Whirlpool W11196317 - Door Gasket | PartSelect.ca
Door Gasket – Part Number: W11196317
( Grid squares measure 1x1 inch )
Door Gasket – Part Number: W11196317 Door Gasket – Part Number: W11196317 Door Gasket – Part Number: W11196317 https://partselectca.azureedge.net/Schematics/Whirlpool/GWOHKAJE.gif

Door Gasket

Your Price

CAD$85.01
On Order

PartSelect Number PS12348985
Manufacturer Part Number W11196317
Manufactured by Whirlpool

This is a door seal, but you may also know it as a door gasket and it is a part for your dishwasher. It provides a leak proof seal between the tub and the door of your appliance. You will need to replace the door seal if you are experiencing leaking from the front of your dishwasher. Once you have removed your old seal, we recommend inspecting the groove to make sure there are no food particles or debris caught inside that will impede the installation process.

This part works with the following brands: KitchenAid, Kenmore, Whirlpool, Maytag, Jenn-Air.

This part works with the following products: Dishwasher.

This part fixes the following symptoms: Leaking

Videos For installing this part.

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bobbi
February 11, 2019
Dishwasher has small leak in the front of the right lower door. Repairman appointed by american home shield brought a gasket but in looking, did not think it would work. Was visibly much wider. Cannot find a replacement on your website using the model and serial numbers. A sticker on the top of the dishwasher door listed a "part number" (9743396revc), but i do not know this relevance to the door gasket.Suggestions?
For model number KitchenAide MOD NO. KUDS24SEBL1
Hello Bobbi, Thank you for contacting us. The leak could be caused from any one of the door seals. I suggest checking the follow parts: PS356593 Lower Door Seal Kit, and PS12348985 Door Gasket. Hope this helps!

2 people found this helpful.

Was this helpful?
Don
May 7, 2019
I need the black cabinet seal, part no. 8269110, as mine is disintigrating but I was not sure this one is the correct replacement part. Will this one work with my model dishwasher?
For model number Kenmore 665.16049400
Hello Don, thank you for inquiring. For your model the inner cabinet Seal is part PS11731683 and the Door Gasket is this part PS12348985.

1 person found this helpful.

Was this helpful?
Blain
May 20, 2019
Do i need adhesive for the door gasket ps12348985? If so what do you recommend.
For model number 665.77972k703
Hello Blain, thank you for your question. There is a channel that the Door Gasket fits into to hold it on. If you find you do require adhesive, then Heat Resistant Adhesive part PS11728058 will be sufficient.

1 person found this helpful.

Was this helpful?
Joe
August 9, 2019
Replaced door gasket on dishwasher , no leaks but the door if difficult to close, i checked gasket and it seems to be properly seated , thanks
For model number kudm25shwh1
Hello Joe, thank you for contacting us. If it is not the Door Gasket part number PS11747084 for your model being incorrectly installed, then you may want to consider either the Door Spring part number PS11747091 or the Door Switch part number PS358749 for your model. I hope this helps and good luck with your repair!

1 person found this helpful.

Was this helpful?
Beverlee
August 26, 2019
I replaced the gasket, and it seems to fit, but the door will not stay shut. The new gasket seems to be bigger than the old one. Do I need to replace the strike plate and/or the door latch, as another customer had to do? Or can you suggest something else?
For model number KUDP02FRBT1
Hi Beverlee, Thank you for your question. If the door will not stay closed, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=KUDP02FRBT1&mfgModelNum=&fkMfgID=3&ModelMasterID=92714&PID=91. I hope this helps. Thank you and have a great day!

Was this helpful?
Beverlee
August 26, 2019
2nd try--i replaced the gasket, because the door was leaking. The new gasket seems to fit, but now the door will not stay closed. The door stays closed with the old gasket, so it seems the new gasket is too big. The new gasket is a different shape than the old gasket.
For model number KUDP02FRBT1
Hi Beverlee, thank you for contacting us. You are going to have to look at the parts to see why your door is not closing correctly. If you installed this part correctly and all of your parts are fine then you should have no issues closing the door. I would suggest you look at the parts and see if they are all undamaged and you may also want to make sure you installed the part correctly. We have a video above that you can look at to reference. Here is the link: https://youtu.be/GbGVrTUIczk. Good luck with your repair.

Was this helpful?
Ron
December 10, 2018
Door leaking at the corner replaced the seal still leaks , not as much. Noticed the seal was some what smaller than original, need your seal part number, i find that there to many seals with different part #'s, can i order from KitchenAid?? also should i trim any excess at the bottom of the seal
For model number kudk03itbs3
Hello Ron, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12348985. The gasket will not need to be trimmed. Hope this helps, good luck with this repair!

