Whirlpool/Whirlpool_Thumb/MDBX88K1.gif
See part 1 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.ca

Mounting Plate

★★★★★
★★★★★
6 Reviews
$19.34   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12074431
Manufacturer Part Number W11025649
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
Whirlpool, Maytag, KitchenAid, Amana.
Part# W11025649 replaces these:
AP6245752, W10245177, W10440498
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Linda
    April 14, 2018
    Do the mounting screws come with the mounting bracket or separate. Wmh31017as0
    For model number Wmh31017as0
    Hi Linda, Thank you for the question. The screws are sold as part of the mounting hardware kit, PartSelect Number: PS11730898. Hope this helps!

    12 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Gus
    January 3, 2019
    We had bought 2 of these undercabinet microwaves and the one is missing the wall bracket. I just installed the one unit and the bracket was just a smaller about 2" high bracket. When i researched the part it show a u shaped bracket. I need a bracket but want to make sure i get the correct one. I've installed many microwaves and am sure that either would work, but i'm just double checking. Thanks
    For model number UMV1160CB-3
    Hello Gus, thank you for your question. This model indicates the mounting bracket is part number W11025649 and is a straight bracket. The U shaped one is not used on this unit. I hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Model
    September 11, 2019
    We need bracket for Whirlpool
    For model number YWMH31017AS3
    Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part #: PS12074431. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Vanessa
    October 31, 2019
    I need mounting bracket and screws.
    For model number WMH78019HZ
    Hello Vanessa, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS8769990 for the mounting bracket and PartSelect Number: PS11730898 for the Mounting Hardware. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Sonia
    December 28, 2019
    I have a Whirlpool microwave n the mounting bracket holds the bottom part. My microwave actually pulled out the cabinet. Just hanging by the bottom bracket which was the only one it had when I purchase it. Is there another mounting bracket more sturdier for this microwave. Show me picture please.
    For model number Wmh32519fs
    Hi Sonia, we can only recommend the official compatible parts. You can find a picture by using a search engine to search for images using the part number. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Steve
    December 29, 2019
    I need part # for all mounting and bracket needed for this under cabinet micro. Saying i need mounting plate w11025...parts select # ps12074431. is this correct. does this contain everything needed.
    For model number WMH31017AB1
    Hello Steve, Thank you for your question. The mounting bracket would need the hardware kit as well which is under part PS11730898 for your model. With the mounting plate and the hardware kit you will have everything you need. We hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Jodi
    January 29, 2020
    I need a mounting bracket and screws for the following Whirlpool over the stove type, but I cannot find this model number anywhere.
    For model number TR24112124
    Hi Jodi, Thank you for your question. The number you provide looks like a serial number. If so, the model number will be found on the same tag that you found this number. If not, here is a link from our website that you may reference on where to find the model number on your microwave, https://www.partselect.com/Find-Your-Microwave-Model-Number.aspx. We hope this helps. Thank you and have a great day.

    Was this helpful?
    Thank you for voting!
    Jaime
    May 28, 2019
    I need a paper or cardboard pattern to show where i drill, can you supply me one? Thanks
    For model number wmh31017fs0
    Hello Jaime, thank you for inquiring. The Mounting Plate Template for your model is part PS2362798.

