Whirlpool/Whirlpool_Thumb/0XW0IVKY.gif
See part 10 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.ca

Worm Gear

★★★★★
★★★★★
65 Reviews
$22.06   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12070620
Manufacturer Part Number W11086780
Manufactured by Whirlpool
Product Description

Worm Gear Specifications

This is a manufacturer-approved gear, used in stand mixers.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# W11086780 replaces these:
AP6048307, 9703543, 9706529, W10916068, WP9706529
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

11 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thu
June 10, 2019
Is this worm gear compatible to this model number?
For model number KV25G0XMC
Hello Thu, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12070620. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Mariyam
September 25, 2019
My stand mixer model number is kp26m1xacs gear number please
For model number Kp26m1xacs
Hi Mariyam, the worm gear number is W11086780 for Kp26m1xacs and Hub gear is part W11192795. Thank you for your question and good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Jiamin
April 24, 2018
Will this part work on my model? KitchenAid kp26m1xnp 6 qt. Professional 600 ? Thanks.
For model number KitchenAid KP26M1XNP 6 Qt. Professional 600
Hello Jiamin, thank you for your question. There are two worm gears listed for your appliance, one is Stand mixer worm follower gear Parts #: W10916068 and the other is Stand mixer worm gear Parts #: 9709231 Substitution: WP9709231. The part number W11086780 is not listed as a compatible part. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Kari
February 5, 2019
My mixer is hit and miss with the planetary moving the whisk etc. It stops working with a heavy load such as kneading bread dough. It is working with nothing to mix right now. I think it is the worm gear. I need to get a replacement to fix it.
For model number KG25H7XWH (5 qrt)
Hello Kari, thank you for your question. There are two worm gears in the unit and usually need to be replaced together. They are part numbers PartSelect Number: PS12070620 and PartSelect Number: PS11747012. Please enter the part number into the site for current price and availability. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Bart Kawalko
April 19, 2018
Will parts from kp26m9cuu5 work on kp26m9cuu serial number w63287318?
For model number KP26M9CCU
Hi Bart, Thank you for your question. Based on model numbers that are similar to yours, the parts should work on your mixer. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Miroslav
May 4, 2018
Looking for parts no. Working on my mixer : Worm gear, front + rear bearing, worm trust bearing
For model number KP26M1XRC
Hi Miroslav, Thank you for your question. I have listed the two other parts that you are looking for in links down below for you. Good luck with your repair.

Was this helpful?
Thank you for voting!
Related Parts:
Obi
October 10, 2019
Hi, does this part ps12070620 worm gear work on my 4kp26m1xnp5 kitchen aid mixer?
For model number 4KP26M1XNP5
Hello Obi, thank you for your question. Yes, this Worm Gear part number PS12070620 is the correct replacement for your model. Good luck with your repair!

Was this helpful?
Thank you for voting!
Fernando
December 12, 2019
Please help me confirm if follower gear w11086780 is used in the model number provided for the KitchenAid stand mixer 5qt.Thank you
For model number KG25H0XOB5
Hello Fernando, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS12070620. Hope this helps!

Was this helpful?
Thank you for voting!
Lester
December 26, 2019
I have replaced the wormgear in my 475,550,575 watt, can i get a better replacement gear?Seems to be a very weak point
For model number 4kp26m1xlc5
Hello Lester, thank you for your inquiry. Unfortunately the only worm gear available is part number PS12070620. I hope this information helps!

