This is the door gasket for your freezer. It is white in color and made of rubber. The door gasket covers the circumference of the freezer door and creates a seal. If the gasket is loose or worn out, cold air can leak out of the freezer, and it can force the refrigerator to work harder to remain cool. If you notice that your freezer is running for longer than normal, of if there is excessive frost buildup, you may need to replace the door gasket. This part is sold individually and it is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Frost buildup | Too warm
This part works with the following products:
Freezer.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Westinghouse.
Part# 5304507201 replaces these:
AP6037541, 216522306, 216522356, 5304507209
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Luanne K - June 17, 2022
Verified Purchase
Easy Install
Ordered this to replace the seal on freezer. I was able to do replacement myself with common household tools. Made a huge difference in frost buildup.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 7 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
bad gasket let ice form on inside of door
its best to use power screw driver lot of screws .took out all screws took off door took out side to remove ice from door. just used water to melt ice. took off old gasket and put on new gasket. put door in place and started screws in four coners do not tighten screws at this point.put in rest of screws. work arondclock wise making sure gasket is seated while tighing screws. check gasket for flatness you may have to use hair dryer on gasket to make it flat.
Other Parts Used:
alfred from college station, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
53 of 58 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaky freezer gasket
Simply unscrew panel but do not remove it. Remove old gasket. Fit new gasket between panel and door. Fasten screws and no more leaks and better temperature contol. This was so easy and rejuvenated my freezer. Thank you for quick shipment, great service, easy to navigate website, and fast phone help. I highly recommend your company. good luck with your repairs that you can do, as I have zero mechanical ability and did it !!!!
Other Parts Used:
James from Shelby, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
36 of 44 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Getting frost build up on the inside at the top of the door .
removed door and took all the screws out of the inside door rack. removed old door seal . replaced door seal and made sure that the seal fit around and door rack fit into the groove then replaced all screws and tightened choosing random sections to tighten .replaced the door plugged back in wires that I removed and replaced door hinge screws . Shut door and checked sealing 2 hours later .Complete seal .
Other Parts Used:
Gene from VICTORVILLE, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer was frosting too much for air getting in the side of freezer gasket seal.
Loosen screws, removed old gasket seal, replace with new gasket (nice to use 2 sets of hands) and re screwed. Used hairdryer to heat up and fluff out a spot that wasnt seal all the way. Pretty simplementation to do.
Other Parts Used:
Mary from LE ROY, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change freezer door gasket
I wasn't able to do repair because we received the wrong parts. I have called no less than 5 times and got a hold of one person. I was told you'd be sending a return label by email. No return label has been sent and its 6 days later. You're delay is forcing us outside of the 30 day return period. I hope you keep your word and give me my money back.
Removed old gasket, then installed new gasket. Make sure to allow new gasket to set out for a few days prior to installing to get all wrinkles out, use a heat gun after installing to make gasket shape to freezer door.
Other Parts Used:
Henry from BYRON, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Condensation around inside the door
Unscrew all the fasteners from the door inner cover from the bottom to top to hold it in position, got rid of the old gasket.
I Cleaned all and install the new gastket into the door inner cover. then reintalled cover to the starting from the top to bottom to hold it in place.
this is a one man job but with two will be easer
Other Parts Used:
Sixto from MIAMI, FL
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
February 27, 2020
I am getting frost build up all around the door. As it melts i am getting water on the floor. I think i need to replace the gasket. Is this something i can do as a diy and which gasket do i order?
For model number Kenmore 253.28262801
Hello John, thank you for your question. You can definitely replace the gasket as a DIY'er. The door gasket is PartSelect Number: PS11770645. The best thing to do is simply unscrew panel but do not remove it. Remove old gasket. Fit new gasket between panel and door. Fasten screws and there should be no more leaks. A good tip before installing the gasket is to use a hair dryer to warm the gasket, or set it in a tub of hot water to get any wrinkles out. I hope this helps.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Diana
November 27, 2017
Does this gasket fit a 16.7 cf upright Frigidaire freezer. Llfu1766gw
For model number Llfu1766gw
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11770644. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cornelia
October 12, 2023
Could I have the total length and width of this seal?
I am having a hard time to cross reference the Sears Canada model number I have with the actual manufacturer's one (Frigidaire).
For model number Sears Canada 970-247622
Hi Cornelia, thank you for contacting us. The approximate length of the gasket you mentioned is 54.54 inches, and the width is 27.17 inches. We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ken
December 31, 2019
Kenmore/coldspot upright manual defrost freezer. Need door gasket. Which is the correct part/part # for this model.Thanks
ken
For model number 106. 8263980
Hello Ken and thank you for writing.
Door gasket part number: PS328678 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
I am I am looking for the door gasket for this freezer. Can you please send me a link to the correct part number for. Got it on your site and think I have the right one but I am not positive thank you.
For model number FFU14F5HWN
Hello Pam, Thank you for your inquiry. We confirm that PS11770645 (that you referenced in the request) is the correct part. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mya
June 20, 2019
I need a door gasket for upright freezer FFU14FC4AW0. Will this one work?
For model number FFU14FC4AW0
Hi Mya,
Thank you for your question. Yes, this gasket would be the correct part for your freezer. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
We
September 21, 2022
What is the outside dimensions of the gasket or the door. Thanks
Hello WE, Thank you for your inquiry. We show the measurements of this gasket as 27.25 inches by 54.5 inches. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Connie
December 1, 2022
Need freezer door seal for this freezer,can you help give me right one to order.
For model number LFFJ1424DW13
Hello Connie, thank you for your question. This Door Gasket, part number PS11770645, is compatible with your model. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
Louis
April 7, 2022
will this work with the above model?
For model number fu188rrw3
Hi Louis,
Thank you for your question. This would not be the correct door gasket for your freezer. The part number listed under your model number for the door gasket is PS447451. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Hello . . . I need a bottom freezer door gasket for the above mentioned Kenmore bottom freezer door. Thanks/
For model number 253.70413413
Hello Frank and thanks for writing.
Freezer gasket Part Number: PS11704172 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
