This part is a replacement electronic clock/timer for your oven. The clock timer will display the time, and can be used to set a timer. If the clock will not start, will not allow you to program the time or timer, or if the touchpad does not respond at all, you may need to replace the clock. As you will be working around electricity for this repair, be sure to disconnect power from the oven before you begin. This part is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Touchpad does not respond | Will not program | Little to no heat when baking
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Alan D - September 1, 2021
Verified Purchase
Repair of control board.
Part was in great condition when received. One feedback it took over a week to get it, should be able to be overnight shipping. We were without a stove for a week. I would have paid more for overnight delivery.
★★★★★
★★★★★
Bill L - February 19, 2021
Verified Purchase
Oven not working for over 3 years.
My dad's oven hasn't worked in over 3 years. An appliance repair person said it would cost $700.00 in parts & labour to fix but recommended to buy a new stove. Plus they couldn't guarantee finding the part. They also didn't say which part was needed but after some research, I was able to figure out that they were referring to the Control Board of the oven. In the past, I found the Friction Sleeve part for my own dishwasher from PartSelect & thought I would try finding the Control Board for my dad's oven. I was lucky to find the Control Board using the model number of the oven & received the new part 2 weeks later. I installed the new Control Board within 30 minutes & now my dad has a working oven. Saved him about $400.00 for repairs or the cost of a new stove, which would have been $1200.00
★★★★★
★★★★★
Theresa M - January 8, 2021
Verified Purchase
Easy to change
Website was easy to use and order part came quickly and was accurate and easy to change
★★★★★
★★★★★
Donald F - October 20, 2020
Verified Purchase
Repair part
fit like a glove and got it really quick
★★★★★
★★★★★
Jim P - May 8, 2019
Verified Purchase
Exactly as I ordered - worked great
The part arrived quicker than expected, took 3 minute to replace, and works perfect. Saved me from spending much more money. Thank you.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 10 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
We had a transformer go out in our block and made a surge which blew out the electronic oven control
The repair of the oven was really easy . I removed a total of 7 screws with a 1/4 inch nut driver to remove the back cover of the instrument panel. I then unplugged the wires from the from the oven control and with a phillups screw driver I removed 4 screws that hold the oven control,the face plate with the words on it has to be taken off the old control and put on the new one . I then installed the new oven control by putting the 4 screws back on and plugging back the wires. I then replaced the back cover with the 7 screws and plugged the power back in the outlet, The clock has to be adjusted and your done.
Other Parts Used:
Alberto from Houston, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
86 of 98 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The clock unit went out so the oven could not work.
The screws had to be removed to take top off stove back and remove the unit. New unit was put in place and screws put back in.
Other Parts Used:
Carol from Newberry Springs, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
31 of 36 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would work sporadicly, while baking
Removed back plate from range. Removed the clock/timer from range. (note), a special square headed screwdriver needed to remove this unit. I had to use the old clock/timer face. This required careful removal of the face from old unit. Plugged in new unit and refastened it . Turned on range and checked all functions, everything worked fine. Probably save at least one hundred dollars by doing it myself. Will probably use Parts Select for any otaher work I do in the future. Ron
Other Parts Used:
Ronald from Altoona, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
28 of 33 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clock/timer panel failed
My brother swaped the panels out in 15 minutes after pulling range out from the wall to get at the attachment screws/speed nuts. Only minor problem was re-gluing the trim cover on to the new part.
Other Parts Used:
Nels from Montgomery, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
20 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F 10 code OvenClock/Timer
After watching video on YouTube. It was very easy. I remove 6 screws from back panel then disconnect wires from clock removed 4 screws from clock. Replace new Clock put 4 screws.6 screw on panel. Plug in Gas Range. Job completed.
I followed the instructions given pretty much, however none of them mentioned one important point.To remove the cover plate, do NOT try to pry it away from the unit. It will crack. Fortunately I caught it in time.I then started in another corner by inserting a razor knife between the face plate and unit and sliding it around all four sides. There was enough goo left on the plate to enable me to affix it to the new unit.
Other Parts Used:
Karl from HIGHWOOD, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clock or oven didn't work
Repair went well. I went on You Tube and was able to watch what to do. That was better than reading instructions.
Other Parts Used:
Marjorie from WILLARDS, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem
My daughter did the installation and it was quick. She had no problem, and it's working great. She love it. She just use a philp screwdriver to take off the bolt then unplug the control adaptor. From the back then plug the new one in and that's it. Easy as 123
Other Parts Used:
Pamela from DETROIT, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Code f10
Easy installation using a nut driver and a Phillip screwdriver.plug in harness connector and done.
Other Parts Used:
bennie from san francisco, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter did not light.
The electric was the next step it worked.
Other Parts Used:
marcus from hot springs, AR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carl
December 27, 2019
Does the control board come with face plate or do you order 2nd
For model number 5304518661
Good Day Carl. Thank you for your question in regards to your unit. The control board (PartSelect Number PS12717913) has been discontinued by the manufacturer and we no longer have any remaining in our inventory. The Panel (PartSelect Number PS2581824) has been discontinued by the manufacturer and we no longer have any remaining in our inventory. We would recommend reaching out to the manufacturer as they may be able to advise of alternative parts that would be compatible with your unit. The Overlay (PartSelect Number PS12114508) is still available at this time and can be ordered either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
5 people found this helpful.
Was this helpful?
Thank you for voting!
David
July 5, 2021
This part is for the Frigidaire stove I'm trying to replace the back panel but the picture I am seeing here on ur sight is correct but missing the 2 black one white relays as well as the 6 connecting cords. Does ur picture just not show it.
Hello David, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Allison
November 5, 2021
The electronic display works for the clock and ignites the pilot but the oven will not light when you enter the two. Will this part correct the problem?
For model number Lfgf3014lwc
Hello Allison, thank you for your question. We have researched the model you have provided, and we would suggest the Oven Burner Igniter, part number PS12071409. We hope this helps!
This appliance takes too long for to start is this right?
For model number FGF337GCF
Hello George, Thank you for your inquiry. We would also recommend checking the temperature sensor, the igniter and the safety valve. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
Clock is just blinking and won't keep time. Oven won't come on.
For model number CRG3150PBC
Hello Fred, thank you for reaching out. It seems that the electronic clock is damaged and needs to be replaced. The part number for the electronic control is PS12717913. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Shelly
January 30, 2023
The burners work. The clock works. It has a brand new igniter. The oven nor broiler will come on. The igniter isn't lighting.
For model number FGF348KCN
Hello Shelly, thank you for reaching out. The issue seems to be with the Spark Module and you may need to replace it, the part number is PS11775689. If that does not help, we would suggest checking the Control Board, part number PS12717913. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