Was this helpful?
Thank you for voting!
David
December 29, 2019
Is this worm gear compatible to this model number? Thanks. For model number 4KG25H3XER.
For model number 4KG25H3XER
Hi David, Thank you for your question. Yes, this would be the correct worm gear for your mixer. We hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 28 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
wouldnt turn beaters
removed metal strap around motor housing then remove the 4 screws holding top motor cover on, then removed the 4 screws that hold gear cover in place, remove long gear that is driven by the motor gear, then with ring pliers remove ring off long drive shaft and lift off worm gears. once all gears are removed --removed all the old grease ( do this to get all the metal shavings out from the failed gear) repace the grease in the gear housing and reassemble in reverse order
  • Barry from Rowland Heights, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    W11086780
85 of 92 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mixer Made Very Bad Grinding Noise, And Would Skip While Making Bread Dough
1, Removed trim piece (1 screw) 2, removed cover (4 screws) 3, removed speed switch assembly (2 screws) 4, removed gear cover (4 screws) 5, removed and examined 2 worm gears for wear. Gear cover was badly cracked, don"t know if it was caused by a previous repair or by heat, as old cover is plastic. Received new parts and installed them, 2 bearings, 2 worm gears, 1 new cover of diecast metal and a new gasket. All repairs made with a #2 phillips screw driver. My wife then made bread, and it preformed flawlessly.
67 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gears Stripped on Stand Mixer
Bought a KitchenAid Pro Series stand mixer from Sam's Club about five years ago. The transmission gears stripped. It is failry easy to replace but you need to replace the worm gear and the pinion at the same time. Make sure all the old grease is removed completely to ensure no old shavings reaming in the transmission housing. Also, if you have a fiberglass transmission housing, inspect the housing closely to indetify any hairline fractures and do not fill the transmission assembly with too much grease becasue you need room for the housing to breathe when the unit is in operation. If you fill the housing too much and tighten it, it "WILL" crack the housing. You want enough gree to keep the asssemnly lubricated but not too much that when you run the mixer that it expands and cracks the housing.
  • Gary from Plano, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
  • Parts Used:
    W11133646, WP9709231, W11086780
34 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
mixer does not mix 4 cups of flour with 6 eggs very easily
sat on the kitchen table and with a screwdriver started to disasemble the mixer,hardest part was taking snap ring off (easy after you buy snap ring pliers)as gears were lifted off noticeable wearing was present on all parts. the bearing housing on the gearcase was broken lose, the only major expense. the other parts are not expensive so i decided to renew all parts. glad i did felt proud of myself when job was done. would do it again Joe
17 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No beater rotation (stops in one place)
Remove the top cover. Loosen the circuit board and remove the gear case. Remove the retaining clip on the gear shaft and remove the gears. Clean the old grease out and relube. reassemble in reverse order . Not a bad job at all.
  • Ken from Spicewood, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
  • Parts Used:
    W11086780
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
worm gear stripped
Removed the lid of the mixer. Cleaned all grease and removed the worm gear. Installed new gear and packed with new grease Installed lid and checked worked perfect. Easy repair.
  • Frederick from New Hartford, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WP9707223, W11086780
13 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
worn gears had to be replaced (second time)
the hardest part is removing the retaining ring (didn't buy pliers)after that it is very easy, remove ring, top gear, center pin, bottom gear,worm gear(was removed first)the grease is pretty nasty,clean off the old grease and put it all back the way it came apart,with new grease.And then PRAY !!!!!!! THANK YOU PARTS SELECT for your wonder smart staff.
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
kitchen aide stand mixer - epicurian 6 quart model
after numerous calls to kitchen aide and ka repair centers - i decided that their remedy was to sell me a new or refurbished model -- so i decided to try the repair myself - why not - the appliance didn't function and their fix again was close to the price of a new one --- the fix - remove the band (small screw in back --- 4 screws hold on the top of the mixer - remove them and pull off the top -- the gears are at the front -- four screws hold the top in place- remove them and pull off the cover -- this is where it gets interesting - it's a little messy with the grease -- but clean out as much as possible --
the toughest part is then removing the retaining clip --- (a tool is avail at numerous hardware stores that will make it a bit easier about $20. ) but pry the clip up and slide off top -- remove gear - clean out completely - remove all old grindings -- replace gears -- add grease and reverse order... great fix -- even with purchase of pliers it was cheaper than any offer from kitchen aide....
  • andy from hanover, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
  • Parts Used:
    W11086780
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The front gear was worn
I took all the grease out of the top of the mixer. Saw that the gear was worn. When the new parts came I put as much grease in as was in before. Put it back together and it worked like a champ.
  • Marcelline from PENFIELD, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WP9709231, W11086780, W11200218
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
gears broke
remov5 screws then snap ring thenn 4 screws then reploace with new parts and put back together
6 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
65 Reviews
4.9
Filter By Rating:
  • 5 Stars
    58
  • 4 Stars
    6
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12070620
Manufacturer Part Number: W11086780
Brand
Model Number
Description
KitchenAid
4KB25G1XBU3
Mixer
KitchenAid
4KB25G1XBU5
Mixer
KitchenAid
4KB25G1XBY5
Mixer
KitchenAid
4KB25G1XCO5
Mixer
KitchenAid
4KB25G1XER3
Mixer
KitchenAid
4KB25G1XER5
Mixer
KitchenAid
4KB25G1XGA5
Mixer
KitchenAid
4KB25G1XMC5
Mixer
KitchenAid
4KB25G1XMY5
Mixer
KitchenAid
4KB25G1XOB3
Mixer
KitchenAid
4KB25G1XOB5
Mixer
KitchenAid
4KB25G1XTG3
Mixer
KitchenAid
4KB25G1XTG5
Mixer
KitchenAid
4KB25G1XWW3
Mixer
KitchenAid
4KB25G1XWW5
Mixer
KitchenAid
4KD2661XMC3
Mixer
KitchenAid
4KG25G0XMC4
Mixer
KitchenAid
4KG25G0XWH4
Mixer
KitchenAid
4KG25G7XER4
Mixer
KitchenAid
4KG25G7XOB4
Mixer
KitchenAid
4KG25G7XSL4
Mixer
KitchenAid
4KG25G7XWH4
Mixer
KitchenAid
4KG25H3XER5
Mixer
KitchenAid
4KG25H3XOB5
Mixer
KitchenAid
4KG25H3XSL5
Mixer
KitchenAid
4KG25H3XWH5
Mixer
KitchenAid
4KN15C1XER1
Mixer
KitchenAid
4KN15C1XMC1
Mixer
KitchenAid
4KN15C1XOB1
Mixer
KitchenAid
4KN15C1XWH1
Mixer

Get in touch, we're here to help!

Open until 10PM EST

Contact Customer Service