This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Water Inlet Valve
Troubleshooting
This part fixes the following symptoms:
No hot or cold water | Leaking | Water Filling Issues
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kevin M - September 8, 2023
Verified Purchase
Perfect fit
Fast shipping quality piece worked great
★★★★★
★★★★★
Hector M - December 23, 2022
Verified Purchase
Water valve replacement
Quick and easy fix, 1st replacement only lasted 6 months but was replaced under warranty quickly and efficiently. Thanks
★★★★★
★★★★★
Hector M - June 9, 2022
Verified Purchase
Quick remove and replace 10 minutes
Part came one day. Awesome faster cheaper than Amazon. Great pictures and scale drawing made it so easy to get the right part . it’s for Washer that’s just out of warranty. Thanks
★★★★★
★★★★★
Dean D - July 13, 2022
Verified Purchase
Perfect fit
super fast and just what I needed
★★★★★
★★★★★
Marianne R - July 14, 2019
Verified Purchase
Easy Repair, Great part
part in good condition, how too videos on the website made the repair easy and the company was great to work with
★★★★★
★★★★★
Malay S - March 3, 2020
Verified Purchase
Fast shipping, good service.
It was the exact part needed. Replacement was easy and works great.
★★★★★
★★★★★
Piotr P - October 1, 2019
Verified Purchase
Good price!!
Fast and easy repair!!!
★★★★★
★★★★★
Linda I - October 24, 2019
Verified Purchase
Washer part
Fast delivery. Washer is all fixed.
★★★★★
★★★★★
Viviane C - January 4, 2021
Verified Purchase
Exactly the part required. Installing the replacement part was fast and easy.
The part was received with little shipping delay and in perfect condition. However, it was placed in a small box with no protective padding; and moved about freely! This part fortunately, was sturdy enough to survive the trip. Despite this shortfall, we would order again from PartSelect.
★★★★★
★★★★★
Jacques C - June 2, 2021
Verified Purchase
Great par4
My appliance is working fine
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 13 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water would not fill the washer except for 4 inches.
Once we put in the new Water Inlet Valve, the auto sensor works now and I can wash any size load
Other Parts Used:
Patricia from MURPHYSBORO, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
37 of 50 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No cold water
Cold and hot water valve .easy as pie.
Other Parts Used:
Greg from HAVELOCK, IA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer stuck on sensing
I have a Kenmore he 500 series washer that would not get out of the sensing mode. Googled the problem. It let me know it could be the water inlet valve. So I ordered the valve through Part select (mailed to me with in days of ordering) Had a towel and small bowl for nuts and screws. Shut off water to washer, disconnected hoses, used screwdriver and socket wrench to unscrew the back of washer (since it was my first time to ever do something like this on my own, I took pictures to make sure everything went back in place) replaced valve. It was an easy connection. Washer works great
Other Parts Used:
Rosemarie from LAS CRUCES, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cold & Hot water Valve Replacement
Turn off the water at both the cold and hot. May need an bucket to catch any water left in the lines. Then unplug the washer to kill power of course...Taking off the 10 or so small screws in the back metal cover will get you started. The tricky part is getting the clips off the back top where the knobs are. You will have 2 plastic clips and 2 metal clips, 1 on each side. Take a flat head and ease them up and out....careful not to break them! You can pull the whole control panel away from your work area. Once you have full accuses to the valves its self, it is held in by 2 screw on the top inside a slot. You can now unplug the pigtail harness. Repeat the process in reverse to get it back together and the job is complete. 30 to 45 minutes Max.
Other Parts Used:
Alex from SPRINGBORO, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer not filling with enough water
see you tube on how too
Other Parts Used:
Jon from LAS VEGAS, NV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace water inlet value
had to change out wiring harness was not compatible
Other Parts Used:
Norbert from PITTSBURGH, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
OEM water valve was allowing water to drip into the drum with no power to the valve.
Removed two 1/4” screws from the backside of control panel. Plastic putty knife slide under front of control panel to release the clips and allowing panel removal. Shut water supply off and removed both hot/cold hoses from valves. Removed the two T-20 screws which allowed the removal of the existing leaking valve assembly. Installed in reverse and it worked perfectly!!
Other Parts Used:
Scott from STILWELL, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water inlet valve on the cold side wasn’t allowing color water flow
I watched the video and for the most part the first part of the repair went well. I carefully stored the screws, but despite what the video suggested the part did NOT just slide out. Upon further inspection I discovered two small screws in the top of the valve housing affixing it to the machine. Since it was to narrow an are to use a driver I was forced to remove the housing that holds the timer, which involved removing the knob and a small screw. On each side of the housing was a metal clip and true to form I was able to loosen one side but the other the clip launched into orbit. After a thorough inspection of the floor I found said clip. I was then able to remove the housing and loosen the two screws. Of interest is the fact that the new part had molded places for screws different that the video. After that replacing everything went smoothly and I was able to hook up the washer as the repair was successful.
Other Parts Used:
Linda from Lebanon, VA
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cold water was not working
Was the video and I started everything fell into place. Thank you very much
Other Parts Used:
Richard from HOUMA, LA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer made high-pitched sounds during the filling stages.
