Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cindy S - March 26, 2023
Verified Purchase
Easy repair.
This part was easy to replace and my stove is working great!
★★★★★
★★★★★
Erin H - April 23, 2019
Verified Purchase
Great part
The part came a lot faster then I expected. It was a substitute part number so I was worried it was the same but it was. Very happy
★★★★★
★★★★★
Sherry M - June 11, 2021
Verified Purchase
Easy Repair and the part was the exact match!
Was so pleased with this company for its great list of stock items and how easy and fast we received our order . Hats off to you and your staff !! We will definitely be a repeat customer and proud to share your company with all our family and friends :) Stay safe !!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 27 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
our oven would not heat up
My husband pulled out the stove turned the gas off then he pulled out the part and replaced igniter....it took only about 20 min to do this job it was very easy and prior to us doing ourselves i called a well known company that does home repairs, I also called a few smaller businesses and to replace this part was anywhere from $175- 250 if not more. we are very very happy with our decision to replace the part ourselves unstead of spending extra money we didnt have .
Other Parts Used:
sharnette from baltimore, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
91 of 107 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The igniter would turn orange but wouldn't fire up, so the oven wouldn't heat up.
I just unscrewed the old one out, which was 2 screws and screwed this one in. But the thing that was best of all was how fast the part came in. It literally came the next day.
Other Parts Used:
Lisa from Livermore, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
28 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat.
Installing the part was really easy. I first turned the gas off, simply remove two screws tht hold the igniter in place. I then remove four screws from the back panel and disconnected the part. The feedback from other users on your site made me realize how easy it was. It took less than thirty minutes.
Other Parts Used:
Nedra from Alsip, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
26 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat in the Broiler/oven.
Removed the panels, disconnected and dismounted the igniter and installed the new one. Pretty simple.
Other Parts Used:
Matthew from Reno, NV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
17 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat
Amazing after two years off frustration due to unsurety of problem went to your site found part problem in question that matched my problem.two screws and a plug now im burning like im supposed to.success
Other Parts Used:
sean from san bernardino, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
14 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter glowed but oven would not light
We looked up the trouble shooting page on PartsSelect and ordered the part recommended. Part arrived very quickly. Simple installation, two screws and plug in. Problem fixed.
Other Parts Used:
Kenneth from Garden Valley, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
12 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignitor would glow but not power gas valve
New ignitor fixed the problem
Other Parts Used:
Jacquelyn from Billerica, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
11 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would glow but stove would not light
Pull bottom draw out and there it was
Other Parts Used:
john or gwen from HEPHZIBAH, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
8 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas oven only lite periododically
Unplugged 110 cord from outlet. Shut off gas supply. Removed rear cover (4) screws to access plug to ignitor. Removed boiler stove bottom drawer to access ignitor removed 2 machine screws 5/16 nut driver for ignitor replaced ignitor. I did no trouble shooting just took logical guess.
Other Parts Used:
Dan from KIESTER, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven stopped Heating
This repair was easy as could be to screw take off the diffuser four screws in the back two little screws on the igniter
Other Parts Used:
Luke from MOLINE, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
18 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
April 4, 2018
Preheated the oven and after 30 minutes the temp did not change on the display i opened the oven and it was still cold, not warm at all. I cancelled everything and tried again but it didn't work. Which part do you think is best for me? Thank you
For model number wfg505m0bw0
Hi Mary,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Rene
January 13, 2018
Is the part that I am going to order going to fit my model? I had ordered an oven igniter from a different company, and the one they sent was not the one they had in the picture. It did not come with the plug in adapter. I just want to make sure before I order it, thanks
For model number SF315PEPQ1
Hello Rene, Thank you for the question. Yes, the PS11770066 is the correct igniter for the model number provided. This flat style gas oven igniter has ceramic housing and comes with a connector. Good luck with the repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Tony F Napolitano
September 29, 2017
Just received part igntor-oven. Took the old part off, but the plug goes in back of the panel. How do i get to the plugin
For model number SF315PEMW1
Hi Tony,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the oven igniter. You will find the video under part number PS1573892. I hope this helps. Thank you and have a great day!
Does this part glow the whole time the oven is being used?
For model number WFG320M0BS0
Hello Gefro, Thank you for the question.The oven igniter will stay on continuously while the burner is operating. The igniter will turn off once the oven reaches the set temperature and then it will come back on and stay on again when needed to ignite the burner to maintain the oven set temperature. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Raymond
September 30, 2019
My oven will not lite. It seems as if its not getting any gas from the gas line. The igniter glows very bright though. What should I check first?
For model number FGP305KW2
Hello Raymond, Thank you for the question. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. They can glow but not be strong enough to open the valve. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mari
June 4, 2019
The oven igniter was replaced by local technician. Oven lights only at 350-375 and then turns off when oven reaches that temperature. If i turn the oven control to a lower temperature, it goes out. I cannot cook that way. What needs to be done?
For model number AGG222VDW1
Hi Mari,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lisa
November 17, 2019
My oven won’t heat up and we smell gas. Would this be the igniter
For model number SF114PXSW2
Good Day Lisa. Thank you for your question in regards to your unit (Model Number SF114PXSW2). The following link will bring you to a list of parts that you may need to replace in order to solve the problem that you are having: https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=SF114PXSW2&mfgModelNum=&fkMfgID=3&ModelMasterID=114427&PID=51. Hope this helps. Best Regards.
Was this helpful?
Thank you for voting!
Brittany
August 10, 2021
My Whirlpool gas stove burners work and light but when turning on the oven it lights but doesn't heat properly the temp does not change but when opening the oven it has little to no heat not enough to cook. What could the problem be?
For model number WFG320M0BW
Hello Brittany, Thank you for the question. We suggest testing the Oven Sensor. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!
Try to start oven, nothing. Igniter does not glow. Igniter or temp sensor?
For model number WFG320M0BB
Hello John, Thank you for the question. We suggest testing the Igniter. On a good igniter, there should be between 40 & 400 OHMS. A bad igniter will show no resistance or continuity. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Scott
April 25, 2022
I need oven igniter for WFG320M0BS
For model number WFG320M0BS
Hello Scott, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11770066. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11770066
Manufacturer Part Number: W10918546
