This lid is for washers.
The lid covers the washer tub opening.
Wear work gloves to protect your hands when installing this part.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Whirlpool.
Part# W11259006 replaces these:
W10714900, W10843976, W11082608, W11094984
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken lid frame at left hinge.
Raised lid to remove two Torx head screws from each hinge. Lid will then lift off of hinges. Installation of new lid was the reverse of the removal procedure. It is best to install one hinge to the lid by removing that hinge from the washer. The lid can then be installed by inserting that hinge into it's spot and then over the other hinge. Install the hinge screws into the second hinge and the job is complete. The lid now closes properly allowing the automatic lid lock to function properly.
Other Parts Used:
Greg from RICHMOND, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
25 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid was broken at the hinge and would not stay closed
Removed the old lid by removing the two screws on both sides of the lid holding it to the hinge. Then pull upon the lid to remove. Slide the new lid back on the hinges being careful to slide in the right slot in the lid. Replace the screws through the lid into the hinges and your done
Other Parts Used:
Gary from GLADE VALLEY, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
15 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
26 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
December 23, 2019
Can you tell me if the replacement lid for this washer is glass?
For model number MVWB865GW0
Hi Tom, thank you for your question. Yes, the lid for this appliance is glass. Good luck with your repair.
17 people found this helpful.
Was this helpful?
Thank you for voting!
Peggy
January 13, 2020
I need to order the lid to this model washer. Does it come with installations instructions?
For model number MVWB835DW3
Hello Peggy,
Thank you for your question. There should be two wire hinges and screws on the back corners of the lid, once you remove those you should be able to remove the lid and attach the new lid the same way. We hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Christina
August 18, 2021
Is this the correct lid for my Maytag mvwb835dw4 washing machine?
For model number MVWB835DW4
Hi Christina,
Thank you for your question. Yes, this would be the correct lid for your washer. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Allan
November 11, 2021
Does this lid fit the Maytag washer model number above
For model number MVWB765FW3
Hello Allan, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12584356. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Tom And Eva
August 13, 2021
What is the correct part number to replace the lid for this washer. The plastic inside has broken at the left hinge area and will not close and lock and start cycle?
For model number MVWB835DW
Hello Tom and Eva,
Thank you for your question. The part number listed under your model number for the lid is PS12584356. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Debbie
September 4, 2019
Is this a glass lid?
For model number MVWB835DW0
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12584356 for the Glass Lid. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Danielle
October 27, 2021
What is the correct part number for replacement lid to my washer?
For model number MVWB865GW0
Hi Danielle,
Thank you for your question. The part number listed under your model number for the washer lid is PS12584356. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doris
May 9, 2022
What is the correct part number to replace the lid for this washer. The plastic inside has broken at the left hinge area and will not close and lock and start cycle? model number MVWB835DW5 , SN CX0770164
For model number MVWB835DW5
Hello Doris, Thank you for your inquiry. We have researched the model number that you have provided and the lid is part# PS12584356. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rey
May 5, 2023
How do you remove the hinge assembly from the top lid. I removed the 4 star screws but it is not coming out. The pins at the corners do not come out. Thanks
For model number MVWB865GW0
Hello Rey, thank you for reaching out. According to our research, the four screws go into the holes in the two hinges. After removing the screws, just lift the lid up and it will slide up and out easily. If this is not the case, then you may need to pry up the lid with a little force or you may try to get the lid free from one side first by lifting it up and getting it free from the hinge. Once the lid is out, just slide out the hinges and insert new hinges in the holes. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Angel
January 27, 2022
Hi, what size torx bit will I need to replace my washer lid W11259006? It is t15 screws correct? Thanks!
For model number MVWB865GW0
Hello Angel, Thank you for your questions. The Screw for the lid is # 7 PartSelect Number PS12741703. It is a Phillips Head. We hope to hear from you soon.