    Was this helpful?
    Thank you for voting!
    Teresa
    June 6, 2019
    Will this fit this model
    For model number Mmv4206fz
    Hello Teresa, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12074431. The hardware PartSelect Number PS11730898 is not included with the plate. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 2.7 / 5.0, 5 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Demo stove exhaust fan and tile backsplash, install over range microwave, rotate exhaust fan and adjust exhaust plenum.
        Whirlpool Microwave was purchased as used item, so installation in a new location required purchase of mounting template, wall bracket, mounting hardware. Granite backsplash cut out using wet/dry diamond blade and Ryobi 6.5 inch saw. Microwave exhaust fan removed and rotated for upward exhaust using modified exhaust plenum from existing stove exhaust hood. Installation of Microwave was the simplest part of the job. All mounting materials worked as required. A list of the materials provided in the hardware mount kit would be helpful, I would not have had to order the top mount screws separately if it was clear that they were included in the kit. Otherwise, no complaints.
        • rebecca from LA CANADA FLT, CA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          More than 2 hours
        • Tools:
          Screw drivers, Socket set
        12 of 15 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Getter level with cabinet and use stud finder to make it easy.
        I measured. I leveled. I mounted hanging bracket and here's where it got tricky because you need two people to raise the microwave into position. I'd stack 2x4's In the back by the wall. I'd stackem in the front on the cabinet top then raise the back and add more. You get it front back front back until it's high enough to snag the bracket. Holes pre drilled raise it on up tighten bolts and poof you're done!! I did loosen the screws that pull the cabinets together and the bottom screw that holes the cabinet on one side. It didn't seem like it needed it the way it slipped in but maybe it slipped in because I did it. Only takes a minute. Use a minute here save an hour there. Go do it! Times a wastin!!
        • Terry from CENTRAL, IN
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Screw drivers
        • Parts Used:
          W11025649
        4 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        needed microwave mounting bracket
        mounted bracket, case closed.
        • Patrick from MAYS LANDING, NJ
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          W11025649
        3 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Wrong mounting plate
        Two Mounting plates # PS12074431 were sent to me and both do not fit.
        Model number MMV1175JZ-0
        Serial number TRX-17. 24546
        Manufactured April 2020
        Contacted Maytag and even sent pictures to show the problem with alignment of the mounting plate not fit in the back of the microwave.
        • Theodore from SEBRING, FL
        • Difficulty Level:
          Very Difficult
        • Total Repair Time:
          More than 2 hours
        • Tools:
        • Parts Used:
          W11025649, W10190018
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Mounting plate support edge broken
        I removed the microwave to install a back splash and found the support edge on the backplate had broken off and was missing. I searched for parts for the microwave and found them on PartsSelect.com. Easy to order, and was shipped promptly.

        Once the part arrived, install was simple, lining up the existing holes. The only hard part was setting the microwave up on the bracket due to the weight and awkwardness of the microwave.

        Overall a very simple repair.
        • Glen from GLIDDEN, WI
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        • Parts Used:
          W11025649
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          6 Reviews
          3.7
          Filter By Rating:
          • 5 Stars
            3
          • 4 Stars
            1
          • 3 Stars
            0
          • 2 Stars
            1
          • 1 Star
            1
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS12074431
              Manufacturer Part Number: W11025649
              Brand
              Model Number
              Description
              Amana
              AMV1150VAB2
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAB3
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAB4
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAB5
              Microwave - MICROWAVE
              Amana
              AMV1150VAB6
              Microwave - MICROWAVE/HOOD COMBO
              Amana
              AMV1150VAD2
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAD3
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAD4
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAQ2
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAQ3
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAQ4
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAS2
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAS3
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAS4
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAS5
              Microwave - MICROWAVE
              Amana
              AMV1150VAS6
              Microwave - MICROWAVE/HOOD COMBO
              Amana
              AMV1150VAW2
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAW3
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAW4
              Microwave - MICROWAVE OVEN 1.5 CU. FT.
              Amana
              AMV1150VAW5
              Microwave - MICROWAVE
              Amana
              AMV1150VAW6
              Microwave - MICROWAVE/HOOD COMBO
              Amana
              AMV2174VAB5
              Microwave - MICROWAVE HOOD COMBO
              Amana
              AMV2174VAB6
              Microwave - MICROWAVE HOOD COMBO 1.7 CUBIC FEET
              Amana
              AMV2174VAD5
              Microwave - MICROWAVE HOOD COMBO
              Amana
              AMV2174VAD6
              Microwave - MICROWAVE HOOD COMBO 1.7 CUBIC FEET
              Amana
              AMV2174VAS5
              Microwave - MICROWAVE HOOD COMBO
              Amana
              AMV2174VAS6
              Microwave - MICROWAVE HOOD COMBO 1.7 CUBIC FEET
              Amana
              AMV2174VAW5
              Microwave - MICROWAVE HOOD COMBO
              Amana
              AMV2174VAW6
              Microwave - MICROWAVE HOOD COMBO 1.7 CUBIC FEET
              Amana
              AMV2175CB0
              Microwave - MICROWAVE HOOD COMBINATION

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service