Unplug any appliance before any work is done. The microwave is a hanging unit under kitchen cabinets. First I removed the turn table, rollers, and connector by lifting them out. Second I removed all the attaching Phillips head screws that hold the bottom cover on. Once removed the cover will hang and give access to the drive motor gear assembly. It's held in place by 2 torques head screws. Remove these, lower the motor, and disconnect the 2 wires that plug onto it. A small pick or similar tool is needed to release the connectors latches. reassemble in reverse.
glass turntable broke in half, ring turn needed replaced
I removed the broken tray and ring-turn and replaced it with the new Service was fantastic, parts were ordered one day and received the next
Other Parts Used:
Gail from Cincinnati, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave didn't have support ring when house was purchased.
Removed turntable Place support ring in track Place turntable on support ring. Easy, peasy!
Other Parts Used:
Leon C from MEDFORD, OR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old coupling melted and the tray cracked in half.
It took me 15 minutes total - 5 minutes to clean the microwave, 1 minute to install three new parts, and 9 minutes to enjoy my celebratory glass of wine!
Very unusual. we had a brief fire inside the microwave which destroyed all the moving rotary parts.
First, we had to clean up all the interior surfaces, which was just cleaning. There was no internal damage. Then, just setting the center connector, rotary rollers and glass plate. Simple
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rona
April 28, 2023
Before ordering I want to be sure this will work for my model. Pls advise.
For model number UMV1160CW
Hi Rona,
Glad to hear from you. Yes, this would be the correct turntable ring for your microwave. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Freddie
May 15, 2023
I need glass replacement plate for whirlpool microwave model # mh1140xmq-3
For model number 0231895
Hi Freddie, thank you for reaching out. The part you are looking for is a glass cooking tray, part number PS373741. We hope this helps!
Is this the correct turntable for my whirlpool microwave?
For model number YWML 75011hw-3
Hello Susan, thank you for reaching out. The part you mentioned is not a turntable, it is the turntable ring and is not compatible with your model. The glass tray support, part number PS12578307, and the glass tray, part number PS12711337, fits your model. We hope this information helps!
The ring turn looks different-color, etc. I searched by model number on my microwave and this is what came up. Just want to be sure before i spend 32.00 that its right. It looks like my ring lost its "cushion" on the rollers
For model number Wmh32519hb05
Hello Cindy, Thank you for your inquiry. We have researched the model number you have provided and show that this is the correct part for this model. We hope this helps.
Was this helpful?
Thank you for voting!
Victoria
June 15, 2022
I keep buying parts and returning them because they’re not correct. There’s not a practical way to find the part number needed. ?? What are the dimensions of this and the accompanying turntable? The one that I’m attempting to use now “sort of” fits but it’s too small and wobbly. If I had the correct base part, it should “theoretically” stabilize it. Please help. Confused mom who’s addicted to a microwave.
For model number Not sure.
Hi Victoria,
Thank you for your question. The turntable roller guide measures approximately 7-1/2 inches long.
For information on the correct turntable roller guide for your microwave, we would need the model number from it. We have included a link from our website that you may use to find the model number on it. If you could resubmit your question with this information, we would be happy to help you. We are open 7 days a week. We look forward to hearing from you!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12584163
Manufacturer Part Number: W11252182
