Average Repair Rating: 5.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lights in freezer were dim
This is regarding the top light in the freezer, Small screwdriver inserted into tabs on the right side of light pops it right out. Unplug and remove light. Plug in new light, snap into place DONE. Be sure to remove plastic film
Other Parts Used:
Neala from Tubac, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The main light in fridge short circuited and the LED lamps would not come on
Literally just unplugged the old light and removed three wire harnesses. Then installed the new light by reconnecting those three wire harnesses
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
November 19, 2018
On 3/22/18 i had the light in our refrig. /freezer replaced. The unit is only 2&1/12 years old. Now the light is out again. Do you suppose this is a problem with the led light or something else. The cost of the new light is expensive and not easily replaced. Thanks.
For model number wrs973cidm00
Hi Peter, thank you for your question. If nothing else is malfunctioning in your appliance, then it is likely that it is just the LED lights that are the issue. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
June 29, 2022
Kitchen Aid Side-by-side refrigerator, Model KRSC500ESS01: the LED light on the ceiling of the freezer compartment is burnt out and needs to be replaced. Your Part #PS12349553 (#12 on exploded diagram of Freezer Liner Parts; same part as #22 on exploded diagram of Refrigerator Liner Parts). My questions are: (1) How to remove the old burnt-out LED. In the freezer compartment, the LED is very close to the Air Duct (#3 on the exploded diagram of the Air Flow Parts) so there's no access on the side towards the Air Duct, and there's very little space between the other side of the LED and the edge of the liner. And (2) Is a special tool needed? Thanks
For model number KRSC500ESS01
Hello Robert, thank you for your question. While we do not have a video to access, one of the previous customers commented to say " just unplugged the old light and removed three wire harnesses. Then installed the new light by reconnecting those three wire harnesses" . We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.