Trying to follow the instructions according to the video was easy enough until the part where I had to remove the control panel for access to the screws holding the inlet valve. I don't have a putty knife, so I had a bit of trouble trying to remove the panel. I found another way. There are screws on the left and right sides which hold the control panel to the side pieces holding it to the body. If you remove the screws and use a pick or flathead screwdriver to carefully pull up on the tabs below the screws while gently pulling the control panel away, it will easily pop off with a rotational movement. The panel is centered into its location via two plastic pins molded into the side panels, so be aware of them and try to avoid breaking them. They'll help you get the panel properly positioned during reassembly, which is simple. You'll see all this easily if you take the time and look. Don't be in a rush. To reassemble, line up the panel with the plastic pins and rotate it into position. The tabs slide easily into position and lock the panel into place. Just don't forget to reinstall the screws. Removing the panel in this manner added a bit of time to the repair, but not a lot. It's still a fast repair overall. Everything else was exactly like in the video. Well, almost. I had no difficulty whatsoever with sliding the new valve into place. But once the job was done the sounds coming from the washer during the filling stages ceased. Turns out the screens in the inlet valve were getting stopped up with lime.
Other Parts Used:
Greg from GLASGOW, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
36 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
November 5, 2019
Hot water fills, but cold water runs about 10 seconds and stops the. The washer will try to start washing.
For model number RTW4516FW1
Hi Gary,
Thank you for your question. If the washer is not filling with cold water, you should check the water inlet valve to see if it is working correctly. The valve should be found directly behind the hose connections. Looking for signs of damage, cracking, or wear, visually inspect your washer’s valve. The valve has screens inside it that may have built up dirt or debris, if so, it should be carefully cleaned as if these screens become damaged, you will need to replace the entire valve.
The resistance of a properly functioning valve varies from model to model, refer to your owner’s manual to determine what the reading of your test should be. To test for continuity, place the probes onto the valve’s terminals with your multi-meter set to Rx1. If you do not receive a reading that indicates continuity, you will need a replacement water inlet valve. I would check the door lock as well. If this part is not working correctly, this will cause issues throughout the washer. Here is a link from our website on some other parts that you will need to check to see what may be causing the issue, https://www.partselect.com/Repair/Washer/No-Hot-Cold-Water/#Water%20Inlet%20Valve. I hope this helps. Thank you and have a great day!
28 people found this helpful.
Was this helpful?
Thank you for voting!
Martin
February 1, 2019
I am replacing the water inlet valve part # w10869799. How do i get the old one off
For model number WTW5000DW1
Hello Martin, Thank you for the question. Here is a link to a video that may help. The appliance mat not be %100 the same but should have the same basic steps. Hope this helps!
https://www.youtube.com/watch?v=hjiKQ9Ye58Q&t=3s
16 people found this helpful.
Was this helpful?
Thank you for voting!
Billie
July 16, 2019
Is it possible too buy the 2 little strainers that go inside of the water inlets
For model number Ntw4516fw0
Hello Billie, thank you for writing. Unfortunately they are only sold on this replacement Water Inlet Valve part PS12349267 for your model.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
August 6, 2019
Water will not shut off keeps running and floods the floor until turned off
For model number ntw4705ew0
Hello Larry, thank you for your question. If the water continues to flow when the plug is removed from the wall the water valve would need to be replaced. If it shuts off when the unit is unplugged the issue could be the valve, or water level pressure switch. I hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Lisa
December 19, 2019
When i wash in cold water it starts off filling with cold then stops and fill with hot.
For model number mvwc555d01
Hi Lisa, thank you for your question. The part to check first would be your water inlet valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is fine then the issue might actually be in your control board. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
August 6, 2019
The washing machine gets no hot water. Water supply and hoses/ screens good. Cold water comes in but no hot water. Could it be the fill valve?
For model number WTW4616FWO
Hello Michael, thank you for your question. Yes, the if the hoses and water supply were checked but the unit doesn't get hot water, the water inlet valve would have to be replaced. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
November 4, 2019
Do these washers ever get clogged and if so, how would one go about unclogging them?
For model number WTW5000DW1
Hi Patricia,
Thank you for your question. Certain washer parts may become clogged overtime through use. The drain pump may become clogged with gunk preventing the water from draining. You will need to remove and inspect the pump to verify if it is clogged. If it is you will need to either clean it or replace it. Check the hoses as well for any clogs and clean or replace them if necessary. If the detergent dispenser becomes clogged with detergent, try using distilled white vinegar to clean it. Pour it into the dispenser and run the washing machine on a regular cycle. The vinegar should remove clogs and any residue. Make sure you clean the detergent drawer every month. If the screens in the water inlet valve become calcified, you can try soaking the screens in a solution of vinegar. If they just have dust and grit on them, you can try brushing this off. This may work. The screens on a water inlet valve are fragile and can become damaged. If these methods do not help to clean them, you may need to replace the water inlet valve. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Austin
December 7, 2019
My top load washer has a slow leak coming from where the water fills the tub.Then the washer kicks on and drains itself. What could be the problem???
For model number Wtw5000dw1
Hi Austin, I was thinking a faulty inlet valve as well. It is probably your best bet to fix this symptom. Thank you for your question and good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Sue
September 19, 2019
Is there a replacement screen for the water inlet valve. If not, is there a screen that would go on the hose faucet end? We have well water and it clogs screen.
For model number Whirlpool washer WTW4815EW1
Hello Sue, Thank you for the question. Sadly, we could not find the requested parts. I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Tim
October 1, 2019
This washer won't fill with hot water it starts to but then mixes hot and cold i would like hot water is there a fix or adjustment to make.
For model number WTW 4846FWO
Hello Tim, thank you for writing. This sounds like a faulty Water Inlet Valve, this part number PS12349267 for your model. You may also want to consider the Water Temperature Switch, part number PS11752018. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12349267
Manufacturer Part Number: W11210459