Was this helpful?

Customer Repair Stories

Average Repair Rating: 3.9 / 5.0, 20 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noelle from Tucker, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
W11196317, W10864081
dishwasher leaking
remove old seal, clean and dry the gap where the new seal will be installed. Apply adhessive, place new seal, then let dry for 24 hrs.

The hardest part was getting the seal, we first ordered from a sears parts store locally. They also told me that everything was included to install it, but they did not include the adhesive, they lost the order via ups and never notified me. I finally called them and they made me go back to the parts store for a refund. I then ordered on parts select and they had it in my hands in 3 days.
83 of 105 people found this instruction helpful.
Was this instruction helpful to you?
Tracy from Jupiter, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
W11196317
Door seal on dishwasher frame was brittle and deteriorated
Didn't have to remove any screws, etc. Just had to pull the old gasket out of a grove in the top and sides of the frame, clean up the particles caused by the deterioration of the old gasket, and install the new gasket. Have to be careful to start at the top center of the frame exactly in the midpoint of the gasket and carefully push the gasket into the grove with your hands. Try not to stretch the gasket. There will be about 2 inches of extra gasket laying on the bottom on each side of the dishwasher, and that is OK.
50 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Martin from Raleigh, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WP8574157, W11196317, 8193830
Door pops open easily
We have been living with this problem for a couple of years. My wife resorted to leaning a chair with a bag of potatoes against the door. As time went on, she had to use heaver and heaver potatoes. Soon, nothing would hold the door shut. As a last resort (after calling Kitchen Aid and finding out my extended warranty that was paid for 5 years wouldn't cover the repair due to some technicality), I decided to try and replace all three items that could contribute to the door not staying shut. The Strike Plate, Door Latch and Door Seal. Parts were easy to find on the web site and delivered from PartSelect in record time. The installation was fairly easy. I loosened the star head screws holding the Stainless outer front panel to the inner panel. These are located all around the inside of the door. The Stainless front panel then separated a bit, like a "V". I didn't completely remove the front panel as there seemed to be some wires connected that I didn't want to mess with. So I just tilted it forward and reached inside to remove the 2 screws holding the door latch. Replaced it and the door seal. Removing the strike plate required slipping a knife under the plate and releasing the spring prongs from he sides. It all seemed very intuitive. Even though we were expecting to be dishwasher shopping the next day - The door stayed shut and has worked great now for a month.
40 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Evan from Hudson, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
W11196317, 4172127
Dishwasher leaking water
Install was very easy. Used hands, pliers to pull out old gaskets. Wiped down old dirt in track. Started from (top) middle of door frame and used some soap with warm water to insert new gaskets. That's it! Kept old plastic brackets in place because it was too difficult to remove door springs. Old door seal and lower door seal were badly worn (gummy and falling apart) - Thought that was the issue with the water leaking. Nope, I was wrong. Looks like the tub seal, and the plastic bearing that is under the spray arm. Going to buy new instead of diving in the money pit. 10 years old, motor corroded from water over the years.
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
william from Wethersfield, CT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Parts Used:
W11196317
Seal on dishwasher worn out and coming loose.
Removed old seal, cleaned track, applied adhesive for new seal, seated new seal in track, closed door for 24 hours to allow adhesive to cure, then used dishwasher without difficulty. An easy repair.
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Bob from Lake Forest, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
W11196317
Replace old leaky door seal with replacement part
I peeled off the old seal and replaced with the new seal. The instructions were clear and easy to follow, however the new seal made the door not stay closed as the friction catch at the top was no strong enough to overcome the tension of the door closed with the new seal.

There were explicit instructions on the way the seal was to work with the sealed edge spreading into the tub area as the door closed. I was very careful to follow those instructions and made sure to seat the seal carefully. After I reinstalled the seal three times to see if I could get it to seat properly, as a last ditch effort I reversed the seal to the opposite way the instructions indicated and it worked with the door closing properly and the seal didn't leak.

Based on looking at the old seal and how it was originally installed, I actually think the seal was out of spec for the unit. However, if it isn't leaking that is what it's all about so we will see how long it holds.
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Lew from Lewiston, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
W11196317
Leeking dishwasher
Grabbed old seal and removed it.(notice how seal was situated in slot)

Pushed new seal in slot that held old seal. close door.

