Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Graham H - September 1, 2022
Verified Purchase
This part was perfect to fix the problem!
Super fast shipping! Arrived when it was scheduled and fixed the problem. Easy installation, works like it should.
★★★★★
★★★★★
Michelle C - October 25, 2018
Verified Purchase
Easy fix
Parts came super fast. Repair was easy and fridge is running better than ever!
★★★★★
★★★★★
Dean V - October 17, 2018
Verified Purchase
Pretty easy repair
I changed out the part fairly quickly and it seems to have fixed my issue.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.4 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
freezer icing up no cold air circulation to refrigerator
unplugged the unit pulled it away from the wall removed the lower panel removed the drain installed the new replacement . removed the wiring harness and replaced it with the new one replaced the panel and plugged back in
Defrost cycle not kicking in. Refrigerator not cooling. Freezer working.
I replaced the control board first. The freezer back panel frosted up and the refrigerator warmed up again. Then I force (short option vs long) defrosted the refrigerator. However, a few days later the defrost issue came back again. Force defrost no longer worked, though likely due to a severe ice build up behind the freezer panel. I ordered the wire harness. I took off the freezer door (loosen four screws only), removed the tray rails, ice maker, thermostat housing and vent mounted on the freezer panel. The rails and the vent are a bit tricky to remove since no directions exist. I then removed the fan above the coils and then removed the wire harness. Installing the new harness is easy except that I had to modify one of the ground connections for it to mount properly. I tested the unit for 72 hours. The defrost cycle eventually kicked in (dripping onto a pan and sizzling sound). I then reinstalled all parts. No frost build up. Good to go!
Other Parts Used:
Brian from DUVALL, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Olivia
May 20, 2019
I ordered the wire harness part no.W11260592. I watched the installation video on your website before i ordered the harness. When i click on installation instructions on the harness order page it does not play. Now i received the part no. And want to install it i cannot find the video. Where do i find it. Please let me know how to access it. Thank you.
For model number 59669932011
Hi Olivia, thank you for your question. Unfortunately we do not have an installation video for this part, so it may not have been something that you saw on our site. You may have been looking at a general video? We actually have a lot at our YouTube channel. There is this one here: https://www.youtube.com/watch?v=KB8k6VzE294. However if you want to take a look at a list you can view that here: https://www.youtube.com/user/partselect/search?query=fridge+wiring. Good luck with your repair.
Was this helpful?
Thank you for voting!
Adam
December 16, 2023
Evap coil is freezing up and not defrosting. I forced a defrost and the element is heating and defrosting the coil. I would like to test the freezer thermostat how to do it but it has no values printed on it and is built into the wire harness. I can cut it out of the harness and repair but without cut in and out values i am not sure how to test. I dont want to throw parts such as a harness and new board. I want to narrow it down. Thanks
For model number kenmore 596.69313010
Hi Adam, thank you for getting in touch. In order to check the defrost thermostat for the continuity. Set your multitester to the ohms setting. Place each of the multitester's leads on a thermostat wire. When your thermostat is cold, it should produce a reading of zero on your multitester. If it is warm, anywhere from forty to ninety degrees Fahrenheit, then this test should produce a reading of infinity. If the results you receive from your test differ from the ones presented here, then the defrost thermostat may be faulty. We would suggest replacing the defrost thermostat to fix the issue. It does not come separately. It comes along with the wire harness, part number PS12584385. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
