs to be replaced. Thank you for the question!
the funnel on top of the ice maker along with the water inlet tube continue to freeze up in about a week after thawing everything out.
what part do you recommend I should replace
Thank you
For model number WRF555SDFZ08
Hello Ron, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the evaporator fan motor, part number PS16555213, to solve the problem. We hope that helps!
How do I remove the WATER HOSE from the VALVE? The VALVE does not have a NUT or THREADS to attach the WATER HOSE. I an sorry to have confuse with wrong numbers before.
For model number GI6SARYXFOO
Hello Bob, thank you for your inquiry. Based on our research, the valve has compression-type tubing on it, so we need to press it on the collar and the tubing will pull out. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Rudy
August 10, 2023
Hello, I recently replaced my water inlet valve because I had a leak. The tubing had calcium buildup and so I ordered the valve. However, now the tube will not seat into the new valve. I think the issue may have been the tubing all along. That said, can I cut the tubing and try to get a better/cleaner part of the tube to see if I can get it to seal properly? Or, should I replace the tube altogether? What about a splice with a push connect union? I'm looking for options.
For model number GI6SDRXXY02
Hello Rudy, thank you for asking. Based on the understanding of the issue, we would recommend replacing the water tube, part number PS12745424, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Sandra
January 30, 2023
spraying water from the connection on top of fridge
For model number GI5FVAXVL01
Hello Sandra, Thank you for your inquiry. There could be a crack in the tube or spout and if that is the case, we would recommend replacing it. Good luck with your repair.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12745424
Manufacturer Part Number: W11415785