If dishwasher still leaks you put the seal in backward (I did!)remove seal reverse it and reinsert it.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Kenneth from Golden Valley, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
W11196317, 4172127
Dishwasher was leaking water at the door
The lower door seal had fallen out as it was worn out so I wasn't sure of the proper orientation of the new seal or even where it went as the instructions had nothing about the seal. A little bit of logical thinking and the seal just just snapped in place. The door drains that came with the kit were both a right or left hand and so I didn't install them. Turns out that I didn't need the new ones anyway. The old door seal just pulled out and the new one just pushed into place. I was careful to center the top of the strip so that it would come out even at both sides of the bottom. There were no instructions for the door seal but none were needed. As long as I was working on the washer I did some cleaning to make it look new and bright...that took the most time. Easy repair and a happy wife besides.
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Edward from Tucson, AZ
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
W11196317
Dishwasher door leaked
Just removed the old seal and followed the instructions that came with the new one. Since the old one didn't have any adhesive on it ,I didn't use the adhesice on the new one. Problem solved!
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
william from nutley, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
W11196317
washer leaked due to torn seal
Removed the old one, cleaned out the groove, dry fit the gasket, made a small cut to fit length, removed, squeezed the glue into the track and then put gasket in. Had to wait 24 hours for glue to cure.
No leaks.
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
20 Reviews
4.6
out of 5
Filter By Rating:
  • 5 Stars
    16
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5
-
Verified Purchase
Great part exactly like original

Very fast shipping. Ordered sunday afternoon received it tuesday morning. Looked just like original and fit perfectly. No more leaky dishwasher door. I will definitely order other parts when the time comes.

5
-
Verified Purchase
easy repair

fast servie

5
-
Verified Purchase
Door gasket stopped the leak. Easy to put in 2 minutes

Very fast delivery. Very helpful on the phone. Return policy is very good. You guys are on speed dial and bookmarked. Thanks again

5
-
Verified Purchase
Solved the problem

The gasket was not identical to the original, and i installed it backwards the first time, resulting in a small leak. The second time around I installed it correctly, and the leaks went away.The door of the dishwasher is more difficult to close, but it's getting easier as time goes on.I was very impressed by the efficiency of PartSelect in processing and shipping my order. I would not hesistate to order from them again.

5
-
Verified Purchase
Fast shipping, part fit perfect

Size and style of gasket was slightly different than original but it installed easy and has been leak free. Shipping was extremely fast.

5
-
Verified Purchase
I ordered the wrong part . Received the correct part and full refund promptly

The correct part fitted perfectly well . VERY courteous service .

5
-
Verified Purchase
Worked like a charm

Easy repair to my leaking dishwasher door. Fast shipping and good prices. Thanks Parts Select!

5
-
Verified Purchase
Easy repair

It was easy to put in. Unfortunately another part a grommet was leaking so I ordered that part to finish the repair job.

5
-
Verified Purchase
Door gasket replacement

Easy to select correct part, easy to install thanks to the video. Part arrived within 3 days. Very happy

5
-
Verified Purchase
Repair was a no-brainer

Delivery was quick. Two days from ordering, it was sitting at my front door ready to install. Installation was simple - take out the old one; clean track and replace. 15 minutes and I was done.

Model Cross Reference

Brand
Model Number
Description
Kenmore
665110739120
Dishwasher
Kenmore
665110739130
Dishwasher
Kenmore
665110739140
Dishwasher
Kenmore
665110739190
Dishwasher
Kenmore
66513102K900
Dishwasher
Kenmore
66513102K901
Dishwasher
Kenmore
66513102K902
Dishwasher
Kenmore
66513103K900
Dishwasher
Kenmore
66513103K901
Dishwasher
Kenmore
66513103K902
Dishwasher
Kenmore
66513104K900
Dishwasher
Kenmore
66513104K901
Dishwasher
Kenmore
66513104K902
Dishwasher
Kenmore
66513109K900
Dishwasher
Kenmore
66513109K901
Dishwasher
Kenmore
66513109K902
Dishwasher
Kenmore
66513112K700
Dishwasher
Kenmore
66513112K701
Dishwasher
Kenmore
66513112K702
Dishwasher
Kenmore
66513113K700
Dishwasher
Kenmore
66513113K701
Dishwasher
Kenmore
66513113K702
Dishwasher
Kenmore
66513114K700
Dishwasher
Kenmore
66513114K701
Dishwasher
Kenmore
66513114K702
Dishwasher
Kenmore
66513119K700
Dishwasher
Kenmore
66513119K701
Dishwasher
Kenmore
66513119K702
Dishwasher
Kenmore
66513122K700
Dishwasher
Kenmore
66513122K701
Dishwasher

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2021, Eldis Group Partnership. All rights reserved.