Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chris B - December 2, 2023
Verified Purchase
Part was exactly what I needed
The part was exactly what I needed. Arrived in a timely fashion.
★★★★★
★★★★★
Andrea D - February 13, 2021
Verified Purchase
Exactly as required
Exactly what I need!! Perfect fit
★★★★★
★★★★★
Chris K - July 20, 2020
Verified Purchase
Microwave Part Arrived Fast and worked like a Charm!
My Tenant is Happy that everything worked out so Quickly!Thanks again,
★★★★★
★★★★★
Evelyn L - July 3, 2020
Verified Purchase
worked as hoped
part was slightly bend but since it was pliable it worked
★★★★★
★★★★★
Anna B - April 14, 2020
Verified Purchase
Damaged part
Received the part and had to go buy it again as the part was bent in the box. It’s a mounting bracket that I don’t trust to hold up my microwave if it’s been bent in half.
★★★★★
★★★★★
Candice H - March 25, 2019
Verified Purchase
Microwave mounting bracket
Correct part and fast delivery. Saved me a lot of money.
★★★★★
★★★★★
Jody S - December 1, 2018
Verified Purchase
Not as pictured
Part arrived bent. use it anyways.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Demo stove exhaust fan and tile backsplash, install over range microwave, rotate exhaust fan and adjust exhaust plenum.
Whirlpool Microwave was purchased as used item, so installation in a new location required purchase of mounting template, wall bracket, mounting hardware. Granite backsplash cut out using wet/dry diamond blade and Ryobi 6.5 inch saw. Microwave exhaust fan removed and rotated for upward exhaust using modified exhaust plenum from existing stove exhaust hood. Installation of Microwave was the simplest part of the job. All mounting materials worked as required. A list of the materials provided in the hardware mount kit would be helpful, I would not have had to order the top mount screws separately if it was clear that they were included in the kit. Otherwise, no complaints.
Getter level with cabinet and use stud finder to make it easy.
I measured. I leveled. I mounted hanging bracket and here's where it got tricky because you need two people to raise the microwave into position. I'd stack 2x4's In the back by the wall. I'd stackem in the front on the cabinet top then raise the back and add more. You get it front back front back until it's high enough to snag the bracket. Holes pre drilled raise it on up tighten bolts and poof you're done!! I did loosen the screws that pull the cabinets together and the bottom screw that holes the cabinet on one side. It didn't seem like it needed it the way it slipped in but maybe it slipped in because I did it. Only takes a minute. Use a minute here save an hour there. Go do it! Times a wastin!!
Other Parts Used:
Terry from CENTRAL, IN
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
needed microwave mounting bracket
mounted bracket, case closed.
Other Parts Used:
Patrick from MAYS LANDING, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a cabinet person install new kitchen cabinets and counter top. After the demolition of the the old cabinets, I had to buy new parts for the new instal
I had the help of a handyman, I'm 75 years young but not handy with tools
I removed the microwave to install a back splash and found the support edge on the backplate had broken off and was missing. I searched for parts for the microwave and found them on PartsSelect.com. Easy to order, and was shipped promptly.
Once the part arrived, install was simple, lining up the existing holes. The only hard part was setting the microwave up on the bracket due to the weight and awkwardness of the microwave.
Overall a very simple repair.
Other Parts Used:
Glen from GLIDDEN, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wrong mounting plate
Two Mounting plates # PS12074431 were sent to me and both do not fit. Model number MMV1175JZ-0 Serial number TRX-17. 24546 Manufactured April 2020 Contacted Maytag and even sent pictures to show the problem with alignment of the mounting plate not fit in the back of the microwave.
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
April 14, 2018
Do the mounting screws come with the mounting bracket or separate. Wmh31017as0
For model number Wmh31017as0
Hi Linda, Thank you for the question. The screws are sold as part of the mounting hardware kit, PartSelect Number: PS11730898. Hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Gus
January 3, 2019
We had bought 2 of these undercabinet microwaves and the one is missing the wall bracket. I just installed the one unit and the bracket was just a smaller about 2" high bracket. When i researched the part it show a u shaped bracket. I need a bracket but want to make sure i get the correct one. I've installed many microwaves and am sure that either would work, but i'm just double checking. Thanks
For model number UMV1160CB-3
Hello Gus, thank you for your question. This model indicates the mounting bracket is part number W11025649 and is a straight bracket. The U shaped one is not used on this unit. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Model
September 11, 2019
We need bracket for Whirlpool
For model number YWMH31017AS3
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part #: PS12074431. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sonia
December 28, 2019
I have a Whirlpool microwave n the mounting bracket holds the bottom part. My microwave actually pulled out the cabinet. Just hanging by the bottom bracket which was the only one it had when I purchase it. Is there another mounting bracket more sturdier for this microwave. Show me picture please.
For model number Wmh32519fs
Hi Sonia, we can only recommend the official compatible parts. You can find a picture by using a search engine to search for images using the part number. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Steve
December 29, 2019
I need part # for all mounting and bracket needed for this under cabinet micro. Saying i need mounting plate w11025...parts select # ps12074431. is this correct. does this contain everything needed.
For model number WMH31017AB1
Hello Steve,
Thank you for your question. The mounting bracket would need the hardware kit as well which is under part PS11730898 for your model. With the mounting plate and the hardware kit you will have everything you need. We hope this helps!
I need a mounting bracket and screws for the following Whirlpool over the stove type, but I cannot find this model number anywhere.
For model number TR24112124
Hi Jodi,
Thank you for your question. The number you provide looks like a serial number. If so, the model number will be found on the same tag that you found this number. If not, here is a link from our website that you may reference on where to find the model number on your microwave, https://www.partselect.com/Find-Your-Microwave-Model-Number.aspx. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
James
October 18, 2021
I need the mounting bracket part number for microwave YWMH31017HB. I ordered bracket W11025649 but it is not the right one
For model number YWMH31017HB
Hello James, Thank you for the question. Very sorry, Manufacturer Part Number W11025649 is the only bracket Whirlpool lists for your model. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the appliance directly. Ask them for them for a different part number you require and contact back to see if it is something we carry. We hope this helps!
Was this helpful?
Thank you for voting!
Julie
February 7, 2022
Hello, will this part mount the Model #MM1175JZ00 Maytag 30" microwave oven?
For model number MMV1175JZ00
Hello Julie, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12074431 for the Mounting Plate and PartSelect Number PS11730898 for the Mounting Hardware. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Sanjay, thank you for your question. For model WMHA9019HZ0, the bracket part number is PartSelect Number PS12074431. We hope this helps.
Was this helpful?
Thank you for voting!
Bridgette
January 21, 2023
Looking for hardware kit and temp plate for the above model number, also does the hardware kit have the top screws for the microwave or are they separate?
For model number YAMV2307PFW04
Hello Bridgette, we are glad you asked! The Hardware Kit is PS11730898 and it does have the top screws. However, the Template PS3514774 is discontinued. We are pleased to have been able to help.
This is a manufacturer-approved mounting kit for your microwave. This kit is crucial for keeping your microwave securely wall-mounted. This kit does not include the mounting plate itself. This kit comes in handy if you b...
